NBS Source
I'm a manufacturer

18970HZ MINT SV ELK PC Electrically Coupled

Verified by manufacturer 3 months ago

Glutz UK Ltd

Multiple locking, self-locking, electrically couplable, panic C.

Jump to:
+44 (0)1376 348808 Website

Application

For main and side entrance doors with electrically controlled lever handle operation in residential/ commercial construction and police and court buildings with high-security doors.

Description

Multi-point lock with U-shaped forend, feedback contacts, integrated self-locking, latch blocking and sequence control. The Panic C function with split lock follower and separate lever handle control (outside/ inside) offers the combination of access control and escape route. Access is controlled via an ID-system (e.g. badge) or the cylinder.


Note: Cylinder screw is not in the centre of the forend. To determine the cylinder lengths: Centre of forend = centre of lock cylinder. No reduction sleeves are permitted for the lock follower/mandrel. Only use internal bolt switching contact. Only use the 5920/ 59105 HESO panic square spindle. Keep lever handle on escutcheons/rosettes for rotation (easyfix®). Tamper protection according to EN 14846: Set 11105 MS required.


Features and benefits:

  • Solid 20 mm bolt on secondary boxes (20 kN).
  • Three-part, split lock follower; 4-ct. 9 mm.
  • Electrically couplable outside handle.
  • Emergency opening via cylinder (forced closing function).
  • Panic C: Panic side can be changed in/ out.
  • Monitoring contacts: lever handle L/R, bolt and door status, cylinder integrated.
  • Operating mode: idle/ working current can be changed over (DIP switch).
  • Opening impulse protected against manipulation: can be switched on/ off (DIP switch).
  • Operating voltage: 12/24 V d.c. ±15%; 100/50 mA.
  • Inputs: 12/24 V d.c. to GND.
  • Outputs: potential-free; load capacity 30 V d.c./ 100 mA.
  • Slide lock: top/ bottom mechanical.
  • Damped, DIN L/R convertible comfort latch.
  • Suitable for rotary knob cylinders.
  • Follower turning angle 35°.

General information

Color

Silver

Finish

Matt

Material

Stainless steel

Length

1724 mm

2050 mm

2150 mm

2250 mm

Height

24 mm

Uniclass

Pr_30_36_08_54 Multipoint door locksPrimary

CAWS

P21/530 Special function door locks

P21/26 Special function door locks

Specification data - Multipoint door locks

Lock type

Multipoint mortice lock.

Category of use

-

Standard

To DIN EN 15685, EN 14846, EN 1125 and EN 179.

Guidance for specification option:

Tamper protection according to EN 14846: Set 11105 MS required.

Backset

80 mm.

Material and finish

Matt stainless steel faceplate.

Manufacturer guidance

Other finishes on request.

Operating voltage

12/24 V d.c. +/-15%; 100/50 mA.

Cut-outs

RZ, 74 mm.

PZ, 72 mm.

Locks with follower

9 mm.

Forend

U-shaped, 24 x 1724 mm.

U-shaped, 24 x 2050 mm.

U-shaped, 24 x 2150 mm.

U-shaped, 24 x 2250 mm.

Options

None.

With drill protection.