Verified by manufacturer 3 months ago
CH
Mortice lock, self-locking, electric coupling on both sides BK.
For applications with controlled lever handle operation with varying access requirements in residential and commercial buildings.
Mortice lock, self-locking, electric coupling on both sides The lever handles L or R can be separately electrically coupled or decoupled, permanently if required. Entry and exit is controlled via an identification system (e.g. badge) or the cylinder. By holding the cylinder, both lever handles can be temporarily coupled or decoupled (emergency opening) simultaneously.
Note: The cylinder screw is not centred in the forend. To determine the cylinder lengths: centre of forend = centre of lock cylinder. Do not use asymmetric cylinders with "L-cam". Do not use a reduction sleeve for the follower/square spindle. No external, mechanical bolt-switch contact is recommended. Only use the 5920 HESO panic spindle. Mount lever handles rotatably fixed on plates/rosettes (easyfix®). The 11105 MS-Set must be used to operate the lock.
Features and benefits:
Color | Silver |
Finish | Matt |
Material | Stainless steel |
Length | 300 mm |
Height | 18 mm 20 mm |
Uniclass | |
CAWS | P21/24 Door locks P21/515 Door locks |
Standard | To EN 12209, EN 14846. |
Latch or lock type | Electromechanical mortice lock. |
Backset | 60 mm.70 mm.80 mm. |
Material and finish | Matt stainless steel faceplate.Manufacturer guidanceOther finishes on request. |
Operating voltage | 12/24 V d.c. +/-15%; 200/50 mA. |
Cut-outs | RZ, 78 mm. PZ, 78 mm. |
Locks with follower | 9 mm. |
Forend | Radiussed, 18 x 300 mm. Radiussed, 20 x 300 mm. |