NBS Source
List your products

CETCO

OUR STANDARDS. YOUR PEACE OF MIND.

+44 (0) 151 606 5211 www.cetco.co.uk

Sort by:

Showing 1-25 of 25

BENTOGROUT® - REMEDIAL WATERPROOFING INJECTION GROUT

BENTOGROUT® is a high-solids grout consisting of a proprietary blend of bentonite and polymers formulated for sealing water leaks in existing below-ground structures. BENTOGROUT® is pumped in a fluid state adjacent to the exterior of the structure where it sets into a gelatinous state forming a waterproofing barrier. BENTOGROUT® can be used to seal leaks in concrete, masonry block, brick, and stone foundations.

BENTOSEAL - TROWEL-GRADE SODIUM BENTONITE MASTIC

BENTOSEAL® is trowel-grade, sodium bentonite/butyl-rubber based mastic designed for a variety of surface preparation and waterproof detailing work with select CETCO waterproofing membranes. BENTOSEAL® swells upon contact with water to seal against water intrusion. BENTOSEAL® is easy to apply and bonds to most substrate materials. BENTOSEAL® is an below-ground waterproofing accessory product designed for the following uses: Fillet material at horizontal and vertical inside corners Flashing material around drains, mechanical and electrical penetrations, curbs and parapets Sealing material at waterproofing terminations below-ground Repair material for small concrete substrate surface defects prior to waterproofing membrane installation

COREFLEX XP - THERMOPLASTIC WATERPROOFING MEMBRANE WITH XP TECHNOLOGY CORE

COREFLEX XP is a 1.5 mm nominal thermoplastic membrane reinforced with a 90 gram/ sqm polyester reinforcing scrim integrally bonded to an XP Technology Core. COREFLEX XP offers the ultimate in waterproofing barrier protection featuring XP technology, the latest innovation in active waterproofing. This advanced polymer technology provides exceptional performance in a wide range of ground contaminates, including high-salinity conditions. The barrier performance starts with a thermoplastic membrane with welded seams providing a monolithic watertight barrier layer. The thermoplastic membrane is reinforced with a polyester reinforcing scrim and is produced with DuPonts Elvaloy-KEE® (Keytone Ethylene Ester), a solid phase high molecular weight ethylene interpolymer.

COREFLEX® - THERMOPLASTIC WATERPROOFING WITH AN ACTIVE LAYER

COREFLEX is designed for waterproofing applications where the product is properly covered and confined. COREFLEX should only be installed after substrate preparation has been properly completed and is suitable to receive the waterproofing system. COREFLEX should be used with structural grade reinforced castin- place concrete with conventional forms that produce a smooth surface. Use COREFLEX with reinforced shotcrete walls conforming to ACI 506 Core Grade 1 or 2; minimum 200 mm thick, applied from the bottom up in their full wall structural design thickness in a single application per shotcrete lift. Consult CETCO for guidelines for stay-in-place concrete forms.

COREFLEX® XP - THERMOPLASTIC WATERPROOFING MEMBRANE WITH XP TECHNOLOGY CORE

COREFLEX® XP sets the industry standard for waterproofing membrane strength, durability and performance. COREFLEX® XP consists of a thermoplastic membrane integrally bonded to a proprietary active XP Technology Core layer. Combined with fully welded seams, this provides the ultimate waterproofing protection. Whether your project requires foundation waterproofing, plaza deck restoration, or green roof construction, COREFLEX® XP provides superior waterproofing performance. The COREFLEX® XP reinforced thermoplastic membrane is engineered to resist high hydrostatic pressure and groundwater contaminants typical of foundation conditions. In addition to waterproofing performance, the membrane has extremely low water vapour transmission properties.

SEAL-X XP - ACTIVE POLYMER TROWEL-GRADE SEALANT

SEAL-X XP is trowel-grade mastic designed for a variety of surface preparation and detailing work with ULTRASEAL XP and other CETCO active waterproofing membranes. Featuring XP technology hydrophilic polymer, SEAL-X XP swells upon contact with water to form a watertight barrier in fresh to high-saline water conditions. With the consistency of thick grease, SEAL-X XP is easy to apply and bonds to most building materials.

