NBS Source
List your products
ARDEX E 100
Application

ARDEX E 100 is used in bonding grouts or slurry coats, for the adhesion of bonded screeds in mortars based on ordinary Portland cements, masonry cements, cement/ lime and bonded renders, to cementitious backgrounds. ARDEX E 100 can also be used as an additive to:

  • Improve workability without increasing the water content of mortars.
  • Increase the compressive and tensile bending strengths of the hardened mortars.
  • Improve the elasticity and reduce crack formation in mortars.
  • Reduce surface dusting of screeds and renders while increasing their abrasion resistance.
  • Enable the minimum thickness of the modified bonded Portland cement floor screed to be reduced to 15 mm from the recommended 25 mm minimum thickness for unmodified screed mortars.

Description

ARDEX E 100 is an acrylic-based dispersion for use in screeding and rendering mortars in internal and external locations. The addition of ARDEX E 100 improves the compressive and tensile strengths, and elasticity and bond strength of the modified mortar. The workability and plastic properties of the mortar are improved without increasing the water/ cement ratio, and early age crack formation is significantly reduced. ARDEX E 100 is also designed for use in the bonding slurry/ grout mortar mixture for ARDEX A 38 Rapid Hardening and Drying Cement for floor screeds.

Features:

  • Improves the elasticity and the compressive and tensile strengths of the modified mortar.
  • Improves the workability and plastic properties of the mortar without increasing the water content.
  • Allows bonded cement and sand screeds to be applied at as little as 15 mm thickness.
  • Reduces early age crack formation and surface dusting of screeds, whilst increasing their abrasion resistance.
  • Use with ARDEX A 38 Screeding Cement as a bonding slurry/ grout.
  • For internal and external use.

Applications:

ARDEX E 100 is used in bonding grouts or slurry coats, for the adhesion of bonded screeds in mortars based on ordinary Portland cements, masonry cements, cement/ lime and bonded renders, to cementitious backgrounds. ARDEX E 100 can also be used as an additive to:

  • Improve workability without increasing the water content of mortars.
  • Increase the compressive and tensile bending strengths of the hardened mortars.
  • Improve the elasticity and reduce crack formation in mortars.
  • Reduce surface dusting of screeds and renders while increasing their abrasion resistance.
  • Enable the minimum thickness of the modified bonded Portland cement floor screed to be reduced to 15 mm from the recommended 25 mm minimum thickness for unmodified screed mortars.

General information

Features

Improves the elasticity and the compressive and tensile strengths of the modified mortar

Improves the workability and plastic properties of the mortar without increasing the water content

Allows bonded cement and sand screeds to be applied at as little as 15 mm thickness

Reduces early age crack formation and surface dusting of screeds, whilst increasing their abrasion resistance

Use with ARDEX A 38 Screeding Cement as a bonding slurry/ grout

For internal and external use

Uniclass 2015

Pr_20_31_03_64 Polymer admixturesPrimary

CAWS

M10/110 Bonded cement:sand levelling screeds

M10/115 Cement:sand levelling screeds

M10/130 Proprietary quick drying levelling screeds

M10/2 Bonded cement:sand levelling screeds

M10/4 Cement:sand levelling screeds

Specification data - Polymer admixtures

Product Reference

ARDEX E 100 Additive Bonding/ Slurry Grouts

Product Options

Adhesion to background:

Cement slurries improved with ARDEX E 100 applied onto a clean, laitance free concrete surface will have a tensile adhesion strength in excess of 2.5 N/mm² after 28 days.

Literature
Similar products from Ardex Ltd – Flooring, Tiling & Screeding products