NBS Source
List your products
4.4.2 - Roof: Flat or Tapered Insulation with Membranes and Green Planting

4.4.2 - Roof: Flat or Tapered Insulation with Membranes and Green Planting

Third party certifications:
  • BSI Kitemark

    BSI Kitemark

    Certificate type

  • QA Certificate

    QA Certificate

    Certificate type

FOAMGLAS®

FOAMGLAS® Compact Roof Systems: Compact Flat Roof with paving slabs or interlocking paving stones on reinforced concrete deck

Jump to:
+44 (0)20 7492 1731 www.foamglas.co.uk
Description

Properties:

  • Waterproof.
  • High compressive strength without deflection or movement.
  • Non-combustible.
  • Impervious to water and water vapour.
  • Sealed cellular structure.
  • Dimensionally stable.
  • Acid resistant.
  • Easily cut to shape.
  • Resistant to vermin.
  • Recycled content scrap glass: Minimum 60%.
  • Ozone Depletion Potential (ODP): <1%.
  • Global Warming Potential (GWP): Zero.
  • GreenSpec rating, see 'Cellular Glass' or 'Foamed Glass'.
  • Green Guide rating, see 'Cellular Glass'.

Advantages:

  • Quality: Systems with high quality materials; management by systematic site inspections and professional consulting.
  • Cost efficiency: The high durability preserves maximum value and ensures minimal maintenance costs.
  • Sustainability: Optimum insulation performance and protection against moisture for future generations. Scrap can be reclaimed and re-cycled to make new Foamglas.
  • Insulation performance: Insulation performance is permanent; ageing does not take place. Use above and below ground, unaffected by moisture, humidity and compressive loads. Proven to retain its thermal and vapour control characteristics for ˃ 50 years.
  • No thermal bridging: Fully bonded insulation systems, zero fixings prevent thermal bridging, eliminating the risk of fixings corrosion.
  • Non-toxic: Foamglas cellular glass contains no toxic substances, does not contaminate water or the ground, in cases of fire, does not develop fumes or toxic gases.
  • Sealed structure and non-hydroscopic: Each cell has a glass wall, giving the unique structural strength, vapour tight and non-hydroscopic properties.
  • A separate vapour barrier is not required: With its purpose manufactured adhesives, Foamglas is suitable for extreme humidity environments and gives control of the vapour drive in any direction. Foamglas is an insulation and vapour barrier in one single material.
  • High compressive strength: Capability to withstand high compressive loads without deflection or movement.
  • Dimensional stability: Very low rates of thermal movement, mechanical fixings are not required to prevent delamination from the parent structure.
  • Reduced weight on the structure, screed to fall not required.
  • Bespoke tapered insulation design service available.

General information
Uniclass 2015
Pr_25_71_52_13 Cellular glass insulation boardsPrimary
CAWS

Q37/110 Intensive green roof

Q37/130 Extensive green roof

Q37/120 Simple intensive green roof

Specification data - Cellular glass insulation boards
Product Reference

4.4.2 Roof: Flat or Tapered Insulation with Membranes and Green Planting

Primer

PC®EM

Adhesive

PC® 500

Insulation -
Type

Foamglas® Readyblock (T4+)

Foamglas® Slab (T4+)

Thickness

Tapered

See 'Options' below.

40 mm

50 mm

60 mm

70 mm

80 mm

90 mm

100 mm

110 mm

120 mm

130 mm

140 mm

150 mm

160 mm

170 mm

180 mm

Top layer

Two layers of bituminous waterproofing membranes, top layer UV-resistant, as section J41, clauses 400 or 405

Protective layer

Required, as section Q37, clause 330

Surface protection

Planting, extensive or intensive, as section Q37, clauses 370–400

Standard product features

Characteristics:

  • Thermal performance is permanent and never changes.
  • Manufactured from recycled glass (minimum 60%) and natural raw materials which are available in abundant supply - sand.
  • The insulation is totally inorganic, contains no ozone depleting propellants (CFCs, HCFCs etc), flame resistant additives or binders; VOC or other volatile substances.
  • For substrate quality and suitability, see Technical Guide TG1.

- Foamglas® Ready Block (T4+):

  • Density (EN 1602, ± 10%): 115 kg/m³.
  • Length (EN 822, ± 5 mm): 600 mm.
  • Width (EN 822, ± 2 mm): 450 mm.
  • Thermal conductivity (EN ISO 10456): ≤ 0.041 W/m·K.
  • Reaction to fire (EN 13501-1): Core material Euroclass A1.
  • Compressive strength (EN 826 annexe A): ≥ 600 kPa.
  • Flexural modulus of elasticity (EN12089) 700 MN/m².
  • Bending strength (EN 12089): ≥ 450 kPa.
  • Tensile strength (EN 1607): ≥ 100 kPa.
  • Thermal expansion coefficient (EN13471): 9 x 10-6 K.
  • Impervious to water vapour (EN ISO 10456): µ=∞ infinity.
  • Green Guide rating A.
  • CEN Keymark: 001-BK-516-001-0030-T00A.
  • CPR DOP 120211015.

- Foamglas® Slab (T4+):

  • Density (EN 1602, ± 10%): 115 kg/m³.
  • Length (EN 822, ± 5 mm): 600 mm.
  • Width (EN 822, ± 2 mm): 450 mm.
  • Thermal conductivity (EN ISO 10456): ≤ 0.041 W/m·K.
  • Reaction to fire (EN 13501-1): Euroclass A1.
  • Compressive strength (EN 826 annexe A): ≥ 600 kPa.
  • Flexural modulus of elasticity (EN12089): 700 MN/m².
  • Bending strength (EN 12089): ≥ 450 kPa.
  • Tensile strength (EN 1607): ≥ 100 kPa.
  • Thermal expansion coefficient (EN13471): 9 x 10-6 K.
  • Impervious to water vapour (EN ISO 10456): µ=∞ infinity.
  • Green Guide rating A.
  • Flat: CEN Keymark: 001-BK-516-001-0026-T00A.
  • Tapered: CEN Keymark: 001-BK-516-001-0032-T00A.
  • CPR DOP 100010015.

Product Options

Insulation:

- Thickness:

Foamglas insulation, factory produced with a tapered thickness, available in a wide range of gradients from 0.55% (1:180) to 6.7% (1:15). For flat insulation thicknesses of ˃180 mm, use double layers of minimum 90 mm per layer.

  • Base Layer: Foamglas® Slab (T4+).
  • Top Layer: Foamglas® Ready Block (T4+) or Foamglas® Ready Block (T4+) Tapered.

Contact manufacturer for further information as a bespoke tapered CAD design service is available.

Digital objects
PlatformCompatibleVersionCertified to
IFC
 IFC2X3 2 1.3
Revit
 Revit 2016 3 2.0
Download now from NBS National BIM Library
Literature
Third party certifications
  • Foamglas Insulation: File BM730-585 certificate 0603. : Manufactured to Environmental Management System ISO 14001
  • Alliance for Sustainable Building Products: Foamglas Insulation Nature Plus certificate number 0406-1101-101-1. : Nature Plus recognised and approved
Similar products from FOAMGLAS®

© 2020 NBS Enterprises Ltd. All rights reserved.