Bauder Total Green Roof System Reinforced Bitumen Membrane Warm Roof Covering System Self-Adhered (with Torch-On Capping Sheet)

As 'Horizontal work'.

KSD FBS.

Guidance for specification option:

Robust, self-adhesive elastomeric bitumen air and vapour control layer (AVCL), with a mica finished upper surface to allow easy bonding of insulation using appropriate Bauder Insulation Adhesive. One side lap features an 80 mm wide glass fleece along the underside, and a 100 mm strip of aluminium foil above. The other side lap has a thermofusible film on the top surface. This arrangement ensures that laps are heat sealed using hot air or gas torch as appropriate to extrude a bitumen bead, thus ensuring waterproofing integrity.

• Width: 1.08 m.
• Length: 10 m.
• Thickness: 2.5 mm.
• Weight: 2.5 kg/m².
• Reinforcement: Polyester coated aluminium foil and 200 g/m² glass fleece.
• Tensile strength: Length and Diagonal ≥ 1000 N/50mm.
• Cold bending test: -25°C.
• Elongation at break: Length and Diagonal ≥ 2%.

Therm DS 1 DUO.

Guidance for specification option:

Self-adhesive elastomeric bitumen air and vapour control layer with patented “DUO” lap technology to ensure thorough sealing of lap joints, even in lower temperatures. The product also features thermally activated bitumen stripes on its top surface to provide the bonding compound for the insulation boards. Allows for cleaner, safer and faster installation than traditional torch applied membranes.

• Width: 1.08 m.
• Length: 7.5 m.
• Thickness: 3.5 mm.
• Weight: 4.5 kg/m².
• Reinforcement: Polyester coated aluminium foil and 60 g/m² glass fleece.
• Tensile strength: Length ≥400 N/50mm and Diagonal ≥ 300 N/50mm.
• Cold bending test: -25°C.
• Elongation at break: Length and Diagonal ≥ 2%.

Self-adhesive.

BauderGLAS Flatboard.

Guidance for specification option:

Insert required thickness.

Can only be used with PU Insulation Adhesive – Tin (with ‘water-overmist’) or PU Insulation Adhesive – Twin cartridge.

Cellular glass insulation suitable for projects that require a high level of compressive strength and/ or to be non-combustible.

• Type: Cellular glass flatboard insulation board.
• Facing: Glass tissue or none faced (depending upon system).
• Density: 100 kg/m³.
• Board size: Contact manufacturer for options.
• Thickness (Flatboard): 50 mm, 60 mm, 70 mm, 80 mm, 90 mm, 100 mm, 110 mm, 120 mm, 130 mm, 140 mm, 150 mm, 170 mm, 180 mm (also available in Tapered).
• Thermal conductivity: 0.036 W/m·K (may vary dependent on thickness specified).
• Compressive strength: 0.5 N/mm².

BauderGLAS Tapered.

Guidance for specification option:

Insert required thickness.

Can only be used with PU Insulation Adhesive – Tin (with ‘water-overmist’) or PU Insulation Adhesive – Twin cartridge.

Cellular glass insulation suitable for projects that require a high level of compressive strength and/ or to be non-combustible.

• Type: Cellular glass tapered insulation board.
• Facing: Glass tissue or none faced (depending upon system).
• Density: 100 kg/m³.
• Board size: Contact manufacturer for options.
• Thickness (Flatboard): 50 mm, 60 mm, 70 mm, 80 mm, 90 mm, 100 mm, 110 mm, 120 mm, 130 mm, 140 mm, 150 mm, 170 mm, 180 mm.
• Thermal conductivity: 0.036 W/m·K (may vary dependent on thickness specified).
• Compressive strength: 0.5 N/mm².

BauderROCK Flatboard.

Guidance for specification option:

Insert required thickness.

Can only be used with PU Insulation Adhesive – Tin (with ‘water-overmist’) or PU Insulation Adhesive – Twin cartridge or mechanically fixed.

Mineral fibre insulation suitable for projects that require a high level of sound reduction and/ or to be non-combustible, and has a zero GWP and ODP rating.

• Type: Dual density mineral wool flatboard insulation board.
• Facing: Top: 300 g/m² glass fibre fleece; Bottom: Unfaced.
• Density: 160 kg/m³.
• Board size: 1200 x 1000 mm.
• Board thickness (Flatboard): 60 mm, 85 mm, 105 mm, 115 mm, 150 mm, 170 mm, 185 mm (also available in Tapered).
• Thermal conductivity: 0.039 W/m·K (may vary dependent on thickness specified).
• Compressive strength: >0.12 N/mm² (minimum 0.08 N/mm²).

BauderROCK Tapered.

Guidance for specification option:

Insert required thickness.

Can only be used with PU Insulation Adhesive – Tin (with ‘water-overmist’) or PU Insulation Adhesive – Twin cartridge or mechanically fixed.

Mineral fibre insulation suitable for projects that require a high level of sound reduction and/ or to be non-combustible, and has a zero GWP and ODP rating.

