Allface F1.40 aluminium support system
Verified by manufacturer over a year ago
KIWA BDA
Certificate type
A wall bracket and fixing set for vertical fixing on solid walls.
Application
Suitable for vertical fixing on solid walls.
Description
A wall bracket and fixing set for vertical fixing on solid walls. A fixing and bracket set that allows for the panels to have factory drilled undercut fastener holes in the back of the panel. Hanging hooks are attached to the panel with either special rivets and spacers or undercut bolts and washers.
Features and benefits:
- Wind pressure is passed right to the building element – no tensile load on the dowel.
- Each F1 can be used for a fixed point or a sliding point.
- The F1+ is mainly used as an anchor point. It has high load bearing capacity due to its design with a height of 175 mm combined with two wall fixing points.
- Dowel spacing of 125 mm for the F1+ makes it possible to fasten to a problematic subgrade.
- Integrated clamp-slide provides 38 mm of adjusting for the L- or T-profiles.
- Made of aluminum EN-AW 6060 T66.
General information
Color | Grey |
Material | Aluminium |
Shape | Other |
Uniclass | |
CAWS | H92/120 Rainscreen cladding |
Specification data - Aluminium carrier rails
Standards | EN-AW 6060 T66. |
Colour | Grey. |
Thermal break | I.F1.CAM pre-assembled insulator suitable for bracket F1 dimensions: 71.2 x 97 x 5 mm material: PE.I.F1.CNM single insulator suitable for bracket F1 dimensions: 71.2 x 97 x 5 mm material: PE.I+F1.CAM pre-assembled insulator suitable for bracket F1+ dimensions: 71.2 x 182 x 5 mm material: PE.I+F1.CNM single insulator suitable for bracket F1+ dimensions: 71.2 x 182 x 5 mm material: PE.I.F1.CAM AND I+F1.CAM stackable insulators to improve U-value and to compensate bumpy wall tolerances.I.F1.CNM AND I+F1.CNM stackable insulators for self-installation. |
Profiles | L. T. |
Third party certifications
KIWA BDA
BDA_AllFace_BAW-19-117-SA-A-UK