Carlisle SureSeal EPDM Tanking Membranes

Flex-R Ltd Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

BBA approved EPDM reinforced and non-reinforced tanking membranes.

Jump to:
+44 (0)1494 448792 www.rubberbond.co.uk
Description

BBA approved EPDM (Ethylene-Propylene Diene Monomer) reinforced and non-reinforced tanking membranes, available in a range of sheet sizes, thicknesses and lengths. The membranes are UV stable to enable continuous waterproofing from below to above ground, without the need for further coatings or protection.

They can be either bonded or mechanically fixed and are suitable for use as damp-proofing or waterproofing membranes for solid concrete floors, underground structures and for internally and externally applied tanking below ground.

Features:

  • Fleeceback membrane gives a 28% increases in puncture resistance.
  • Provides an effective barrier to the transmission of moisture.
  • Restricts ingress of radon, methane and carbon dioxide.

General information

Features

Fleeceback membrane gives a 28% increases in puncture resistance

Provides an effective barrier to the transmission of moisture

Restricts ingress of radon, methane and carbon dioxide

Uniclass 2015

Pr_25_57_51_66 Polymeric membranesPrimary

CAWS

J40/297 Waterproofing/ Damp proofing membrane

Specification data - Polymeric membranes

Product Reference

Carlisle Sureseal EPDM Tanking Membranes

Thickness

1.14 mm

Non-reinforced.

1.52 mm

Non-reinforced.

2.29 mm

Non-reinforced.

2.54 mm

Reinforced Fleeceback EPDM membrane.

Width

1.52 m

3.05 m

6.10 m

Not available with Fleeceback EPDM membrane.

4.15 m

Not available with Fleeceback EPDM membrane.

9.15 m

Not available with Fleeceback EPDM membrane.

15.25 m

Not available with Fleeceback EPDM membrane.

Length

12.20 m

15.25 m

30.50 m

Not available with Fleeceback EPDM membrane.

Accessories

None

Bonding Adhesive

For adhered membrane applications.

HP-250 Primer

For cleaning jointing seams.

Lap Sealant

For lap joints at details.

Pressure-Sensitive SecurTAPE

For splicing joints.

RUSS strip

For securing the membrane within overlap joints on mechanically fastened membrane applications.

Splice Cleaner

For cleaning lap joints at details.

Splicing Cement

For bonding laps between EPDM sheets.

Termination Bar

For securing the membrane within overlap joints on mechanically fixed membrane applications.

Water Cut-Off Mastic

Used in conjunction with Termination bars or RUSS strips on mechanically fixed membrane applications.

Standard product features

Colour:

Grey/ black.

Elongation (to BS 903-A2):

  • Control: 450%.
  • Heat aged: 280%.

Tensile strength:

  • Control: 11.3 MPa.
  • Heat aged: 11.6 MPa.

Water vapour permeability (to BS 3177):

0.3 g/m²/day.

Product Options

Thickness:

The Fleeceback membrane incorporates a non woven polyester fleece backing and has FAT (Factory Applied Tape) technology for improved seam strength and installation speed.

Third party certifications
Similar products from Flex-R Ltd