CT1 is used by trades people in every sector of the construction and maintenance industries including roofing contractors, joiners, window suppliers, kitchen fitters, bathroom installers, as well as specialist fit out and building companies:

• For all applications, including construction, engineering, food preparation areas, roofing, building repair and maintenance, installation, marine environments and clean rooms.
• Versatile sealant for use in commercial and domestic applications.
• Application temperature range: 5°C to 35°C
• Service temperature range: -40°C to 120°C
• Suitable for internal or external applications** (CT1 Colours).
• Formulated to seal joints where a strong bond and movement accommodation is required.
• CT1 works on natural stone, polyester, polystyrene foam, brick, concrete, tile, glass, wet surfaces and underwater.
• Anti-Pick** (suitable for use in prisons and hospitals) - Shore A - 60 ±5 (DIN 53505).
• Can also be painted with most common water-based paints (not suitable with alkyd/oil-based paints)**. For best results, prior testing is recommended.
• For use in expansion/structural joints (Class 20HM - ISO11600)
• For bonding and sealing of guttering**.
• For application advice on powder-coated substrates contact the powder-coating manufacturer.

How is CT1 Supplied?

CT1 is supplied in a 290ml cartridge.

Now available in Eco Complaint Cartridges that are made from 80% recycled plastic and are 100% recyclable after use.

How to prepare CT1 for use!

To prepare your CT1 for application, you need to;

• Remove the nozzle at the top of the cartridge and cut the cap off (at the top of the threaded section) using a sharp utility knife.
• Cut the nozzle to the correct size using a sharp utility knife. This will determine the size of your bead. Make sure to do it at a 45-degree angle.

How to apply CT1 sealant and adhesive!

With the CT1 cartridge open and the nozzle cut to suit the bead of sealant needed applying CT1 sealant and adhesive is very straightforward.

Simply;

• Load the prepared cartridge into your caulking gun securely.
• Squeeze down on the trigger to start applying CT1.
• Apply CT1 sealant evenly in a straight line, using consistent pressure to the trigger as you drag the nozzle along your desired application area.

Once you’ve applied your bead of CT1 along your desired area, use C-TEC Multisolve to lightly coat the sealant and lubricate its surface to assist tooling without impacting the adhesive bond press on the materials.

How long does it take to cure?

Curing times at 23°C / RH50%.

CT1 works instantly and is fully cured in:

• 24 hours – 3mm bead
• 48 hours – 6mm bead
• 72 hours – 9mm bead

Depending on how heavy the application of sealant, full curing times may be extended.

At low temperatures curing times will be extended.

* Depending on Substrates

** CT1 Colours / Does not apply to CT1 Clear or CT1 Silver

*** CT1 Colours / Does not apply to CT1 Clear or CT1 Silver.

CT1 is used by trades people in every sector of the construction and maintenance industries including roofing contractors, joiners, window suppliers, kitchen fitters, bathroom installers, as well as specialist fit out and building companies:

• For all applications, including construction, engineering, food preparation areas, roofing, building repair and maintenance, installation, marine environments and clean rooms.
• Versatile sealant for use in commercial and domestic applications.
• Application temperature range: 5°C to 35°C
• Service temperature range: -40°C to 120°C
• Suitable for internal or external applications** (CT1 Colours).
• Formulated to seal joints where a strong bond and movement accommodation is required.
• CT1 works on natural stone, polyester, polystyrene foam, brick, concrete, tile, glass, wet surfaces and underwater.
• Anti-Pick** (suitable for use in prisons and hospitals) - Shore A - 60 ±5 (DIN 53505).
• Can also be painted with most common water-based paints (not suitable with alkyd/oil-based paints)**. For best results, prior testing is recommended.
• For use in expansion/structural joints (Class 20HM - ISO11600)
• For bonding and sealing of guttering**.
• For application advice on powder-coated substrates contact the powder-coating manufacturer.

How is CT1 Supplied?

CT1 is supplied in a 290ml cartridge.

Now available in Eco Complaint Cartridges that are made from 80% recycled plastic and are 100% recyclable after use.

How to prepare CT1 for use!

To prepare your CT1 for application, you need to;

• Remove the nozzle at the top of the cartridge and cut the cap off (at the top of the threaded section) using a sharp utility knife.
• Cut the nozzle to the correct size using a sharp utility knife. This will determine the size of your bead. Make sure to do it at a 45-degree angle.

How to apply CT1 sealant and adhesive!

With the CT1 cartridge open and the nozzle cut to suit the bead of sealant needed applying CT1 sealant and adhesive is very straightforward.

Simply;

• Load the prepared cartridge into your caulking gun securely.
• Squeeze down on the trigger to start applying CT1.
• Apply CT1 sealant evenly in a straight line, using consistent pressure to the trigger as you drag the nozzle along your desired application area.

Once you’ve applied your bead of CT1 along your desired area, use C-TEC Multisolve to lightly coat the sealant and lubricate its surface to assist tooling without impacting the adhesive bond press on the materials.

How long does it take to cure?

Curing times at 23°C / RH50%.

CT1 works instantly and is fully cured in:

• 24 hours – 3mm bead
• 48 hours – 6mm bead
• 72 hours – 9mm bead

Depending on how heavy the application of sealant, full curing times may be extended.

At low temperatures curing times will be extended.

* Depending on Substrates

** CT1 Colours / Does not apply to CT1 Clear or CT1 Silver

*** CT1 Colours / Does not apply to CT1 Clear or CT1 Silver.

CT1 is a unique TRIBRID® polymer sealant and adhesive

Made in Britain with British technology and British design.

