Bauder Total Green Roof System Reinforced Bitumen Membrane Inverted Roof Covering System Self-Adhered (with Torch-On Capping Sheet)

Primer:

Contact Bauder to confirm substrate suitability if required.

- Activator-Primer (Canister) APR01 - Black:

Synthetic rubber resin-based primer, developed to provide the necessary preparation of substrates prior to the installation of self-adhesive and torch-applied membranes. The spray application offers improved film thickness speed of application (by up to 50% over roller applied products) and quick drying in a matter of minutes.

• Coverage: Approx. 96 g/m² (300 mm-wide spray one coat, 192 g/m² two coats). Two coats may be required for very porous substrates.

• Application temperature: +5 to +30°C.

• Drying time (at 10°C): 5-10 minutes.

• Colour: Black.

• Recoat time if left exposed: Four hours.

• Suitable substrates: Oriented strand board (OSB); plywood; timber; concrete; lightweight concrete or cementitious materials; metal; Bauder self-adhesive underlayers; existing asphalt and bitumen membranes; polyisocyanurate (PIR) insulation.

• Non-suitable substrates: Mica finished surfaces (e.g. KSD Mica); Laminated paper-foil faced insulation; expanded polystyrene (EPS) or extruded polystyrene (XPS) insulations; BauderROCK or mineral wool insulation; BauderGLAS or cellular glass insulation; copper; thermoplastic waterproofing membranes.

Underlayer:

- BauderTEC KSA DUO:

A technically advanced self-adhesive SBS elastomeric bitumen underlayer with “DUO” lap technology to ensure thorough sealing of lap joints, even in lower temperatures. The product features a glass lattice reinforcement for strength and stability.The product benefits from cleaner, safer and faster installation than traditional torch-applied membranes.

• Width: 1 m.

• Length: 7.5 m.

• Thickness: 3 mm.

• Weight: 3.5 kg/m².

• Surface: Top: Foil; Bottom: Peel off release film covering self-adhesive bitumen.

• Reinforcement: 200 g/m² glass lattice.

• Cold bending test: Top -25°C; Bottom -30°C.

• Softening point: >100°C.

• Tensile strength: Length >1000 N/50 mm; transverse >1000 N/50 mm.

• Elongation at break: Length >2%; transverse >2%.

Capping sheet:

- Plant E:

A high quality, heavy duty, torch-applied, elastomeric bitumen capping sheet. The product features chemically treated bitumen to deliver superior root resistance which has been tested and approved by the FLL. The membrane is reinforced with 250 g/m² spunbond polyester fleece to allow the finished product to cope with structural movement without fracture. Expandable graphite fire retardant is also incorporated to reduce spread of flame.

• Width: 1 m.

• Length: 5 m.

• Thickness: 5.2 mm.

• Weight: 6 kg/m².

• Surface: Top: Green slate mineral chippings; Bottom: Thermofusible polyethylene.

• Reinforcement: 250 g/m² recycled spunbond polyester.

• Cold bending test: -36°C.

• Softening point: >120°C.

• Tensile strength: Length >1000 N/50 mm; transverse >1000 N/50 mm.

• Elongation at break: Length >45%; transverse >45%.

Insulation:

- Type:

JFRI (200) HP Inverted Insulation Flatboard:

A range of flat high performance rigid expanded polystyrene insulation boards designed specifically for inverted roof applications.

• Type: High performance rigid expanded polystyrene insulation boards.

• Facing: Unfaced.

• Colour: Grey.

• Density: >30 kg/m³.

• Standard board size: 1215 x 1215 mm (including 15 mm rebate).

• Board thickness: 50 mm, 60 mm, 100 mm, 120 mm, 130 mm, 135 mm, 140 mm, 150 mm, 160 mm, 165 mm, 175 mm, 180 mm, 185 mm, 195 mm, 200 mm, 205 mm, 210 mm, 220 mm, 225 mm, 230 mm, 235 mm, 240 mm.

• Thermal conductivity: Declared 0.031 W/m·K; design 0.035 W/m·K (may vary dependent on thickness specified).

• Compressive strength: >0.20 N/mm² with 10% nominal compression.

• Ozone depletion potential (ODP): Zero.

• Global warming potential (GWP): <5 kg CO2 Eq./Kg.

• Recyclability: 100%.

