CSG 10604 Trackless Bi-Folding Gate

The CSG 10604 is a trackless bi-folding gate that does not require a track in either the ground or overhead to fold the leaf. A chain and sprocket mechanism located on the top of the post hung leaf is utilized to fold the leafs. The folding mechanism transfers rotation from the post hung leaf to the leaf hung leaf at a ratio of 2:1. The sinusoidal action of the drive allows the gate to operate in both a smooth yet fast action in comparison to traditional swing gates. The gate is driven by a distinctive motor drive unit connected to a crank arm assembly which locks the gate in both open and closed positions

Features and benefits:

• Manufactured to any entrance size.
• Mechanical locking with manual or automatic controls.
• Operates at low and high weather extremes.
• Opening/ closing speed four seconds – fully programmable for slower speeds.
• Operating speed from six seconds, rated for continuous operation – 100% duty cycle. 
• Available in any RAL colour. 
• Two drive options available, dependent on site and size requirements. 
• Two installation options: surface fix, for existing surfaces usually within a building or where it is difficult to provide submerged foundations. Or subfix where it is possible to cast new foundations. 
• The bi-folding method of gate operation requires considerably less power to operate than conventional swing gates and also has less wind effect. This combined with the 270 degree drive results in a relatively lower powered and thus safer drive. 
• Leading edges of the leaves are fitted with electrical rubber safe edges, which if in contact with an obstruction will stop the operation of the gate. 
• Hand built in the UK.
• Warranty, service and maintenance available.