EA Patch fittings
Description

Patch fittings for single action glass doors, offset hung in frames or in toughened glass assemblies. Fittings provide optimum clamping surfaces, and require minimal glass preparation.

Suitable for 10 mm and 12 mm glass; fittings can be adapted for 8 mm glass using additional gaskets.

Patch fittings for doors in rebated frames are supplied, as standard, prepared for 24 mm deep rebate. They can be supplied to suit rebate depths from 15–23 mm and 25–40 mm.

Top centre frame portions are prepared to suit wood and steel frames; for aluminium frames contact DORMA UK, giving details of aluminium system.

Patch fittings for doors in toughened glass assemblies have a 36 mm offset (43 mm from pivot point to glass surface)

Door parameters:

– Offset hung doors in rebated frames (up to 24 mm rebate):

  • Weight (maximum): 90 kg per leaf.
  • Width (maximum): 1000 mm, or 1100 mm using a bottom door rail.

– Offset hung doors in rebated frames (25–40 mm rebate):

  • Weight (maximum): 80 kg per leaf.
  • Width (maximum): 900 mm, or 1000 mm using door rails.

– Offset hung doors in toughened glass assemblies:

  • Weight (maximum): 100 kg per leaf.
  • Width (maximum): 1100 mm, or 1200 mm using door rails.

– Gap required between leaves on pairs of doors in toughened glass assemblies:

  • Individual leaf width 400–600 mm: 8 mm gap.
  • Individual leaf width 600–1000 mm: 6 mm gap.
  • Individual leaf width over 1000 mm: 4 mm gap.

A range of matching locks and strike boxes is available – see DORMA SG range.

General information

Uniclass 2015

Pr_20_29_34_35 Glass patch platesPrimary

CAWS

L20/460 Frameless glass doors

Specification data - Glass patch plates

Product Reference

DORMA EA range

Bottom patch

02.100

02.101

02.102

02.103

02.104

02.105

02.106, for ___ mm rebate

02.107, for ___ mm rebate

02.108, for ___ mm rebate

02.109, for ___ mm rebate

02.160

02.161

02.162

02.163

Top patch

02.110

02.111

02.112

02.113

02.114

02.115

02.116, for ___ mm rebate

02.117, for ___ mm rebate

02.118, for ___ mm rebate

02.119, for ___ mm rebate

02.164

02.165

02.166

02.167

Top patch + pivot

02.170

For frame fixing; 24 mm rebate.

02.171

For frame fixing; 24 mm rebate.

02.200

For sidelight in toughened glass assembly.

02.201

For sidelight in toughened glass assembly.

02.202

For wall fixing in toughened glass assembly.

02.203

For wall fixing in toughened glass assembly.

02.204

For frame fixing in toughened glass assembly.

02.205

For frame fixing in toughened glass assembly.

02.206

For frame fixing; 24 mm rebate.

02.207

For frame fixing; 24 mm rebate.

02.208, for ___ mm rebate

For frame fixing; 15–23 mm or 25–40 mm rebate.

02.209, for ___ mm rebate

For frame fixing; 15–23 mm or 25–40 mm rebate.

Overpanel patch

02.120

02.121

02.122

02.123

02.124, for ___ mm rebate

02.125, for ___ mm rebate

02.140

Patch for overpanel and sidelight.

02.141

Patch for overpanel and sidelight.

02.168

02.169

Frame top centre

02.150 (with fixing block)

For wood and steel frames; insert rebate depth, if applicable.

02.151 (with angle bracket)

For wood and steel frames.

02.152 (with wedge screw)

Left hand; for steel frames only.

02.153 (with wedge screw)

Right hand; for steel frames only.

Material/ Finish

Aluminium, anodized, dark bronze

Aluminium, anodized, silver

Aluminium, anodized, ___

Insert colour.

Aluminium, mill finish

Aluminium, powder coated, white

Similar to RAL 9016.

Aluminium, powder coated, ___

Insert colour.

Brass, polished

Brass, satin chrome plated

Accessories

Gasket 01.900, for use with fitting ___

Adapts fittings to suit 8 mm thick glass.

Product Options

Delete clause items that are not applicable.

Bottom patch:

To suit DORMA floor spring spindle or 14 mm diameter round pivot.

