BBA Agrément Certificate
Certificate type
Single ply Thermofol polyvinyl chloride (PVC) cold roof system, incorporating Thermofol single ply membrane for adhesive bonding.
Single ply Thermofol polyvinyl chloride (PVC) cold roof system, incorporating Thermofol single ply membrane for adhesive bonding.
Bauder Single Ply Thermofol PVC Roof system is suitable for a variety of applications on both new build and refurbishment projects and can be used in warm, cold and inverted roof scenarios. Can also be used for extensive green roof situations.
See BBA certification 06/4354. Thermofol can meet current UK Building Regulations Part B for external fire protection.
Key features:
Benefits:
Please note that profile metal decks will require a plywood/ Oriented strand board (OSB) overlay for cold roofs. Consult manufacturer for details.
Uniclass 2015 | |
CAWS | J42/130 Cold deck roof covering |
Product Reference | Bauder Single Ply Thermofol Cold Roof Membrane System Adhered |
Waterproof membrane | Thermofol U1.2 mm, 1.5 mm, 1.8 mm, or 2 mm polyester reinforced, for all applications except for adhering to existing bitumen. Thermofol U15 FB1.5 mm, fleece backed polyester reinforced, for all applications. |
Attachment | Fleece Backed Membrane Adhesive – DrumFor adhering U15 FB to plywood, concrete, existing bitumen and most other deck/ surface types. Please check suitability with Bauder. PU Fleece Backed Membrane AdhesiveFor adhering U15 FB to plywood, concrete, existing bitumen and most other deck/ surface types. Please check suitability with Bauder. Spray Contact AdhesiveFor adhering U15 FB to most new build deck types. Not for adhering to existing bitumen. Please check suitability with Bauder. Thermofol Contact Adhesive - DrumFor adhering U15 (Non-Fleece backed) to most new build deck types. Not for adhering to existing bitumen. Please check suitability with Bauder. |
Accessories | See 'Options below and insert requirements. |
Product Options | Detailing: The waterproofing should be turned up by at least 150 mm around features such as rooflights, parapets and service pipes passing through the roof. Detail work to upstands, edge details, flashings, etc. should be carried out using either Thermofol D membrane adhered directly to the substrate using Bauder Thermofol Contact Adhesive or mechanically fastened using Thermofol U membrane. Detailing should be carried out with a separate flashing. Consult Bauder for further information on detailing. Waterproof membrane: - Thermofol U15 FB Membrane: A fleece backed, polyester reinforced Polyvinyl Chloride (PVC) membrane, designed for both adhesive and mechanical fastening. Both mechanically fastened and adhered systems are usually installed using hot air welding techniques at the seams, where the sheets are fused together by heat, creating a totally secure homogenous layer.
- Thermofol U12, U15, U18, U20 Membrane: A polyester reinforced Polyvinyl Chloride (PVC) membrane, providing a strong, versatile solution for both adhesive and mechanically fastened roofing projects. The surface resists UV damage and is highly solar reflective in Light Grey colour. It has a high tensile strength and is reinforced with a pre-coated polyester cross-weave to make it resistant to tears and punctures, ensuring durability.
Accessories: - Bauder Thermofol D18 PVC Detailing Membrane:
- Bauder Thermofol Pre-formed Corners:
- Bauder Thermofol Laminated Metal:
- Bauder Thermofol Pre-fabricated Laminated Metal:
- Bauder Thermofol Profiles:
- Bauder single ply lightning conductors:
- Bauder Thermofol Rigid PVC rainwater outlets:
Bauder outlets are sized to indicate the actual internal diameter of the spigot. For information on non-standard sizes and refurbishment applications, please contact Bauder Technical Department.
- Bauder Leaf Guard – Long Leg for Rigid PVC Vertical Outlets:
This Bauder Leaf Guard is designed to fit into Bauder Rigid PVC rainwater outlets. For information on non-standard sizes and refurbishment applications, please contact Bauder Technical Department. - Bauder Thermofol Stainless Steel rainwater outlets: A high performance stainless steel outlet with factory installed Thermofol membrane flange. Supplied with an O-ring and a wire ball leaf grill.
Bauder outlets are sized to indicate the actual internal diameter of the spigot. For information on non-standard sizes and refurbishment applications, please contact Bauder Technical Department.
- Bauder Thermofol Rigid PVC Parapet Outlet - DN 100 mm: A rigid PVC parapet rainwater outlet enabling Thermofol membrane to be welded to the flange plate. UV stable throughout. The unbacked Thermofol membrane should be heat welded up to the aperture to ensure colour consistency on the roof.
Bauder outlets are sized to indicate the actual internal diameter of the spigot. For information on non-standard sizes and refurbishment applications, please contact Bauder Technical Department. - Bauder Thermofol Emergency Overflow Outlet: An extruded PVC emergency overflow outlet compatible with Thermofol membrane.
- Bauder Thermofol Embossed Walkway Membrane: Bauder Thermofol Embossed Walkway is a 2.0mm thick, reinforced PVC membrane with dark grey embossed finish to be loose laid over the finished membrane surface. The membrane should be heat welded around its full perimeter to the surface of the finished waterproofing. - BauderSOLAR Photovoltaic Mounting System: Bauder Flat roof PV mounting solution for framed solar modules. The mounting units are secured to the roof using a membrane-to-membrane welding technique. This installation method means that the roof is not compromised by penetrations for fixings nor is it ballasted, which would add additional weight loading to the roof. Specifically designed to be installed on Bauder bituminous or single ply waterproofing systems and provide a lightweight, low risk and quick to install mounting solution for framed solar modules. For adhered and mechanically fastened Thermofol systems, (only suitable for use with U15 FB, U18 and U20). - Bauder LiquiFIBRE Detailing Kit: Fast curing waterproofing resin containing fibre reinforcement that can be used for detailing awkward shapes or inaccessible areas where using LiquiDETAIL is impractical. PMMA-based resin that requires a catalyst and is solvent, isocyanate and halogen free. - Bauder LiquiDETAIL: Cold liquid applied fast curing waterproofing resin that can be used on upstands and details. PMMA-based resin that requires the addition of catalyst to trigger curing and is solvent, isocyanate and halogen free. - Bauder rooflights/ glazing/ ventilation: All these glazing products are fully compatible with the roof waterproofing systems. Consult Bauder for details and insert requirements.
|