NBS Source
I'm a manufacturer
Compare variants

18939 MINT Combi with Hook Bolts

Verified by manufacturer 3 months ago

CH

Glutz UK Ltd Variant:

Multipoint lock, combi (lever handle and key operated).

Jump to:
+44 (0)1376 348808 Website

Application

For use in house and apartment entrance doors/hallway doors and in commercial buildings in difficult weather conditions or with a higher door seal pressure.

Description

Multipoint lock, combi, with simple locking and unlocking using the lever handle followed by very smooth securing via the cylinder.


The reversible DIN L+R comfort latch guarantees that the latch extends quietly and enters the striking plate gently. The solid design, hardened main bolt and two additional hardened hookbolts allow for construction of door systems up to RC3 resistance class. The lock is approved for fire resistance and smoke control tests in accordance with EN 1634.


Note: The cylinder screw is not centred in the forend. To determine the cylinder lengths: centre of forend = centre of lock cylinder. Do not use a reduction sleeve for the follower/ square spindle.


Features and benefits:

  • Latch and lever handle blocking.
  • Four-part clamp follower, square 8/8.5/9 mm.
  • Without latch withdrawal.
  • Simple locking and unlocking using the lever handle.
  • Very smooth securing via the cylinder; single throw.
  • Hardened main bolt; 20 mm throw.
  • Two additional hardened bolts; 20 mm throw.
  • Dampened, reversible DIN L+R comfort latch with latch blocking.
  • Simultaneous latch and lever handle blocking.

General information

Color

Silver

Finish

Matt

Material

Stainless steel

Length

1744 mm

1788 mm

1850 mm

Height

18 mm

20 mm

Uniclass

Pr_30_36_08_54 Multipoint door locksPrimary

CAWS

P21/26 Special function door locks

P21/530 Special function door locks

Specification data - Multipoint door locks

Lock type

Multipoint mortice lock.

Category of use

-

Standard

To DIN 18251-3.

Backset

60 mm.

70 mm.

80 mm.

Material and finish

Matt stainless steel faceplate.

Manufacturer guidance

Other finishes on request.

Cut-outs

RZ, 78 mm.

PZ, 78 mm.

Locks with follower

8 mm.

9 mm.

Forend

Radiussed, 18 x 1788 mm.

Radiussed, 20 x 1788 mm.

Locking

Lever handle: Lockable lock follower, tested to 80 Nm in accordance with EN 12209.

Similar products from Glutz UK Ltd

18920 MINT SB PE

18920 MINT SB PE

18931 MINT SB

18931 MINT SB

18936 MINT E-Beschlag

18936 MINT E-Beschlag

18938 MINT Combi

18938 MINT Combi

18945 MINT SV PE

18945 MINT SV PE

18947 MINT SVM eco PE

18947 MINT SVM eco PE

18951 MINT SB

18951 MINT SB

18962 MINT SV PB

18962 MINT SV PB

18970 MINT SV ELK PC Electrically Coupled

18970 MINT SV ELK PC Electrically Coupled

18970HZ MINT SV ELK PC Electrically Coupled

18970HZ MINT SV ELK PC Electrically Coupled