JFRI (200) Inverted Insulation Tapered:

A range of tapered high performance rigid expanded polystyrene insulation boards designed specifically for inverted roof applications.

• Type: High performance rigid expanded polystyrene insulation boards.

• Facing: Unfaced.

• Colour: White.

• Density: >30 kg/m³.

• Standard board size: 1200 x 600 mm.

• Board thickness: Contact Bauder for options.

• Thermal conductivity: Declared 0.033 W/m·K; design 0.038 W/m·K (may vary dependent on thickness specified).

• Compressive strength: >0.20 N/mm² with 10% nominal compression.

• Ozone depletion potential (ODP): Zero.

• Global warming potential (GWP): <5 kg CO2 Eq./Kg.

• Recyclability: 100%.

JFRI (300) Inverted Insulation Flatboard:

A range of flat high performance rigid expanded polystyrene insulation boards designed specifically for inverted roof applications.

• Type: High performance rigid expanded polystyrene insulation boards.

• Facing: Unfaced.

• Colour: White.

• Density: >40 kg/m³.

• Standard board size: 1215 x 1215 mm (including 15 mm rebate).

• Board thickness: 50 mm, 60 mm, 70 mm, 80 mm, 90 mm, 100 mm, 120 mm, 130 mm, 135 mm, 140 mm, 150 mm, 160 mm, 180 mm, 185 mm, 195 mm, 200 mm, 205 mm, 210 mm, 220 mm, 225 mm, 230 mm, 235 mm, 240 mm.

• Thermal conductivity: Declared 0.033 W/m·K; design 0.038 W/m·K (may vary dependent on thickness specified).

• Compressive strength: >0.30 N/mm² with 10% nominal compression.

• Ozone depletion potential (ODP): Zero.

• Global warming potential (GWP): <5 kg CO2 Eq./Kg.

• Recyclability: 100%.

JFRI (300) Inverted Insulation Tapered:

A range of tapered high performance rigid expanded polystyrene insulation boards designed specifically for inverted roof applications.

• Type: High performance rigid expanded polystyrene insulation boards.

• Facing: Unfaced.

• Colour: White.

• Density: >40 kg/m³.

• Standard board size: 1200 x 600 mm.

• Board thickness: Contact Bauder for options.

• Thermal conductivity: Declared 0.033 W/m·K; design 0.038 W/m·K (may vary dependent on thickness specified).

• Compressive strength: >0.30 N/mm² with 10% nominal compression.

• Ozone depletion potential (ODP): Zero.

• Global warming potential (GWP): <5 kg CO2 Eq./Kg.

• Recyclability: 100%.

Bauder XPS GG (300) Inverted Insulation Flatboard:

A range of flat high performance rigid extruded polystyrene insulation boards.

• Type: High performance rigid extruded polystyrene insulation boards.

• Facing: Smooth self-finished.

• Density: 30 kg/m³.

• Standard board size: 1250 x 600 mm.

• Board thickness: 30 mm, 40 mm, 50 mm, 60 mm, 70 mm, 80 mm, 100 mm, 120 mm, 140 mm.

• Thermal conductivity: 30 mm: 0.034 W/m·K; 40–50 mm: 0.035 W/m·K. >50 mm: 0.036 W/m·K.

• Compressive strength: 0.30 N/mm².

• Ozone depletion potential (ODP): Zero.

• Global warming potential (GWP): <1 kg CO2 Eq./Kg.

Bauder XPS GG (500) Inverted Insulation Flatboard:

A range of flat high performance rigid extruded polystyrene insulation boards.

• Type: High performance rigid extruded polystyrene insulation boards.

• Facing: Smooth self-finished.

• Density: 35 kg/m³.

• Standard board size: 1250 x 600 mm.

• Board thickness: 40 mm, 50 mm, 60 mm, 70 mm, 80 mm, 100 mm, 120 mm, 140 mm.

• Thermal conductivity: 40–60 mm: 0.034 W/m·K; >60 mm: 0.036 W/m·K.

• Compressive strength: 0.50 N/mm².

• Ozone depletion potential (ODP): Zero.

• Global warming potential (GWP): <1 kg CO2 Eq./Kg.

Bauder XPS GG (700) Inverted Insulation Flatboard:

A range of flat high performance rigid extruded polystyrene insulation boards.

• Type: High performance rigid extruded polystyrene insulation boards.