• Type: Dual density mineral wool tapered insulation board.
• Facing: Top: 300 g/m² glass fibre fleece; Bottom: Unfaced.
• Density: 160 kg/m³.
• Board size: 1200 x 1000 mm.
• Board thickness (Flatboard): 60 mm, 85 mm, 105 mm, 115 mm, 150 mm, 170 mm, 185 mm.
• Thermal conductivity: 0.039 W/m·K (may vary dependent on thickness specified).
• Compressive strength: >0.12 N/mm² (minimum 0.08 N/mm²).

BauderVIP TE 60 mm Flatboard.

Guidance for specification option:

• Type: Vacuum insulation panel with pyrogenic silica vacuum core, 40 mm.
• Facing: Top: High density PIR, 17 mm; Bottom: Rubber granulate, 3 mm.
• Density: 13 kg/m².
• Standard board sizes: 1000 x 1000 mm and 1000 x 500 mm.
• Standard board thickness: 60 mm.
• Thermal conductivity: 0.009 W/m·K.
• Compressive strength: >0.12 N/mm².

BaduerVIP TE 80 mm Flatboard.

Guidance for specification option:

• Type: Vacuum insulation panel with pyrogenic silica vacuum core, 60 mm.
• Facing: Top: High density PIR, 17 mm; Bottom: Rubber granulate, 3 mm.
• Density: 17 kg/m².
• Board sizes: 1000 x 1000 mm, 1000 x 500 mm.
• Board thickness: 80 mm.
• Thermal Conductivity: 0.009 W/m·K.
• Compressive strength: >0.12 N/mm².

PIR FA G16 foil-faced tapered insulation.

Guidance for specification option:

Insert required thickness.

• Type: Rigid closed-cell polyisocyanurate (PIR) roofboard: To BS EN 13165.
• Facing: Black aluminium foil to both faces.
• Density: >30 kg/m³.
• Standard board size: 1200 x 1200 mm.
• Board thickness: Contact manufacturer for options.
• Thermal conductivity: 0.022 W/m·K (may vary dependent on thickness specified).
• Compressive strength: >0.12 N/mm².
• PIR index: >250 (extremely high dimensional stability).

PIR FA-TE Flatboard.

Guidance for specification option:

Insert required thickness.

• Type: Rigid closed-cell polyisocyanurate (PIR) roofboard: To BS EN 13165.
• Facing: Aluminium foil to both faces.
• Density: >30 kg/m³.
• Standard board size: 1200 x 600 mm.
• Board thickness: 30 mm, 40 mm, 50 mm, 60 mm, 80 mm, 100 mm, 120 mm, 140 mm, 160 mm.
• Thermal conductivity: 0.022 W/m·K (may vary dependent on thickness specified).
• Compressive strength: >0.12 N/mm².
• PIR index: >250 (extremely high dimensional stability).

Activator-Primer (Canister) APR01 – Black.

PU Insulation Adhesive – Tin.

Guidance for specification option:

Not for foil to foil applications (e.g. FA-TE to FA-TE).

PU Insulation Adhesive – Twin cartridge.

BauderTEC KSA DUO.

Guidance for specification option:

A technically advanced self-adhesive SBS elastomeric bitumen underlayer with “DUO” lap technology to ensure thorough sealing of lap joints, even in lower temperatures. The product features a glass lattice reinforcement for strength and stability. The product benefits from cleaner, safer and faster installation than traditional torch-applied membranes.

• Width: 1 m.
• Length: 7.5 m.
• Thickness: 3 mm.
• Weight: 3.5 kg/m².
• Surface: Top: Foil; Bottom: Peel off release film covering self-adhesive bitumen.
• Reinforcement: 200 g/m² glass lattice.
• Cold bending test: Top -25°C; Bottom -30°C.
• Softening point: >100°C.
• Tensile strength: Length >1000 N/50mm; transverse >1000 N/50mm.
• Elongation at break: Length >2%; transverse >2%.

Self-adhered.

PLANT E.

Guidance for specification option:

A high quality, heavy duty, torch-applied, elastomeric bitumen capping sheet. The product features chemically treated bitumen to deliver superior root resistance which has been tested and approved by the FLL. The membrane is reinforced with 250 g/m² spunbond polyester fleece to allow the finished product to cope with structural movement without fracture. Expandable graphite fire retardant is also incorporated to reduce spread of flame.

• Width: 1 m.
• Length: 5 m.
• Thickness: 5.2 mm.
• Weight: 6 kg/m².
• Surface: Top: Green slate mineral chippings; Bottom: Thermofusible polyethylene.
• Reinforcement: 250 g/m² recycled spunbond polyester.
• Cold bending test: -36°C.
• Softening point: >120°C.
• Tensile strength: Length >1000 N/50 mm; transverse >1000 N/50mm.
• Elongation at break: Length >45%; transverse >45%.

Torch applied.

Not required.

Bauder GRP Trim.

Guidance for specification option:

GRP roof edge Trim for use with Bauder bituminous roof systems. Available colours of either grey or black and a choice of profiles to suit the requirements of most projects.

Bauder Aluminium Termination Bar.

