NBS Source
I'm a manufacturer

Compare variants

Zucchini MV Transformers
Zucchini MV Transformers
Zucchini MV Transformers

Verified 5 days ago

Legrand Electric Ltd

Verified 5 days ago

Legrand Electric Ltd

Verified 5 days ago

Legrand Electric Ltd
Summary
High efficiency transformers.
-
-
Application

Suitable for high-voltage dry-type transformer applications.

-
-
Description

A range of high efficiency transformers.

The Legrand Green T.HE transformers fully comply with the new eco-compatible design rules and guarantee a significant reduction in energy consumption, thus promoting significant economic savings and the reduction of CO2 emissions into the atmosphere.

Partial discharges are microscopic phenomena occurring inside insulating resin cavities and are a factor in the speeding up of the ageing process of a transformer. Therefore, it is important that the values of such currents are limited. According to the product standard regarding the design of resin transformers (IEC 60076-11), all windings with a voltage of ≥ 3.6 kV are subject to the measure of partial discharges and the value measured should not exceed 10 pC (picocoulomb). When the Green T.HE transformers were subjected to the measurement of partial discharges, the values detected were always below 5 pC, significantly better than required by the standard.

A low value of partial discharges represents the index of some positive factors, such as:

  • proper and solid design criteria.
  • quality raw materials.
  • precision during conductor foil winding phases.
  • competence during the epoxy resin pouring around the high-voltage winding.
  • accuracy in final assembling of the complete assembly.

It is clearly evident that a lower level of partial discharge leads to a higher resistance to work stresses and consequently to a higher life expectancy of the transformer under examination.

Features and benefits:

  • Confirming to IEC 60076-11 and EU regulation 548/2014.
  • HV (high voltage) and LV (low voltage) terminals have been modified and built to facilitate the connection of the product on both windings.
  • The HV windings are all made in BIL LIST 2, thanks to the reinforced insulation in the critical points of the unit.
  • They guarantee very high performance and reduced losses compared to previous models, while maintaining equivalent weights and dimensions. All this is possible thanks to the completely new magnetic core with newly developed and high-performance material.
  • New magnetic core.
  • Reinforced insulation.
  • Higher performance with low weights and dimensions.

-
-
Color
Green
-
-
Material
Epoxy resin
-
-
Shape
Circle
-
-
Length
1150 mm, 1200 mm, 1300 mm, 1350 mm, 1450 mm, 1550 mm, 1600 mm, 1700 mm, 1750 mm, 1850 mm, 2000 mm, 2200 mm
-
-
Width
750 mm, 780 mm, 850 mm, 1000 mm, 1500 mm
-
-
Height
1290 mm, 1310 mm, 1370 mm, 1430 mm, 1490 mm, 1540 mm, 1600 mm, 1440 mm, 1960 mm, 1980 mm, 2130 mm, 2150 mm, 2240 mm, 2310 mm, 2400 mm
-
-
Warranty description
Two year
-
-
SKU Code
z
-
-

Specification

Classification data
Standard
To BS EN 50708-2-1, IEC 60076-11.
-
-
Rated apparent power
100 kVA.
-
-
Core material
Vacuum-cast resin.
-
-
Cooling medium
Air (A).
-
-
Temperature class
High-voltage (HV) and low-voltage (LV) windings, to Class F.
-
-
Climatic class
Class C2.
-
-
Environmental classification
Class E3.
-
-
Fire behaviour class
To BS EN IEC 60076-11, Class F1.
-
-
Highest voltage for equipment windings (Um)
24 kV.
-
-
Rated frequency
50 Hz.
-
-
Number of phases
Three.
-
-
Rated primary voltage (Uprim)
11000 V.
-
-
Rated secondary voltage (Usec)
417 V at no-load.
-
-
Vector group
To BS EN 60076-1, Dyn11.
-
-
Sound pressure level (maximum)
51 dB (A).
-
-
Indicators and alarms
-
-
-
Thermal protection
Low-voltage (LV) winding temperature sensors (one per each winding).
-
-
Enclosure
-
-
-
Ingress protection (minimum)
IP23., IP31.
-
-
Colour
Green.
-
-
High-voltage connection arrangement
Top cable entry.
-
-
Low-voltage connection arrangement
Top cable entry.
-
-
Accessories
Cupal plates., Enclosure., Rubber supports (anti-vibration)., Surge arrester kit, Temperature control device., Temperature measurement sensor., Ventilation fan.
-
-

Additional properties

Series
Ao--10%Ak.
-
-

Sustainability data

Material
Epoxy resin
-
-