NBS Source
List your products
CaberDek

CaberDek

Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

  • QA Certificate

    QA Certificate

    Certificate type

Norbord Europe Ltd

A P5 particle board flooring product with a waterproof, peel-off film. For floor laying before the building is watertight.

Jump to:
+44 (0)1786 812921 www.norbord.co.uk
Description

A high-density particleboard, incorporating a waterproof, slip-resistant film, designed specifically for flooring applications, with a removable protective film to protect the board from on site damage.

General information
Size

600 x 2400 mm

600 x 2440 mm

Uniclass 2015
Pr_25_71_97_60 ParticleboardsPrimary
CAWS

K11/125 Battened particleboard floating floor

K11/225 Particleboard floating floor

K11/25 Particleboard floating floor

K11/30 Particleboard flooring

K11/325 Particleboard flooring

Specification data - Particleboards
Product Reference

CaberDek

Thickness

18 mm

22 mm

Size

600 x 2400 mm

600 x 2440 mm

Accessories

CaberFix D3

CaberFix D4

CaberFix Joint & Joist

CaberFix Pro Kit

CaberFix Tape

CaberFix X-Treme Tape

Standard product features

Technical properties:

  • Standard: To BS EN 312, Type P5.
  • Panel weight: 12 kg/m² (18 mm), 15 kg/m² (22 mm).
  • Density: 660 ±30 kg/m³.
  • Thermal conductivity: 0.14 W/m·K.
  • Reaction to fire (BS EN 13501-1): Class D.
  • Edge profile: Tongued and grooved. Gluing T&G edges is recommended. It improves joint strength and accommodates a degree of joist variation. All joints must be glued with an adhesive such as moisture resistant PVA type to BS EN 204, Class D3. Otherwise, joist movement or variation may lead to movement and ‘creaks’.

Perimeter expansion gap:

  • It is important to leave an expansion gap of 2 mm per metre run of board between the edge of the floor and the perimeter wall or any solid abutment (minimum gap 10 mm).
  • For larger areas it is necessary to incorporate intermediate expansion gaps to provide the necessary allowance for possible movements, particularly in corridor applications.
  • Attention must be paid to maintaining expansion gaps at all times during construction.

Expansion and contraction provision:

  • An expansion provision should be allowed of 2 mm per metre plus 1 mm for every metre above 12 m of the width or breadth of the area.

Soft and resilient floor coverings:

  • When thin or shiny floor surface materials are laid over CaberFloor these materials may allow board joints to show through, particularly after trafficking. Prior to laying such materials, the CaberFloor joints should be checked for levelness. It is permissible to sand off any raised areas not exceeding 1 mm. For raised areas greater than 1 mm, additional levelling materials are required. Thin plain coloured carpets or vinyls or those with a high sheen tend to show small irregularities to a greater degree.
  • For thin vinyls and tiling, it is recommended that a plywood overlay (4 mm) is fixed in position, staggering joints so as not to coincide with CaberFloor joints. The plywood should be fixed every 100 mm using appropriate nails or screws around perimeter and 150 mm apart elsewhere, ensuring they do not protrude above the surface. Adhesive manufacturer advice should be followed for priming of new surfaces. Usually, this involves a coat of dilute PVA emulsion, e.g. Uni-bond.

Ceramic tiling

  • Tiling onto CaberFloor should be undertaken only in joisted or fixed floor constructions.
  • Noggins should be used between the joists at 300 mm centres and the surface provided for tiling should be 15 mm exterior grade plywood screwed to joists and noggins at 300 mm centres. Existing boards can therefore be overlaid with 15 mm exterior grade plywood to provide the necessary rigidity for a tiled surface.
  • Length of fixings should be 2.5 times overall board thickness. A tile adhesive is the recommended bond material - cement/ sand mortars are not recommended.

Product Options

Thickness

  • Joist centres up to 450 mm: 18 mm board.
  • Joist centres up to 600 mm: 22 mm board.

Accessories:

Various combinations of adhesives can be used for flooring BBA approval.

- CaberDek fixing:

CaberDek can be fixed using either a PU adhesive with tape, or using a foaming adhesive:

  • CaberFix Pro Kit; containing CaberFix Joint & Joist, CaberFix T&G D3, CaberFix Tape. Two kits are enough to fit one full pack of CaberDek (approx. 100 m²).
  • CaberFix D4 can be used to seal board edges, glue the board to the joist and glue the T&G.

Third party certifications
  • 02/3904
  • FSC: Certified
  • CE Mark
Similar products from Norbord Europe Ltd