Guidance for specification option:

Natural finish aluminium alternative to a lead counterflashing for use at upstand details to give protection to the top edge of the waterproofing. It should be restricted to use on upstands where a chase cannot be cut into the wall.

Bauder GRP Termination Bar.

Guidance for specification option:

Black glass reinforced plastic (GRP) alternative to a lead counterflashing for use at upstand details to give protection to the top edge of the waterproofing. It should be restricted to use on upstands where a chase cannot be cut into the wall.

Not required.

Bauder LiquiFIBRE Detailing Kit.

Guidance for specification option:

Fast curing waterproofing resin containing fibre reinforcement that can be used for detailing awkward shapes or inaccessible areas where using LiquiDETAIL is impractical. PMMA-based resin that requires a catalyst and is solvent, isocyanate and halogen free.

Bauder LiquiDETAIL.

Guidance for specification option:

Cold liquid applied fast curing waterproofing resin that can be used on upstands and details. PMMA-based resin that requires the addition of catalyst to trigger curing and is solvent, isocyanate and halogen free.

Required.

Guidance for specification option:

Insert requirements.

Not required.

Required.

Guidance for specification option:

Insert requirements.

Not required.

Required.

Guidance for specification option:

Insert requirements.

Not required.

Not required.

Landscaping options.

Guidance for specification option:

Consult manufacturer for information.

Not required.

Bauder lightning conductors.

Guidance for specification option:

Lightning conductor clips are a specially designed secure clip that allows for movement.

• Bauder Lightning conductor - Type 4: Polyvinyl chloride (PVC) coated or bare conductor.

Bauder insulated rainwater outlets.

Guidance for specification option:

For maintaining thermal continuity at drainage points. Suitable for warm, cold and inverted roof construction, the high thermal value of the rigid foam body prevents condensation from forming on the underside of the outlet.

Designed for use when connecting to conventional drainage systems, with excellent flow rate performance and is suitable for both new build and refurbishment projects. Outlets are included in the Bauder waterproofing system guarantee as they are integrated components.

Flow rate figures (where applicable) are based on BS EN 12056:3:2000, typically taken using a 35 mm header of water including leaf grille:

• Bauder Bitumen Compact Vertical Outlet DN100: Insulated internal outlet, 6.1 L/s.
• Bauder Bitumen Vertical Outlet DN70: Insulated internal outlet, 7.1 L/s.
• Bauder Bitumen Vertical Outlet DN150: Insulated internal outlet, 7.2 L/s.
• Bauder Bitumen Warm Roof Refurb Outlet DN63: Insulated internal outlet, 6.1 L/s.
• Bauder Bitumen Warm Roof Refurb Outlet DN90: Insulated internal outlet, 5.7 L/s.
• Bauder Bitumen Refurb Outlet DN95 – Un-insulated straight drop outlet, designed to ensure the maximum flow rate of the existing downpipe is not exceeded.
• Bauder Bitumen Refurb Outlet DN125 – Un-insulated straight drop outlet, designed to ensure the maximum flow rate of the existing downpipe is not exceeded.
• Bauder Insulated Parapet Outlet DN100 including pre-assembled pipe and dome grate: 0.6 L/s connected to external pipework; 0.7 L/s connected to external hopper.
• Bauder Bitumen Blue Roof Vertical Outlet DN70: Insulated internal outlet. To be used in conjunction with Bauder Bitumen Blue Roof Flow Restrictor only. Bauder Bitumen Blue Roof Vertical Outlet DN70 (when used with BauderBLUE ST-B Adjustable Blue Roof Flow Restrictor – Bitumen) flow rates are project specific and obtained via Bauder Technical.
• BauderBLUE ST-B Adjustable Blue Roof Flow Restrictor – Bitumen. The BauderBLUE ST-B Adjustable Blue Roof Flow Restrictor – Bitumen is designed to be used in conjunction with a standard Bauder Bitumen Blue Roof Vertical Outlet DN70. The Bauder Blue Roof Bitumen Flow Restrictor is comprised of four parts; Baseplate, overflow pipe, Baseplate inner and Baseplate outer seal. The polyamide Baseplate fits within the 70 mm vertical outlet, with the EPDM outer seal creating a watertight fit. The PE-HD Overflow slots into the central hole of the Baseplate with an inner EPDM seal preventing any leaks. BauderBLUE ST-B Adjustable Blue Roof Flow Restrictor – Bitumen must be set to the requirement of the particular roof. Bauder must be consulted to carry out this bespoke design.
• Bauder Parapet Emergency Overflow Stainless Steel DN70: Emergency overflow/ tell-tale.

Bauder rooflights/ glazing/ ventilation.

Guidance for specification option:

All these glazing products are fully compatible with the roof waterproofing systems. Consult manufacturer for details and insert requirements.

• BauderDOME Rooflight.
• Bauder Euroglaze Rooflight.
• Bauder Special Modular Rooflight.
• Bauder Continuous Rooflight.
• Bauder Walk-on Rooflight.
• Bauder Direct Glazing.
• Bauder AOV.
• Bauder Modular Link Glazing.
• Bauder Structural Rooflight.
• Bauder Fire Rated Rooflight.