In tests carried out under BS EN ISO 8339:2005, CT1 achieved amazing adhesion on virtually any material in most applications without the need for additional mechanical fixings.

Furthermore it is up to 360% stronger with 250% more elongation than a traditional Hybrid Polymer* - View CT1 Video

CT1 is supplied in cartridges made with 80% PCR recycled packaging, reducing single use plastic and landfill waste.

As a universal sealant and adhesive CT1 replaces:

• Wood and P.U. adhesives.
• Silicone sealants.
• Sanitary silicone sealants.
• Acrylic sealants.
• Butyl rubber sealants.

CT1 bonds to:

• All metals (including lead).
• Glass.
• Mirrors.
• All woods.
• MDF.
• Polystyrene.
• Fibreglass & GRP.
• Tiles.
• Concrete.
• Most stones.
• Most synthetic materials.
• Plastics (excluding PP, PE and PTFE).

CT1 Colours can be used internally and externally:

• White.
• Grey.
• Black.
• Beige.
• Brown.
• Oak.
• Green.
• Anthracite.

CT1 Clear and Silver are used predominantly on internal applications, not in direct sunlight.

Features and benefits:

• High tensile strength up to 3.07N/mm2* / 31kg/cm²*.
• Class 20HM (ISO11600)
• Ten Colours.
• Low Modulus.
• Solvent and Isocyanate free.
• Neutral Curing.
• Environmentally and Ecologically Compliant Sealant and Adhesive.
• REACH Regulation Compliant.
• GEV EMICODE - EC1 Plus Certified - Lowest Possible Emissions.
• A+ Indoor Air Comfort GOLD®.
• Compliant with BREEAM, LEED, WELL.
• ISEGA Food Preparation Safe Certificate.
• ETAG 022 Approved
• ISO9001:2015
• ISO14001:2015
• ISO45001:2018
• UKCA Mark
• CE Mark
• Good chemical resistance to water, seawater, aliphatic solvents, oils, greases and diluted organic acids.
• Moderate chemical resistance to esters, ketones, aromatics, chlorine for swimming pools and chlorinated solvents.
• Non-toxic.
• Odourless.
• Shore A - 60 ±5 (DIN 53505)**
• Anti Pick** - Colours (suitable for use in prisons and hospitals).
• Use internally or externally*** (CT1 Colours).
• Works in dry or wet conditions (even under water).
• Excellent colour retention – Suitable for use where long term visual appearance is to be maintained.
• Fungal and mould resistant.
• Vibration resistant.
• Highly elastic - Does not shrink or crack.
• Can be painted over*** (with water-based paints and primers).

* Depending on Substrates

** CT1 Colours / Does not apply to CT1 Clear or CT1 Silver

*** CT1 Colours / Does not apply to CT1 Clear or CT1 Silver.

CT1 is a unique TRIBRID® polymer sealant and adhesive

Made in Britain with British technology and British design.

In tests carried out under BS EN ISO 8339:2005, CT1 achieved amazing adhesion on virtually any material in most applications without the need for additional mechanical fixings.

Furthermore it is up to 360% stronger with 250% more elongation than a traditional Hybrid Polymer* - View CT1 Video

CT1 is supplied in cartridges made with 80% PCR recycled packaging, reducing single use plastic and landfill waste.

As a universal sealant and adhesive CT1 replaces:

• Wood and P.U. adhesives.
• Silicone sealants.
• Sanitary silicone sealants.
• Acrylic sealants.
• Butyl rubber sealants.

CT1 bonds to:

• All metals (including lead).
• Glass.
• Mirrors.
• All woods.
• MDF.
• Polystyrene.
• Fibreglass & GRP.
• Tiles.
• Concrete.
• Most stones.
• Most synthetic materials.
• Plastics (excluding PP, PE and PTFE).

CT1 Colours can be used internally and externally:

• White.
• Grey.
• Black.
• Beige.
• Brown.
• Oak.
• Green.
• Anthracite.

CT1 Clear and Silver are used predominantly on internal applications, not in direct sunlight.

Features and benefits:

• High tensile strength up to 3.07N/mm2* / 31kg/cm²*.
• Class 20HM (ISO11600)
• Ten Colours.
• Low Modulus.
• Solvent and Isocyanate free.
• Neutral Curing.
• Environmentally and Ecologically Compliant Sealant and Adhesive.
• REACH Regulation Compliant.
• GEV EMICODE - EC1 Plus Certified - Lowest Possible Emissions.
• A+ Indoor Air Comfort GOLD®.
• Compliant with BREEAM, LEED, WELL.
• ISEGA Food Preparation Safe Certificate.
• ETAG 022 Approved
• ISO9001:2015
• ISO14001:2015
• ISO45001:2018
• UKCA Mark
• CE Mark
• Good chemical resistance to water, seawater, aliphatic solvents, oils, greases and diluted organic acids.
• Moderate chemical resistance to esters, ketones, aromatics, chlorine for swimming pools and chlorinated solvents.
• Non-toxic.
• Odourless.
• Shore A - 60 ±5 (DIN 53505)**
• Anti Pick** - Colours (suitable for use in prisons and hospitals).
• Use internally or externally*** (CT1 Colours).
• Works in dry or wet conditions (even under water).
• Excellent colour retention – Suitable for use where long term visual appearance is to be maintained.
• Fungal and mould resistant.
• Vibration resistant.
• Highly elastic - Does not shrink or crack.
• Can be painted over*** (with water-based paints and primers).

* Depending on Substrates

** CT1 Colours / Does not apply to CT1 Clear or CT1 Silver

*** CT1 Colours / Does not apply to CT1 Clear or CT1 Silver.