Designed to generate safe steam humidification for duct or in-room, in applications where the priority is hygiene, such as research laboratories or the agriculture and food industry.

Resistive elements humidifiers designed to generate safe steam humidification for duct or in-room. Reliable and precise technology for high-tech applications. Steam production is modulated with the highest precision, using any feedwater.

The features of steam humidification make this technique the preferred solution in applications where the priority is hygiene, such as research laboratories or the agriculture and food industry: steam is in fact completely aseptic and does not carry solid particles, an intrinsic quality that is assured without needing to treat the feedwater.

Features and benefits:

• Exceptional relative humidity control performance (±1%).
• A functional solution that is independent of feedwater characteristics.
• Service continuity.
• Integrated protection against overheating.
• