Ancon FHR Head Restraint - 2D Detail

Material:

Austenitic stainless steel.

Product reference:

- FHR head restraint:

• Restraint for the top of internal wall, or the inner leaf of a cavity wall.

• The restraints are supplied with two holes in the longer angle to allow the restraint to fit 100 mm and 140 mm blockwork. Each restraint provides a design resistance of 1890 N.

• The FHR has two angles which clamp the top of the wall and each have 10 mm holes for a single fixing to the underside of a structural member.

- IHR-B head restraint:

• Restraint for the top of internal wall, or the inner leaf of a cavity wall.

• The standard length of an IHR sliding top section will accommodate a gap of 25–50 mm. Longer top sections are available to accommodate gaps of 51–75 mm.

• The standard height of an IHR will suit a 215 mm block. Other stem lengths are available on request, however, longer stems may be unable to accommodate a gap above 40 mm.

• The IHR-B has a single 9 mm hole to allow fixing to the underside of a structural member.

• For design resistance information at 900 mm and 450 mm centres, please refer to Ancon technical literature.

- IHR-C head restraint:

• Restraint for the top of internal wall, or the inner leaf of a cavity wall.

• The standard length of an IHR sliding top section will accommodate a gap of 25–50 mm. Longer top sections are available to accommodate gaps of 51–75 mm.

• The standard height of an IHR will suit a 215 mm block. Other stem lengths are available on request, however, longer stems may be unable to accommodate a gap above 40 mm.

• The IHR-C has a notch end to fix directly to a 38/17 or 30/20 cast-in channel

• For design resistance information at 900 mm and 450 mm centres, please refer to Ancon technical literature.

- IHR-H head restraint:

• Restraint for the top of internal wall, or the inner leaf of a cavity wall.

• The standard length of an IHR sliding top section will accommodate a gap of 25–50 mm. Longer top sections are available to accommodate gaps of 51–75 mm.

• The standard height of an IHR will suit a 215 mm block. Other stem lengths are available on request, however, longer stems may be unable to accommodate a gap above 40 mm.

• The IHR-H is supplied with a notch end to suit the hammer-on section for attachment to structural steelwork flanges without the need for site drilling.

• For design resistance information at 900 mm and 450 mm centres, please refer to Ancon technical literature.

• Refer to Ancon's 'Wall Ties and Restraint Fixings' brochure for more details on non-drill fixings for steelwork.

- IHR-S head restraint:

• Restraint for the top of internal wall, or the inner leaf of a cavity wall.

• The standard length of an IHR sliding top section will accommodate a gap of 25–50 mm. Longer top sections are available to accommodate gaps of 51–75 mm.

• The standard height of an IHR will suit a 215 mm block. Other stem lengths are available on request, however, longer stems may be unable to accommodate a gap above 40 mm.

• The IHR-S has a single 6 mm hole to allow fixing to the underside of a steel beam.

• For design resistance information at 900 mm and 450 mm centres, please refer to Ancon technical literature.

- IHR-V head restraint:

• Restraint for the top of internal wall, or the inner leaf of a cavity wall.

• The standard length of an IHR sliding top section will accommodate a gap of 25–50 mm. Longer top sections are available to accommodate gaps of 51–75 mm.

• The standard height of an IHR will suit a 215 mm block. Other stem lengths are available on request, however, longer stems may be unable to accommodate a gap above 40 mm.

• The IHR-V has a single 9 x 25 mm wide slot to allow fixing to the underside of a structural member.

• For design resistance information at 900 mm and 450 mm centres, please refer to Ancon technical literature.