CSG 10605 Trackless Bi-Folding Gate

The CSG 10605 is a trackless bi-folding gate that does not require a track in either the ground or overhead. The gate is driven by a unique motor drive unit connected to a crank arm assembly which locks the gate in both open and closed positions. 

Unlike the CSG 10604 trackless bi-folding gate which has the folding mechanism located on the top of the gate leaf, the CSG 10605 utilizes a rack and pinion mechanism located at a lower level which leaves the top of the gate free for spikes, barbed wire, decorative ironmongery, or other features as required. 

Features and benefits:

• Manufactured to any entrance size.
• Mechanical locking with manual or automatic controls.
• Operates at low and high weather extremes.
• Certified to the loss prevention standard LPS 1175. 
• Available in any RAL colour. 
• Two drive options available, dependent on site and size requirements. 
• Two installation options: surface fix, for existing surfaces usually within a building or where it is difficult to provide submerged foundations. Or subfix where it is possible to cast new foundations. 
• The bi-folding method of gate operation requires considerably less power to operate than conventional swing gates and also has less wind effect. This combined with the 270 degree drive results in a relatively lower powered and thus safer drive.
• Leading edges of the leaves are fitted with electrical rubber safe edges, which if in contact with an obstruction will stop the operation of the gate. 
• Hand built in the UK.
• Warranty, service and maintenance available.