SWELLTITE® - COMPOSITE BENTONITE WATERPROOFING SYSTEM

SWELLTITE® is a highly effective waterproofing membrane consisting of a sodium bentonite compound integrally bonded to a geomembrane liner. This composite combines the active waterproofing benefits of sodium bentonite with the strength and durability of a thick geomembrane liner. Unlike other membrane systems that require precise installation, SWELLTITE®s reactive bentonite compound can expand to seal small punctures in the membrane. SWELLTITE® works by forming a continuous membrane upon hydration with water. When confined under pressure, the swell is controlled, forming a dense, positive seal against the concrete. Proven quality and ease of installation have made SWELLTITE® a market leader in the waterproofing industry.

SWELLTITE® - COMPOSITE BENTONITE WATERPROOFING SYSTEM

SWELLTITE is a highly effective waterproofing composite of sodium bentonite compound integrally bonded to a geomembrane liner. This composition combines the active waterproofing benefits of sodium bentonite with the strength and puncture resistance of a thick geomembrane liner.

ULTRASEAL XP - ACTIVE POLYMER WATERPROOFING MEMBRANE

ULTRASEAL® XP features XP technology, the latest innovation in active waterproofing. This advanced polymer technology provides exceptional performance in a wide range of ground contaminates, including high-saline conditions. Unlike passive membranes when used alone, the self-sealing ability of the active XP technology enables the ULTRASEAL® XP waterproofing membrane to seal minor cuts or damage to the membrane. And most importantly, it has been proven effective in both hydrostatic and non-hydrostatic conditions.

ULTRASEAL® XP - ACTIVE POLYMER WATERPROOFING SYSTEM

ULTRASEAL® XP is the latest innovation in active waterproofing. This advanced polymer technology provides exceptional performance in a wide-range of ground contaminates including high-saline conditions. In addition, the durable geomembrane makes ULTRASEAL® XP 10 times less permeable then traditional hydro-philic membranes. The swelling action of the XP layer can also self-seal small concrete cracks caused by ground settlement and concrete shrinkage. And most importantly, it has been proven effective in both hydrostatic and non-hydrostatic conditions. ULTRASEAL® XP can be installed directly to green concrete and in extreme temperatures, thus providing greater flexibility to the construction schedule.

ULTRASEAL® XP - AN ACTIVE WATERPROOFING MEMBRANE FOR EXCEPTIONAL PERFORMANCE IN A WIDE-RANGE OF CONTAMINATED ENVIRONMENTS

ULTRASEAL® XP features XP technology, the latest innovation in active waterproofing. This advanced polymer technology provides exceptional performance in a wide-range of ground contaminates including high-saline conditions. Unlike passive membranes when used alone, the self-sealing ability of the active XP technology enables the ULTRASEAL® XP waterproofing membrane to seal minor cuts or damage to the membrane. And most importantly, it has been proven effective in both hydrostatic and non-hydrostatic conditions. ULTRASEAL® XP can be installed directly to green concrete and in extreme temperatures, thus providing greater flexibility to the construction schedule. The durable membrane can also withstand pedestrian construction traffic and inclement weather.

VOLCLAY GRANULES - GRANULAR SODIUM BENTONITE

VOLCLAY GRANULES are chemically treated, granular sodium bentonite used as a detailing accessory product for CETCO Waterproofing Systems. When wetted, VOLCLAY GRANULES form into a dense, low permeable paste material that combines with the sodium bentonite in the waterproofing products to form a seamless waterproofing membrane. VOLCLAY GRANULES are used to fill cavities and voids in the substrate prior to installing the main bentonite waterproofing course. It is also used to seal around slab penetrations to form a continuous waterproofing system. A fillet of VOLCLAY GRANULES can be poured at the footing/wall junction to provide additional waterproofing protection. VOLCLAY GRANULES are not an expansion joint sealant.

VOLSEAL® 200 - CEMENTITIOUS WATERPROOFING BY CRYSTALLIZATION

VOLSEAL 200 is a single component, surface applied material, which waterproofs and protects concrete in-depth. It consists of grey Portland cement, specially treated quartz sand and a compound of active chemicals. VOLSEAL 200 is supplied in powder form in 25kg tubs, and needs only to be mixed with clean water prior to application.

VOLSEAL® 250 - CEMENTITIOUS FLEXIBLE WATERPROOFING COATING

VOLSEAL 250 is a highly elastic waterproof coating consisting of aggregates, cementbased binders and acrylic polymers. Once cured, it forms an an impervious and elastomeric barrier with crack-bridging properties of up to 0.8 mm in width. VOLSEAL 250 has excellent adhesion properties to concrete, masonry block and brickwork, and can be applied to green concrete.

