Arbomeric MP60


A one part, high modulus, modified polymer sealant which cures, on exposure to moisture vapour, to form a tough, elastic rubber.

Suitable for internal applications in hospitals, food processing areas, clean rooms, etc. where resistance to MRSA bacteria is necessary.

Can be overpainted with a suitable protective coating if required. Note that, due to the wide variety of paint and coating systems available, a pre-test is required to assess compatibility with the paint system.

General information

Uniclass 2015

Pr_30_31_76_16 Construction joint sealantsPrimary


K13/150 Purpose-made

Product range

Modified Polymer Sealants

Specification data - Construction joint sealants

Product Reference

Arbomeric MP60



Arbo Primer 2650

Arbo Primer 2402

Arbo Primer 2172

Arbo Cleaner No.17

Xylene based, not suitable for use with plastics or delicate finishes.

Arbo Cleaner No.16

Alcohol based.

Standard product features

Specification Compliance:

  • BS EN ISO 11600: F – 25 HM.


  • White.

Technical Data:

  • Skin time at 20º C and 65 % relative humidity: 15 minutes.
  • Application temperature: +5º C to +35º C.
  • Service temperature: -40º C to +120º C.
  • Typical Shore A hardness: 55.
  • UV resistance: Very good.
  • Service life: 20+ years.
  • Cure rate at 20º C and 65% relative humidity: 2 mm per 24 hours.
  • Chemical Resistance: Resistant to most dilute acids and alkalis. Organic solvents may cause the sealant to swell and lose adhesion. Strong cleaning agents can cause surface deterioration and may affect the efficiency of the material.

Movement Accommodation:

  • Butt joints (movement in tension and compression): 35%.
  • Lap joints (movement in shear): 70%.
  • Modulus at 100% extension: 1.12 N/mm².
  • Ultimate elongation: 220%.
  • Tensile strength at break: 1.85 N/mm².

Joint size:


  • Minimum: 6 mm.
  • Maximum: 25 mm (single application); 35 mm (multiple applications).


  • Minimum: 10 mm on porous substrates (12 mm in floor joints); 6 mm on non-porous substrates (12 mm in floor joints).
  • Maximum: 20 mm.

Width: Depth ratio (within above minimum/ maximum restrictions):

  • Butt joints: 2:1.
  • Lap joints/ floor joints: 1:1.

Similar products from Carlisle Construction Materials Limited

Arbo 2020

Arbo 2020

Arbokol 1025 SP

Arbokol 1025 SP

Arbokol Secure

Arbomeric MP10

Arbomeric MP10

Arbomeric MP20

Arbomeric MP20