– For offset hung doors in toughened glass assemblies:

  • 02.100/ 02.101 – Left/ right hand; for 10 mm and 12 mm glass.

– For offset hung doors in frames with 24 mm rebate:

  • 02.102/ 02.103 – Left/ right hand; for 10 mm glass; counter-plate reduced by 15 mm to give free glass edge at side.
  • 02.104/ 02.105 – Left/ right hand; for 10 mm glass; counter-plate reduced by 15 mm to give free glass edge at side and bottom.
  • 02.160/ 02.161 – Left/ right hand; for 12 mm glass; counter-plate reduced by 15 mm to give free glass edge at side.
  • 02.162/ 02.163 – Left/ right hand; for 12 mm glass; counter-plate reduced by 15 mm to give free glass edge at side and bottom.

– For offset hung doors in frames with 15–23 mm or 25–40 mm rebate:

  • 02.106/ 02.107 – Left/ right hand; for 10 mm glass; counter-plate reduced by 15 mm to give free glass edge at side.
  • 02.108/ 02.109 – Left/ right hand; for 10 mm glass; counter-plate reduced by 15 mm to give free glass edge at side and bottom.

Top patch:

– For offset hung doors in toughened glass assemblies:

  • 02.110/ 02.111 – Left/ right hand; for 10 mm and 12 mm glass.

– For offset hung doors in frames with 24 mm rebate:

  • 02.112/ 02.113 – Left/ right hand; for 10 mm glass; counter-plate reduced by 15 mm to give free glass edge at side.
  • 02.114/ 02.115 – Left/ right hand; for 10 mm glass; counter-plate reduced by 15 mm to give free glass edge at side and top.
  • 02.164/ 02.165 – Left/ right hand; for 12 mm glass; counter-plate reduced by 15 mm to give free glass edge at side.
  • 02.166/ 02.167 – Left/ right hand; for 12 mm glass; counter-plate reduced by 15 mm to give free glass edge at side and top.

– For offset hung doors in frames with 15–23 mm or 25–40 mm rebate:

  • 02.116/ 02.117 – Left/ right hand; for 10 mm glass; counter-plate reduced by 15 mm to give free glass edge at side.
  • 02.118/ 02.119 – Left/ right hand; for 10 mm glass; counter-plate reduced by 15 mm to give free glass edge at side and top.

Top patch + pivot:

– For sidelight in toughened glass assemblies:

  • 02.200/ 02.201 – Left/ right hand; for 10 mm and 12 mm glass.

– For wall fixing in toughened glass assembly:

  • 02.202/ 02.203 – Left/ right hand; for 10 mm and 12 mm glass.

– For frame fixing in toughened glass assembly:

  • 02.204/ 02.205 – Left/ right hand; for 10 mm and 12 mm glass.

– For offset hung doors in frames with 24 mm rebate:

  • 02.170/ 02.171 – Left/ right hand; for 12 mm glass; counter-plate reduced by 15 mm to give free glass edge at side.
  • 02.206/ 02.207 – Left/ right hand; for 10 mm glass; counter-plate reduced by 15 mm to give free glass edge at side.

– For offset hung doors in frames with 15–23 mm or 25–40 mm rebate:

  • 02.208/ 02.209 – Left/ right hand; for 10 mm glass; counter-plate reduced by 15 mm to give free glass edge at side.

Overpanel patch:

20 mm diameter bushing outside; 15 mm diameter pivot.

– For offset hung doors in toughened glass assemblies:

  • 02.120/ 02.121 – Left/ right hand; for 10 mm and 12 mm glass.
  • 02.140/ 02.141 – Left/ right hand; patch for overpanel and sidelight; for 10 mm and 12 mm glass.

– For offset hung doors in frames with 24 mm rebate:

  • 02.122/ 02.123 – Left/ right hand; for 10 mm glass; counter-plate reduced by 15 mm to give free glass edge at side.
  • 02.168/ 02.169 – Left/ right hand; for 12 mm glass; counter-plate reduced by 15 mm to give free glass edge at side.

– For offset hung doors in frames with 15–23 mm or 25–40 mm rebate:

  • 02.124/ 02.125 – Left/ right hand; for 10 mm glass; counter-plate reduced by 15 mm to give free glass edge at side.

Similar products from dormakaba UK & Ireland