IG Masonry Support Ltd

Products used Welded Masonry Support, Brick Slip Lintels, B.O.S.S. System, Titan Max System • Architect Coady Architects in collaboration with Feilden Clegg Bradley • Contractor JJ Rhatigan & Co Ltd (Galway)OverviewIG Masonry Support was able to supply a range of its products within a tight revised timeframe on a new-build student accommodation development at National University of Ireland (NUI) constituent university in Galway.Founded in 1845, NUI Galway is ranked among the top 1% of universities and has been inspiring students for 175 years. NUI Galway has earned international recognition as a research-led university with a commitment to top quality teaching, and has colleges spanning arts and social sciences, medicine, policy and engineering.Designed by Coady Partnership Architects, IG Masonry Support worked with the contractor JJ Rhatigan on Phase 1 of the construction of Goldcrest Village, a major state-of-the-art student accommodation as part of NUI Galway.The 429-bed student residence was constructed to the north of the NUI Galway city centre campus, adjacent to the Lifecourse Science Building and the Science Research Building. Near the existing Corrib Village student accommodation, Goldcrest Village offers a total area of 12,500m2, with apartments of five or six bedrooms with en-suites, shared kitchen, dining and living rooms. Four buildings up to five storeys high enclose two courtyards, with the tallest near a pedestrian and cycle route that links the development to the main campus. Communal facilities and a reception are centrally located for the students to access.For this modern and vibrant build, IG Masonry Support’s products were specified due to an established existing relationship with JJ Rhatigan, a contractor which is well-versed on IG Masonry Support’s systems.The ChallengeThe project’s main challenge was achieving the specified brick soffit in a short amount of time to a high-standard of quality and finish.Due to a large change to Building A’s facade, IG Masonry Support’s teams had to adapt quickly whilst the project was live. The project deadline did not change however, which meant manufacturing times were tight. A six-week job had to be turned around in five days without compromise to delivery or quality.Furthermore, the installation of IG Masonry Support systems was to take place whilst students were on campus. This meant that high standards of health and safety precautions had to be upheld and followed at all times.The SolutionIG Masonry Support manufactured its B.O.S.S. (Brick on Soffit System) and Brick Slip Lintels to be installed on the buildings within the new Goldcrest Village development.The B.O.S.S. range is a lightweight prefabricated system that is faster to install than traditional hanging brick systems. Installed to a pre-fitted masonry support system, B.O.S.S. allows increased adjustability along three axes. Produced offsite, B.O.S.S. offers 90% time saving onsite and negates the need for mechanical lifting. B.O.S.S. also removes the need for brick-cutting onsite, resulting in a quality system that is checked before it arrives onsite.IG Masonry Support Brick Slip Lintels can be used over small openings to eliminate the need for additional masonry support. They are delivered to site as a one-piece unit, complete with brick slips attached, eliminating the need for specialist installation onsite.A simpler and easier install when delivered to site was a huge benefit on this project. Not only did the swift installation enable time and cost savings in terms of labour, it ensured a better-quality finish and met the desired specification. This translated into achieving the required brick patterns and soffit sizes which blended seamlessly with the surrounding brickwork.Going above and beyond even on a project with a tight timeframe, IG Masonry Support delivered Masonry Support from Level 2 of Building A. When this was installed, the contractors could determine the finished bond pattern of Level 1 B.O.S.S. units to inform the patterning of the levels beyond, ensuring the same quality finish was met.Throughout the project, IG Masonry Support’s technical division worked with the teams to ensure all products hit the mark on safety and quality.A striking student accommodation complex within NUI Galway, the presence of IG Masonry Support systems will help ensure students live in areas that are of the highest quality throughout the academic years.

Regent’s Park Regeneration is a £72m development which has seen the creation of 122 affordable new homes and community facilities in Camden, north-west London. The scheme, on behalf of Camden Council, followed the demolition of housing and businesses in the area to make way for the High Speed 2 rail link between London and the West Midlands. As a result, Lovell Homes London, in conjunction with architects Ingleton Wood, was selected to deliver the new homes across eight sites within the existing estate. The one-to-five-bedroom apartments are situated in an inner-city location with buildings ranging from three-to-eleven storeys in height.