Elastodrain EL200
Application

Install by loose laying over the separating layer, onto the root resistant membrane below. The studs should be uppermost (except when used in isolation under heavy plant, when boards can be laid upside down, to allow passive drainage). Butt joint the board edges together. The panels can be cut to fit around protrusions with a heavy duty knife or a small toothed saw to fit around protrusions. Overlay with appropriate filter sheet and substrate.

Description

Elastodrain EL200 is a compression moulded protection and drainage sheet manufactured from recycled rubber crumb, flat on one side and studded on the other. The product can withstand heavy traffic during construction and is spade resistant. The product allows aeration of the substrate and provides heavy duty protection to the underlying membrane.

Application:

Install by loose laying over the separating layer, onto the root resistant membrane below. The studs should be uppermost (except when used in isolation under heavy plant, when boards can be laid upside down, to allow passive drainage). Butt joint the board edges together. The panels can be cut to fit around protrusions with a heavy duty knife or a small toothed saw to fit around protrusions. Overlay with appropriate filter sheet and substrate.

General information

Uniclass 2015

Pr_25_57_51_74 Rubber studded sheetsPrimary

CAWS

Q37/350 Drainage layer

Specification data - Rubber studded sheets

Product Reference

Elastodrain EL200

Standard product features

Colour:

Black.

Thickness:

20 mm.

Stud height:

14 mm.

Stud dispersal:

600/ m².

Panel size:

1000 x 1000 mm.

Dry weight:

14 kg/m².

Compressive strength:

>400 kN/m².

Similar products from Alumasc Building Products Ltd