• Facing: Smooth self-finished.

• Density: 45 kg/m³.

• Standard board size: 1250 x 600 mm.

• Board thickness: 40 mm, 50 mm, 60 mm, 70 mm, 80 mm, 100 mm, 120 mm, 140 mm.

• Thermal conductivity: 40–60 mm: 0.034 W/m·K; >60 mm: 0.036 W/m·K.

• Compressive strength: 0.70 N/mm².

• Ozone depletion potential (ODP): Zero.

• Global warming potential (GWP): <1 kg CO2 Eq./Kg.

Water flow reducing layer (Vapour permeable membrane):

- Bauder JFRI WFRL:

Supplied as part of the JFRI Inverted Insulation system to minimize water flow through and below the insulation.

• Width: 3 m.

• Length: 100 m.

• Thickness: 0.45 mm.

• Weight: 0.1 kg/m².

• Colour: Black.

- Bauder XPS WFRL:

Supplied as part of the XPS GG Inverted Insulation system to minimize water flow through and below the insulation.

• Width: 3 m.

• Length: 100 m.

• Thickness: 0.17 mm.

• Weight: 0.06 kg/m².

• Colour: White.

Accessories:

- Bauder GRP Trim:

GRP roof edge Trim for use with Bauder bituminous roof systems. Available colours of either grey or black and a choice of profiles to suit the requirements of most projects.

- Bauder Aluminium Termination Bar:

Natural finish aluminium alternative to a lead counterflashing for use at upstand details to give protection to the top edge of the waterproofing. It should be restricted to use on upstands where a chase cannot be cut into the wall.

- Bauder GRP Termination Bar:

Black glass reinforced plastic (GRP) alternative to a lead counterflashing for use at upstand details to give protection to the top edge of the waterproofing. It should be restricted to use on upstands where a chase cannot be cut into the wall.

- Bauder lightning conductors:

Lightning conductor clips are a specially designed secure clip that allows for movement.

• Bauder Lightning conductor - Type 4: Polyvinyl chloride (PVC) coated or bare conductor.

- Bauder insulated rainwater outlets:

For maintaining thermal continuity at drainage points. Suitable for warm, cold and inverted roof construction, the high thermal value of the rigid foam body prevents condensation from forming on the underside of the outlet.

Designed for use when connecting to conventional drainage systems, with excellent flow rate performance and is suitable for both new build and refurbishment projects. Outlets are included in the Bauder waterproofing system guarantee as they are integrated components.

Flow rate figures (where applicable) are based on BS EN 12056:3:2000, typically taken using a 35 mm header of water including leaf grille:

• Bauder Bitumen Compact Vertical Outlet DN100: Insulated internal outlet, 6.1 L/s.

• Bauder Bitumen Vertical Outlet DN70: Insulated internal outlet, 7.1 L/s.

• Bauder Bitumen Vertical Outlet DN150: Insulated internal outlet, 7.2 L/s.

• Bauder Insulated Parapet Outlet DN100 including pre-assembled pipe and dome grate: 0.6 L/s connected to external pipework; 0.7 L/s connected to external hopper.

• Bauder Parapet Emergency Overflow Stainless Steel DN70: Emergency overflow/ tell-tale.

- Bauder LiquiFIBRE Detailing Kit:

Fast curing waterproofing resin containing fibre reinforcement that can be used for detailing awkward shapes or inaccessible areas where using LiquiDETAIL is impractical. PMMA-based resin that requires a catalyst and is solvent, isocyanate and halogen free.

- Bauder LiquiDETAIL:

Cold liquid applied fast curing waterproofing resin that can be used on upstands and details. PMMA-based resin that requires the addition of catalyst to trigger curing and is solvent, isocyanate and halogen free.

- Bauder rooflights/ glazing/ ventilation:

All these glazing products are fully compatible with the roof waterproofing systems. Consult Bauder for details and insert requirements.

• BauderDOME Rooflight.

• Bauder Euroglaze Rooflight.

• Bauder Special Modular Rooflight.

• Bauder Continuous Rooflight.

• Bauder Walk-on Rooflight.

• Bauder Direct Glazing.

• Bauder AOV.

• Bauder Modular Link Glazing.

• Bauder Structural Rooflight.

• Bauder Fire Rated Rooflight.

- Hard landscaping/ Ballast options:

Consult Bauder for information.