Verified by manufacturer 3 months ago
Industrial roller shutter
Recommended for factories, warehouses and garages.
A single-skinned galvanized steel roller shutter designed for standard industrial duty applications.
Finish | Galvanized |
Material | Steel |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Uniclass | |
CAWS | L20/610 Roller shutters/ curtains |
Standard | BS EN 13241-1, BS EN 12604 BS EN 12423, BS EN 12424. |
Opening sizesUnder standard construction dimensions up to 6000 x 6000 mm. Larger sizes by specification. Please consult Fortress SEFA for advice. | - |
Arrangement | Vertical roller shutter for face fixing. |
Performance | - |
Resistance to wind load | BSEN 12424:2000, Classification 5. |
Acoustic performance | Weighted Level Difference Dw value 22 dB. |
Shutter curtain | - |
Lath material | Interlocking galvanized steel laths, 75 mm in depth, with solid curved profile restrained laterally by end locks riveted to both ends on alternate laths. Fortress Wind lock System™ and Retention Test Certification to lath. BS EN 12453 Galvanised steel roll-formed base bar with Fortress Anti-Catch System™ designed to avoid any lifting hazard. Base bar complete with interlocking rubber seal to prevent vermin access, water ingress and unwanted air movement.Perforated curtain/ perforated lath sections within curtain providing 25% free airflow.Punched sections 152w x 35h in a brick bond or inline pattern, providing 40% free airflow. |
Finish and colourDoor curtain and guides can be supplied BS EN 12206-1 DuPont® polyester powder coated (PPC) to the Fortress Pro-Tec range of 29 BS and RAL colours. Matt PPC finishes only. All finishes are applied in-house using an electrostatic process. Under normal circumstances average film thickness of 60-80 μm (microns) is applied. Non-standard colours are available on request - this may increase lead times. Please consult Fortress SEFA for advice. | BS 00A05.BS 04E53.BS 08B29.BS 12B27.BS 18B25.BS 18E53.RAL 1015.RAL 1021.RAL 3005.RAL 3020.RAL 5003.RAL 5005.RAL 5010.RAL 5013.RAL 5015.RAL 6005.RAL 6029.RAL 7016.RAL 7021.RAL 7031.RAL 7035.RAL 7037.RAL 8016.RAL 9001.RAL 9005 (BLACK).RAL 9006 (SILVER).RAL 9007.RAL 9010 (WHITE).RAL 9910. |
Frame and guides | - |
Material | BS EN 12424 Fortress DB80 G-channel™ 3 mm Z-steel roll-formed guides with concealed fixing and wind locking channel. Fortress DB80 G-channel™ patented roll-formed guide design ensures that no sharp edges are exposed. |
FinishStandard finish is a galvanized steel curtain and guides with non-galvanized components lacquered. | Galvanized to BS EN ISO 1461. |
Operation | - |
Mode | BS EN 12453 Fortress DB75 30% duty Chain Drive System™ 415 Volt 3-phase operator with push button controls, supplied with hand chain operation for use in the event of emergency open/closure. BS EN 12604 Inertia safety brake system fitted to prevent door from dropping and closing in an unsafe manner. |
Control | BS EN 12453 Hold-to-run and dead-man close automation for applications Where there are untrained door users. Drive unit incorporates a manual release for emergency use of hand chain. . |
Accessories | Auto time return control panel.Battery backup240 Volt single-phase operation (maximum dimensions 4500 x 4500 mm). Brush seal to head.Fascia hood.Galvanized sheet steel coil casing.High security ground lock.Induction loop card.Motor hood.(BS EN 13241-1: all moving parts to be covered by casing on all Shutters under 2500 mm high). PhotocellPhotocell (light beam sensor will detect the presence of a person or object that interrupts the light beam providing a non-contact safety system). Radar sensor.Remote control receiver and transmitters.Self-checking safety edge.Self-checking safety edge (will stop and reverse the door movement immediately upon contact with an obstacle). Wicket gate.standard size 600 x 1830 mm, complete with lock, handles and safety locking system. |
Barrel | Carbon steel tube finished with one coat rust inhibitive primer. |
End plates | 6–8 mm (depending on curtain size/weight) carbon steel plates finished with one coat rust inhibitive primer or BS EN 12206-1 DuPont® polyester powder coated (PPC) finish. |
NBS BIM object standard
This BIM object has been authored to meet the requirements of the NBS BIM object standard.
Find out more about the NBS BIM object standard.
Platform | Compatible | Version |
---|---|---|
![]() | - | 1 |
![]() | - | 1 |
DB501 Fabric Speed Door
DB601 Rolling Speed Door
DBF75 Industrial Fire Roller Shutter - Fire Rated Roller shutter
DBi101 Industrial Roller Shutter
DBiA101 Insulated Acoustic Roller Shutter
DBiA101 SR3 Industrial Roller Shutter
DBiF101 Industrial Insulated Fire Roller Shutter
DBT-MG EVO3 Industrial Panel Spiral Door
Defense System Extreme Lattice
SEC600 Industrial Sectional Door