VOLTEX® & VOLTEX DS® - BENTONITE GEOTEXTILE WATERPROOFING SYSTEM

VOLTEX® is a highly effective waterproofing composite comprised of two polypropylene geotextiles and sodium bentonite. The two geotextiles are interlocked by a patented needlepunching process which encapsulates and confines the bentonite. VOLTEX DS® integrates a polymer liner bonded to the outside surface of the nonwoven geotextile. The polymer liner provides extremely low permeabilities for water vapour transmission. Installation of VOLTEX® is fast and easy. Simply position the product into place and fasten. VOLTEX® can be installed on green concrete, in virtually any weather, without the need for primers or adhesives. VOLTEX® can be easily cut on site to form around corners and penetrations. The result is always a consistent self-sealing membrane.

VOLTEX® - BENTONITE GEOTEXTILE WATERPROOFING SYSTEM

VOLTEX® is a highly effective waterproofing composite of high strength geotextiles and 4.8 kg/sqm of sodium bentonite. The high swelling, low permeable sodium bentonite is encapsulated between a non-woven and woven geotextile. A proprietary needlepunch process interlocks the geotextiles together forming an extremely strong composite that maintains the equal coverage of bentonite, as well as, protects it from inclement weather and construction related damage. Once backfilled, VOLTEX® hydrates and forms a monolithic waterproofing membrane. VOLTEX® contains zero VOC, can be installed in almost any weather condition to green concrete, and most importantly, has proven effective on both new and remedial waterproofing projects worldwide.

WATERSTOP XP - EXPANDING WATERSTOP WITH XP TECHNOLOGY FOR CONCRETE CONSTRUCTION JOINTS

WATERSTOP® XP is an active polymer stripwaterstop featuring XP technology that hasbeen proven effective in a wide range of contaminatedenvironments. The active polymerof WATERSTOP® XP is engineered to providea consistent positive seal against concretesurfaces in fresh and high-saline ground waterconditions. WATERSTOP® XP is effectivein both continuous and intermittent hydrostaticconditions.The expansion and pliability of WATERSTOP® XP also provides effective crack-sealingand void-filling capacity.

WATERSTOP-RX® - EXPANDING CONCRETE JOINT WATERSTOP

WATERSTOP-RX® is a hydrophilic strip waterstop designed to stop water infiltration through cast-in-place concrete construction joints by expanding upon contact with water to form a positive seal against the concrete. The key to WATERSTOP-RX®s effectiveness is its superior expansion to seal and fill voids and cracks in the concrete. WATERSTOP-RX® is an active waterstop that is designed to replace passive PVC/Rubber dumbbell waterstops, thereby eliminating the requirement of special pieces, split forming and seam welding. WATERSTOP-RX® has been successfully tested by independent testing firms to over 60 meters of hydrostatic water pressure, under both continuous immersion and wet/dry cycling.

WATERSTOP-RX® - EXPANDING WATERSTOPS FOR CONCRETE CONSTRUCTION JOINTS

WATERSTOP-RX® is an expanding strip waterstop designed to stop water ingress through cast-in-place concrete construction joints. Upon contact with water, it expands to form a positive seal against the concrete. WATERSTOP-RX® is designed to replace passive PVC/rubber dumbbell waterstops, thereby eliminating the requirement of special pieces, split-forming and seam welding. WATERSTOP-RX® offers a low-cost opportunity to enhance the performance of a sound external waterproofing system by sealing the areas experiencing the highest probability of water infiltration through the concrete, and should therefore be implemented as part of the waterproofing design.

WATERSTOP® XP - EXPANDING WATERSTOP WITH XP TECHNOLOGY FOR CONCRETE CONSTRUCTION JOINTS

WATERSTOP® XP is the next generation of waterstop that expands upon contact with water to form a positive seal to stop water ingress through cast-in-place concrete construction joints and around pipe penetrations. Through the use of the patented XP technology, WATERSTOP® XP is proven effective in a wide range of contamination environments, including high-saline conditions. Its flexible design also makes it effective for both horizontal and vertical joints. WATERSTOP® XP is manufactured in lightweight, flexible coils and designed to replace passive PVC/rubber dumbbell waterstops eliminating the requirement of special pieces, split-forming and seam welding.

Showing 1-25 of 25