Knauf Insulation Ltd

Knauf Insulation Ltd

Challenge. Create. Care.

+44 (0)1744 766 666 www.knaufinsulation.co.uk

Sort by:

Showing 1-36 of 42

Knauf Insulation DriTherm 32 Ultimate Cavity Slab Insulation Data Sheet

Knauf Insulation DriTherm 32 Ultimate Cavity Slab Insulation Data Sheet

Knauf Insulation Ltd

DriTherm Cavity Slabs are non-combustible Glass Mineral Wool slabs, manufactured using our revolutionary ECOSE® Technology and a water repellent additive, designed for use in external masonry cavity walls to provide a full-fill insulation solution which is installed as walls are being built. They are 455mm wide to suit standard vertical wall tie spacings allowing a closed joint with adjacent slabs.
Knauf Insulation Fire-teK BD 917 Insulation Data Sheet

Knauf Insulation Fire-teK BD 917 Insulation Data Sheet

Knauf Insulation Ltd

Fire-teK BD 917 is a non-combustible, rigid Rock Mineral Wool slab reinforced with an aluminium foil facing to one side, for use in the fire protection of HVAC steel ductwork for up to 120 minutes. - Non-combustible with a melting point in excess of 1000°C - Provide up to 2 hours fire protection to steel ductwork. - Applied in a single thickness - Slabs are faced with a bright Class O reinforced aluminium foil, making it suitable for applications above clean rooms, within air plenums or for aesthetic purposes. - The fixing system of welded pins and square edge butt joints gives a fast and simple system
Knauf Insulation Fire-teK Beam and Column Slab and Fire-teK Dry Fix Noggin Slab Data Sheet

Knauf Insulation Fire-teK Beam and Column Slab and Fire-teK Dry Fix Noggin Slab Data Sheet

Knauf Insulation Ltd

Fire-teK Beam and Column Slab is a high density, resilient and non-combustible rock mineral wool slab. It is available un-faced or faced with a Bright Class O reinforced aluminium foil. It is also available tissue faced, subject to enquiry. Fire-teK Dry Fix Noggin Slab is an extra high density, resilient and non-combustible, easy to cut, rock mineral wool slab for use in the Fire-teK Dry Fix System.
Knauf Insulation Loft Roll 40 Insulation Data Sheet

Knauf Insulation Loft Roll 40 Insulation Data Sheet

Knauf Insulation Ltd

Loft Rolls are non-combustible, Glass Mineral Wool rolls, manufactured using our revolutionary ECOSE® Technology, and are designed specifically for use in cold lofts where pitched roofs are insulated at ceiling level. Loft Roll 40 provides a superior performance with a thermal conductivity of 0.040 W/mK. Combi-cut products have partially cut perforations, providing the flexibility to be used between joists at either 400mm or 600mm centres, or used unsplit as a full-width roll.
Knauf Insulation Loft Roll 44 Insulation Data Sheet

Knauf Insulation Loft Roll 44 Insulation Data Sheet

Knauf Insulation Ltd

Loft Rolls are non-combustible, Glass Mineral Wool rolls, manufactured using our revolutionary ECOSE® Technology, and are designed specifically for use in cold lofts where pitched roofs are insulated at ceiling level. Combi-cut products have partially cut perforations, providing the flexibility to be used between joists at either 400mm or 600mm centres,or used unsplit as a full-width roll. Ready-cut products are fully cut, and are designed to be used between joists at 600mm centres. Loft Roll 44 has a thermal conductivity of 0.044 W/mK.
Knauf Insulation Supafil® CarbonPlus Data Sheet

Knauf Insulation Supafil® CarbonPlus Data Sheet

Knauf Insulation Ltd

Supafil® CarbonPlus Cavity Wall Insulation is especially designed for installation into existing buildings with hard-to-treat cavity walls, and is an unbonded, non-combustible glass mineral wool insulation which requires no mixing on site. Supafil® CarbonPlus Cavity Wall Insulation is specifically designed to be used in existing masonry cavity walls which are deemed hard-to-treat, and is suitable for use in narrow cavities down to 40mm.

Showing 1-36 of 42