NBS Source
List your products

Dales round aluminium rainwater pipes are available in a variety of sizes.

Dales standard pipe brackets are designed to fix the pipe very close to the wall and firmly clamp the pipe into position. This makes it very difficult for vandals to climb.

Various non-standard components, e.g. offsets, stand off brackets and special hoppers, are available to suit individual requirements.


A wide range of standard components are available, however, as manufacturers, Dales Fabrications Ltd are able to offer purpose made components to suit individual project requirements.


Consult manufacturer for recommendations.

General information

Type: Polyester powder coat

Uniclass 2015
Pr_65_52_03_04 Aluminium rainwater pipes and fittingsPrimary
Specification data - Aluminium rainwater pipes and fittings
Product Reference

A3-12-000-D 76.2 mm round rainwater pipe

System finish -

Gloss powder coat

Available at standard rate for most colours.

Matt powder coat

Available at standard rate for many colours. Consult manufacturer for details.

Satin powder coat

Non-standard for most colours; a surcharge will usually apply. Consult manufacturer for details.

As drawing ___


BS 4800 ___

House colour ___

Metallic ___

A surcharge will apply. Satin and gloss finishes generally have an additional surcharge. Consult manufacturer for details.

RAL ___

As drawing ___

Fittings -

Not required

A3-14-092-D 92.5° elbow bend

A3-14-112-D 112.5° elbow bend

A3-14-135-D 135° elbow bend

As drawing ___

Contractor's choice

Access pipe

Not required

A3-15-000-D rodding pipe

As drawing ___

Contractor's choice

Pipe connector

Not required

A3-16-000-D connector

As drawing ___

Contractor's choice


Not required


As drawing ___

Contractor's choice

Offsets (adjustable)

Not required

A3-26-040-D. Maximum 400 mm offset

A3-26-060-D. Maximum 600 mm offset

A3-26-080-D. Maximum 800 mm offset

A3-26-100-D. Maximum 1000 mm offset

As drawing ___

Contractor's choice


A3-13-000-D bracket

Standard round pipe bracket.

A3-13-030-D stand off bracket

30 mm offset round pipe bracket.

As drawing ___

Contractor's choice

Standard product features


  • Diameter: 76.2 mm.
  • Thickness: 1.6 mm.
  • Length: 3 m.


Type: Polyester powder coat.

Product Options


Texture: Gloss, matt or satin. Cost is dependent upon the colour/ texture combination selected, and the quantity required. Consult manufacturer for details.


Ranges: Around 200 colours are available, taken from the BS 4800 and RAL ranges, a House range and a range of Metallics.

Similar products from Dales Fabrications Ltd - Aluminium Eaves Products