• Applications include showers or wet rooms, areas with private and commercial use indoors, with direct contact with process and cleaning water.
• The base must be sufficiently load bearing and even.

The bench is delivered in four parts: Bench element, substructure element and two BA 6 (as the cover plate or compensating panels).

wedi Sanoasa benches are pre-fabricated and suitable for individual tiling. Custom designs are also available upon request - consult manufacturer for information.

Sanoasa bench 1 - Straight:

Bench with a right-angled front edge to the seating element. If this seating is combined with the straight edge of the substructure element, the result is an easy to tile and level front edge. As a design variant, the seating area can also be easily fitted so that it protrudes. The Fundo Riolito Discreto wall drain can be integrated into the support element. Rotating the support element provides further design options.

Sanoasa bench 2 - Angled:

Distinguished by an angled front edge on the seat, resulting in a flush transition to the equally angled support element. This bench variant also enables further design options when rotating the support element.

Sanoasa bench 3 - Rounded:

The front edge is rounded off so that there is a flush transition with both the angled and the vertical sides of the support element.

Features and benefits:

• Watertight.
• Stable.
• Lightweight.
• 100% waterproof extruded polystyrene insulation (XPS) core.
• Available in the widths 900 and 1200 mm.
• Three different edge finishes to choose from.
• Width and depth can be shortened.
• Can be combined with the attachment element Fundo Riolito Discreto.
• CO²-foamed, extruded polystyrene rigid foam with closed cell structure and flame-retardant additive.
• The polystyrene rigid foam is hydrochlorofluorocarbon (HCFC) and chlorofluorocarbon (CFC) free.
• wedi 610 is required for adhesion.
• Joint reinforcement tape is required at the wall connections.