Bracket angle support suitable for use in supporting masonry systems to concrete frames and steel frames over 9 m in height. Designed to suit cavities greater than 40 mm.

Masonry support bracket system comprising of a continuous thin angle support complete with welded brackets incorporating a serrated slot and adjustment washer. The unit allows for adjustment in all three planes. Casting WC38 cast-in channels into the edge of the slab provides almost unlimited horizontal adjustment, while the Wincro serrated slot fixing gives vertical adjustment of ± 26 mm. Lateral adjustment is provided by the use of stainless steel packing shims between the system and structure.

Type:

• WSC/T: Standard arrangement using cast in channel to slab edge.
• WSC/E: Standard arrangement using site drilled expansion bolts.
• WSC/R: Standard arrangement using site drilled resin anchor bolts.
• WSC/S: Standard arrangement using isolated bolts to structural steelwork.
• WSC/BB: Standard arrangement using isolated bolts to RHS structural frames.
• WSC/-/IA: Inverted angle welded to brackets to suit coursing.
• WSC/-/IIA: Fully inverted system to suit coursing.
• WSC/-/P: Designed with the bracket projecting below the structure.
• WSC/-/TF: Designed for higher loading conditions, fixed directly to the top of the structure.

Features and benefits:

• Systems can be adapted to suit special masonry details including the support of soffit brickwork or atypical coursing positions.
• Drawings are provided showing the location of fixings and all bracket angle units are fully referenced and scheduled.
• Angles can also be supplied curved on plan to suit radiused masonry.
• Manufactured from corrosion resistant stainless steel.
• Other variations/ configurations available, consult manufacturer for details.
• All details are submitted for approval before manufacture.
• CE marked to BS EN 1090-1.
• Designs to Eurocode 3.