NBS Source
List your products
Knauf Insulation Ltd

Knauf Insulation Ltd

Challenge. Create. Care.

+44 (0)1744 766 666 www.knaufinsulation.co.uk

Sort by:

Showing 1-36 of 42

Knauf Insulation Building Slab RS45 Insulation Data Sheet

Knauf Insulation Building Slab RS45 Insulation Data Sheet

Knauf Insulation Ltd

Building Slabs are non-combustible Rock Mineral Wool slabs, manufactured using our revolutionary ECOSE® Technology in a range of densities, and are designed for use in multiple applications. Building Slab RS45 is manufactured with a density of 45kg/m3, designed for use in a variety of applications including internal partitions, timber and metal studs, and in between timber rafters and floor joists.
Knauf Insulation DriTherm 32 Ultimate Cavity Slab Insulation Data Sheet

Knauf Insulation DriTherm 32 Ultimate Cavity Slab Insulation Data Sheet

Knauf Insulation Ltd

DriTherm Cavity Slabs are non-combustible Glass Mineral Wool slabs, manufactured using our revolutionary ECOSE® Technology and a water repellent additive, designed for use in external masonry cavity walls to provide a full-fill insulation solution which is installed as walls are being built. They are 455mm wide to suit standard vertical wall tie spacings allowing a closed joint with adjacent slabs.
Knauf Insulation Fire-teK BD 917 Insulation Data Sheet

Knauf Insulation Fire-teK BD 917 Insulation Data Sheet

Knauf Insulation Ltd

Fire-teK BD 917 is a non-combustible, rigid Rock Mineral Wool slab reinforced with an aluminium foil facing to one side, for use in the fire protection of HVAC steel ductwork for up to 120 minutes. - Non-combustible with a melting point in excess of 1000°C - Provide up to 2 hours fire protection to steel ductwork. - Applied in a single thickness - Slabs are faced with a bright Class O reinforced aluminium foil, making it suitable for applications above clean rooms, within air plenums or for aesthetic purposes. - The fixing system of welded pins and square edge butt joints gives a fast and simple system
Knauf Insulation Fire-teK Beam and Column Slab and Fire-teK Dry Fix Noggin Slab Data Sheet

Knauf Insulation Fire-teK Beam and Column Slab and Fire-teK Dry Fix Noggin Slab Data Sheet

Knauf Insulation Ltd

Fire-teK Beam and Column Slab is a high density, resilient and non-combustible rock mineral wool slab. It is available un-faced or faced with a Bright Class O reinforced aluminium foil. It is also available tissue faced, subject to enquiry. Fire-teK Dry Fix Noggin Slab is an extra high density, resilient and non-combustible, easy to cut, rock mineral wool slab for use in the Fire-teK Dry Fix System.
Knauf Insulation Loft Roll 40 Insulation Data Sheet

Knauf Insulation Loft Roll 40 Insulation Data Sheet

Knauf Insulation Ltd

Loft Rolls are non-combustible, Glass Mineral Wool rolls, manufactured using our revolutionary ECOSE® Technology, and are designed specifically for use in cold lofts where pitched roofs are insulated at ceiling level. Loft Roll 40 provides a superior performance with a thermal conductivity of 0.040 W/mK. Combi-cut products have partially cut perforations, providing the flexibility to be used between joists at either 400mm or 600mm centres, or used unsplit as a full-width roll.
Knauf Insulation Loft Roll 44 Insulation Data Sheet

Knauf Insulation Loft Roll 44 Insulation Data Sheet

Knauf Insulation Ltd

Loft Rolls are non-combustible, Glass Mineral Wool rolls, manufactured using our revolutionary ECOSE® Technology, and are designed specifically for use in cold lofts where pitched roofs are insulated at ceiling level. Combi-cut products have partially cut perforations, providing the flexibility to be used between joists at either 400mm or 600mm centres,or used unsplit as a full-width roll. Ready-cut products are fully cut, and are designed to be used between joists at 600mm centres. Loft Roll 44 has a thermal conductivity of 0.044 W/mK.
Knauf Insulation Supafil® CarbonPlus Data Sheet

Knauf Insulation Supafil® CarbonPlus Data Sheet

Knauf Insulation Ltd

Supafil® CarbonPlus Cavity Wall Insulation is especially designed for installation into existing buildings with hard-to-treat cavity walls, and is an unbonded, non-combustible glass mineral wool insulation which requires no mixing on site. Supafil® CarbonPlus Cavity Wall Insulation is specifically designed to be used in existing masonry cavity walls which are deemed hard-to-treat, and is suitable for use in narrow cavities down to 40mm.

Showing 1-36 of 42