Arbo Membrane Adhesive
Description

Arbo Membrane Adhesive is a one part moisture curing, solvent free adhesive based on modified polymer technology. Membrane Adhesive combines good initial grab to a variety of common construction substrates with high bond strength and good flexibility. Compliance with BS EN ISO 11600–F–25 HM.

Recommended for bonding Arbo EPDM and other membranes including Butyl sheeting to aluminium (both polyester powder coated and other finishes), galvanized finishes PVC-U and mineral boards for suitable both factory and site applications. Recommended for site applications but can also be used for factory work. For porous substrates Arbo Primer 2650 is recommended.

Recommended accessories:

  • Arbo Primer 2650.
  • Arbo Cleaner No. 17 (Xylene based).
  • Arbo Cleaner No. 16 (Alcohol based).

General information

Uniclass 2015

Pr_20_31_02_80 Solvent-based synthetic rubber resin adhesivesPrimary

CAWS

J40/297 Waterproofing/ Damp proofing membrane

Specification data - Solvent-based synthetic rubber resin adhesives

Product Reference

Arbo Membrane Adhesive

Standard product features

Colour:

Black.

Product Options

Technical data:

  • Application temperature: 5–40 ºC.
  • Service temperature: -40 to +120 ºC.
  • Typical Shore A hardness: 55.
  • Cure rate at 20 ºC/ 65 % RH: 2 mm/ 24 hours. Through cure rate will be retarded where passage of moisture to the centre of a large amount of product occurs.
  • Chemical resistance: Resistant to most dilute acids and alkalis. Organic solvents may cause the sealant to swell and lose adhesion.
  • UV resistance: Very good.
  • Service life: 20 years+.
  • Elongation at break: 250%+
  • Bond strength: 141 Mpa.

Similar products from Carlisle Construction Materials Limited