NBS Source
List your products
Application

For professional use on interior and exterior walls and floors. For bonding the following:

  • Ceramic.
  • Absorbent ceramic mosaic.
  • Clinker.
  • Terracotta.
  • Cement-based, recomposed and natural stone tiles (that are not sensitive to staining and moisture).

Suitable substrates include:

  • Lime, cement and gypsum base coat plaster.
  • Gauged mortars.
  • Well cured and dry cement.
  • Anhydrite floor screeds.
  • Long-standing concrete floor slabs.
  • Cementitious waterproof coatings.
  • Existing floors.

Also suitable for use on SA 500, SV 472, SV 472 P, SR 450 or LEGEO MIX screeds, on floor screeds made using FASSACEM binder and on AQUAZIP line waterproofing products. Consult manufacturer for details.

Must be used in its original state, without the addition of other materials.

Consult manufacturer's literature for details on recommended substrate preparation and mixing instructions.

Description

Dry, pre-mixed, one-component adhesive with medium elasticity. Composed of white or grey Portland cement, selected sands and specific additives.

Features and benefits:

  • Good workability and adhesion.
  • Suitable for use on floors and walls with heating and cooling systems.
  • Extended open-time.
  • Resistant to vertical slippage.
  • Applicable with a notched trowel.
  • Suitable for small/ medium tiles.
  • Contributes to LEED® credits.
  • CE marked, and manufactured in accordance with EN 12004.

Applications:

For professional use on interior and exterior walls and floors. For bonding the following:

  • Ceramic.
  • Absorbent ceramic mosaic.
  • Clinker.
  • Terracotta.
  • Cement-based, recomposed and natural stone tiles (that are not sensitive to staining and moisture).

Suitable substrates include:

  • Lime, cement and gypsum base coat plaster.
  • Gauged mortars.
  • Well cured and dry cement.
  • Anhydrite floor screeds.
  • Long-standing concrete floor slabs.
  • Cementitious waterproof coatings.
  • Existing floors.

Also suitable for use on SA 500, SV 472, SV 472 P, SR 450 or LEGEO MIX screeds, on floor screeds made using FASSACEM binder and on AQUAZIP line waterproofing products. Consult manufacturer for details.

Must be used in its original state, without the addition of other materials.

Consult manufacturer's literature for details on recommended substrate preparation and mixing instructions.

General information

Uniclass 2015

Pr_20_31_02_12 Cementitious adhesivesPrimary

CAWS

M40/10 Natural stone covering to

M40/110 Tiling to

M40/115 Natural stone covering to

M40/12 Mosaic to

M40/120 Mosaic to

M40/5 Tiling to

Specification data - Cementitious adhesives

Product Reference

AP 71 Adhesive

Colour

Grey

White

Standard product features

Technical characteristics:

  • Form: Powder.
  • Consumption: 3–4 kg/m² (approximately).
  • Specific weight: Powder: 1300 kg/m³ (approximately); wet mix: 1650 kg/m³ (approximately).
  • Maximum thickness: 10 mm.
  • Grading: <0.6 mm.
  • Mixing water required: 28–30%.
  • Maturing time: 5 minutes (approximately).
  • Density (hardened adhesive): 1500 kg/m³ (approximately).
  • pH value: >12.
  • Drying time (at 20°C): 8 hours (approximately).
  • Application temperature: 5–35°C.
  • Tile adjustment time: 1 hour (approximately).
  • Waiting time before grouting joints: 1 day (approximately).
  • Ready for normal use: After 7–14 days (dependent on intended use and climatic conditions).
  • Conformity (to EN 12004): C2TE.

- Compliance to EN 12004:

  • Tensile adhesion (to EN 1348; initial, after water immersion, after heating, and after freeze-thaw cycles): ≥1 N/mm².
  • Extended open time (to EN 1348): ≥0.5 N/mm² after 30 minutes.
  • Vertical slippage (to EN 1348): ≤0.5 mm.

Literature
Third party certifications
  • Emissions Dans L'air Interieur: Certificate: A+
  • GEV-EMICODE: Certificate: EC1+ : Very low emission
Similar products from Fassa UK Ltd