Verified by manufacturer 8 days ago
EPD
Certificate type
CCPI System
Certificate type
BBA Agrément Certificate
Certificate type
Self-adhesive elastomeric bitumen air and vapour control layer (AVCL), with an aluminium foil facing.
The product is used as an air and vapour control layer in Bauder Single Ply and Cold Applied Liquid systems for installation over certain existing roof systems and all common deck substrates, including profiled metal decks, following the application of Bauder Activator-Primer. It is also used as the carrier membrane over insulation and timber decks with Bauder Cold Applied Liquid systems. It is not intended for direct application to concrete decks or as temporary waterproofing.
A self-adhesive elastomeric reinforced bitumen air and vapour control layer, featuring an aluminium foil facing for vapour impermeability. If this product is being used in a fully bonded system then a Bauder Self Adhesive Primer will be required.
Only to be used as part of a full Bauder Single Ply or Cold Applied Liquid Waterproofing System.
Color | Silver |
Finish | Foil Guidance for specification option: Top: Aluminium foil, Bottom: Peel off release film covering self-adhesive bitumen. Manufacturer guidanceTop: Aluminium foil |
Material | Bitumen |
Length | 32000 mm |
Width | 1250 mm |
Height | 0.6 mm |
Warranty description | Manufacturer guidanceA comprehensive range of guarantee options are available. Please contact your local Bauder Area Technical Manager for more information. |
Uniclass | |
CAWS | J42/110 Warm deck roof covering J42/10 Warm deck roof covering P10/310 Air and vapour control layer J42/395 Air and vapour control layer P10/60 Air and vapour control layer |
Material | |
Bitumen modification | Elastomeric. |
Thickness (minimum) | 0.6 mm. |
Weight (minimum) | 0.6 kg/m². |
Surface finish | |
Top | Aluminium foil. |
Underside | Peel off release film covering self-adhesive bitumen. |
Colour | Silver. |
Third-party certification | BRE Green Guide A+ to B rating (depending on deck type). |
Reinforcement | 50 g/m²– aluminium/ polyester combination. |
TensileStrength | >950/50 N/mm (length). >750/50 N/mm (diagonal). |
Water vapour transmission | ≥1500. |
Reaction to fire | Class E. |
Country of product manufacture | Germany |
Material | Bitumen |
Embodied carbonA1-A3 (production stage) as defined in BS EN 15804 | 0.05 kg CO₂ eq/m² Manufacturer guidancePlease refer to EPD on the Bauder website. EPD data can vary, please ensure that the scope and context of the EPD data is considered when comparing EPD’s for different products |
EPD
Environmental Product Declaration - RBM
CCPI System
Bauder LiquiDEK Roof System CCPI
CCPI System
Bauder LiquiTEC Balcony Walkway System CCPI
CCPI System
Bauder LiquiTOP Roof System CCPI
CCPI System
Bauder Thermofol CCPI
CCPI System
Bauder Thermoplan CCPI
BBA Agrément Certificate
Certificate: Bauder LiquiTOP 3COAT System 20/5789
BBA Agrément Certificate
Certificate: Bauder LiquiTOP System 20/5789
BBA Agrément Certificate
Certificate: LiquiTEC Balcony Systems 14/5152
BBA Agrément Certificate
Certificate: LiquiTEC Roof Systems 14/5152
BBA Agrément Certificate
Certificate: Thermofol Membranes 06/4354
BBA Agrément Certificate
Certification: Thermoplan Membranes 04/4120
Bauder AP1 Access Sheet
Bauder EGV 35 TF underlayer
Bauder EVA 35 Air & Vapour Control Layer
Bauder K5K Capping Sheet
Bauder Super AL-E Torch-On Air & Vapour Control Layer
BauderFLEX G4E underlayer
BauderFLEX K4E Torch-On Capping Sheet
BauderKARAT Torch-On Capping Sheet
BauderPLANT E 42 Access Protection Root Barrier Layer
BauderPLANT E 42 torch-on capping sheet