Designed to protect the edges of ceramic tiles or similar hard finishes fitted in wall or floor installations.

1. Select ERA according to tile thickness. 
2. Trowel tile adhesive over the area that forms the perimeter of the tiled covering. 
3. Press the perforated anchoring leg of the ERA into the tile adhesive and align, mechanical fix if required 
4. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage. 
5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approximately 1 mm lower. 
6. Fill the joint completely with grout. 

Designed to protect the edges of ceramic tiles or similar hard finishes fitted in wall or floor installations.

1. Select ERA according to tile thickness. 
2. Trowel tile adhesive over the area that forms the perimeter of the tiled covering. 
3. Press the perforated anchoring leg of the ERA into the tile adhesive and align, mechanical fix if required 
4. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage. 
5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approximately 1 mm lower. 
6. Fill the joint completely with grout. 

Designed to protect the edges of ceramic tiles or similar hard finishes fitted in wall or floor installations.

1. Select ERA according to tile thickness. 
2. Trowel tile adhesive over the area that forms the perimeter of the tiled covering. 
3. Press the perforated anchoring leg of the ERA into the tile adhesive and align, mechanical fix if required 
4. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage. 
5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approximately 1 mm lower. 
6. Fill the joint completely with grout. 

An extruded aluminium profile with semi-round edges designed to protect the edges of ceramic tiles or similar hard finishes fitted in wall or floor installations.

In choosing aluminium as a finishing profile the suitability of its installation must be determined if chemical or mechanical stresses are anticipated. Three way corner pieces are also available to solve the problem of mitres that can often be sharp or unsightly. Available in four sizes.

An extruded aluminium profile with semi-round edges designed to protect the edges of ceramic tiles or similar hard finishes fitted in wall or floor installations.

In choosing aluminium as a finishing profile the suitability of its installation must be determined if chemical or mechanical stresses are anticipated. Three way corner pieces are also available to solve the problem of mitres that can often be sharp or unsightly. Available in four sizes.

An extruded aluminium profile with semi-round edges designed to protect the edges of ceramic tiles or similar hard finishes fitted in wall or floor installations.

In choosing aluminium as a finishing profile the suitability of its installation must be determined if chemical or mechanical stresses are anticipated. Three way corner pieces are also available to solve the problem of mitres that can often be sharp or unsightly. Available in four sizes.