NBS Source
List your products

This product is no longer available

Application

MasterSeal 586 is used for interior and exterior waterproofing of concrete and masonry, above and below ground level, where a smooth or textured finish is required.

Typical applications include:

  • Water reservoirs.
  • Tunnels.
  • Walls and floors of basements and showers.
  • External renders for structures in a harsh-weather environment.
  • Blow hole/ pore filler.

MasterSeal 586 is not suitable for retaining water with a low calcium hardness of 140 mg/l expressed as calcium carbonate content and/ or a pH value lower than 7.2 (Over coat with MasterSeal 588 or a suitable MasterSeal resin coating).

Description

MasterSeal 586 when mixed with clean water or a MasterSeal 600/ water blend to a plaster consistency produces a waterproof render/ fairing coat. It is suitable for trowel application in layers of 3–6 mm in thickness.

Features and benefits:

  • Approved under regulation 31 of the Water Supply (Water Quality) regulations 2000.
  • Three day return to service in potable water retaining structures at ≥ 3°C.
  • One day return to service in potable water retaining structures at ≥ 10°C.
  • Totally waterproof whilst providing a decorative finish.
  • Cement-based for extreme durability.
  • Capable of withstanding both positive and negative pressure.
  • Can be maintained to a high standard by high-pressure water or steam cleaning.
  • Solvent free.

Applications:

MasterSeal 586 is used for interior and exterior waterproofing of concrete and masonry, above and below ground level, where a smooth or textured finish is required.

Typical applications include:

  • Water reservoirs.
  • Tunnels.
  • Walls and floors of basements and showers.
  • External renders for structures in a harsh-weather environment.
  • Blow hole/ pore filler.

MasterSeal 586 is not suitable for retaining water with a low calcium hardness of 140 mg/l expressed as calcium carbonate content and/ or a pH value lower than 7.2 (Over coat with MasterSeal 588 or a suitable MasterSeal resin coating).

General information
Color

grey

Features

Single component, just add water, can be hand or spray applied to damp concrete , withstands positive and negative pressure, totally waterproofs whilst providing a decorative finish, can be returned back to service witihn 3 days

Uniclass 2015 Cementitious tanking mortars (Pr_20_31_53_14)
Specification data
Product Reference

MasterSeal 586

Standard product features

Technical characteristics:

  • Density: 2170 kg/m³ (approximately).
  • Working time at 20°C: 45 minutes.
  • Final set time at 20°C: 345 minutes.
  • Compressive strength: 27 N/mm².
  • Tensile strength: 3.5 N/mm².
  • Flexural strength: 6.5 N/mm².
  • Adhesive strength: 2 N/mm².

Digital objects
PlatformCompatibleVersionCertified to
Revit
Revit 2015 1 1.3
IFC
IFC2X3 1 1.3
Download now from NBS National BIM Library