Suitable for use on pitched slated or tiled roofs with a minimum pitch of 30 degrees, either at the ridge or on the slope of the roof, in new constructions.
Suitable for use on pitched slated or tiled roofs with a minimum pitch of 30 degrees, either at the ridge or on the slope of the roof, in new constructions.
SmartStack GRP Chimney consists of a GRP chimney stack including a base plinth, flaunching with ventilation, chimney pot, side gutters, expanding foam strip and lead apron flashing, for use on roof ridges and slopes. The chimney is available in one and two pot versions, and in three brick colours (buff, standard red and burnt red) and two render colours (white and cream). The brick and render colours can be colour-matched to the bricks/render of the building.
The chimney core, base plinth, flaunching and chimney pot(s) are moulded from GRP and bonded with GRP laminates. The internal structural framework, fittings and ventilation strips are then installed within the chimney, cut and bonded to the chimney core. The lead apron flashings are fitted, and expanding foam strip is fixed to the predrilled gutter flanges. Finally, the lifting eye is installed and the GRP pot(s), with an internal screwed fixing adaptor, is packed loose with the chimney.
Smartstack is an all in one solution that cuts the cost of labour and materials.
Features and benefits:
SmartStack GRP Chimney consists of a GRP chimney stack including a base plinth, flaunching with ventilation, chimney pot, side gutters, expanding foam strip and lead apron flashing, for use on roof ridges and slopes. The chimney is available in one and two pot versions, and in three brick colours (buff, standard red and burnt red) and two render colours (white and cream). The brick and render colours can be colour-matched to the bricks/render of the building.
The chimney core, base plinth, flaunching and chimney pot(s) are moulded from GRP and bonded with GRP laminates. The internal structural framework, fittings and ventilation strips are then installed within the chimney, cut and bonded to the chimney core. The lead apron flashings are fitted, and expanding foam strip is fixed to the predrilled gutter flanges. Finally, the lifting eye is installed and the GRP pot(s), with an internal screwed fixing adaptor, is packed loose with the chimney.
Smartstack is an all in one solution that cuts the cost of labour and materials.
Features and benefits: