18939 MINT Combi with Hook Bolts
Verified by manufacturer 3 months ago
CH
CH
Multipoint lock, combi (lever handle and key operated).
Application
For use in house and apartment entrance doors/hallway doors and in commercial buildings in difficult weather conditions or with a higher door seal pressure.
Description
Multipoint lock, combi, with simple locking and unlocking using the lever handle followed by very smooth securing via the cylinder.
The reversible DIN L+R comfort latch guarantees that the latch extends quietly and enters the striking plate gently. The solid design, hardened main bolt and two additional hardened hookbolts allow for construction of door systems up to RC3 resistance class. The lock is approved for fire resistance and smoke control tests in accordance with EN 1634.
Note: The cylinder screw is not centred in the forend. To determine the cylinder lengths: centre of forend = centre of lock cylinder. Do not use a reduction sleeve for the follower/ square spindle.
Features and benefits:
- Latch and lever handle blocking.
- Four-part clamp follower, square 8/8.5/9 mm.
- Without latch withdrawal.
- Simple locking and unlocking using the lever handle.
- Very smooth securing via the cylinder; single throw.
- Hardened main bolt; 20 mm throw.
- Two additional hardened bolts; 20 mm throw.
- Dampened, reversible DIN L+R comfort latch with latch blocking.
- Simultaneous latch and lever handle blocking.
General information
Color | Silver |
Finish | Matt |
Material | Stainless steel |
Length | 1744 mm 1788 mm 1850 mm |
Height | 18 mm 20 mm |
Uniclass | |
CAWS | P21/26 Special function door locks P21/530 Special function door locks |
Specification data - Multipoint door locks
Lock type | Multipoint mortice lock. |
Category of use | |
Standard | To DIN 18251-3. |
Backset | 60 mm.70 mm.80 mm. |
Material and finish | Matt stainless steel faceplate.Manufacturer guidanceOther finishes on request. |
Cut-outs | RZ, 78 mm. PZ, 78 mm. |
Locks with follower | 8 mm. 9 mm. |
Forend | Radiussed, 18 x 1788 mm. Radiussed, 20 x 1788 mm. |
Locking | Lever handle: Lockable lock follower, tested to 80 Nm in accordance with EN 12209. |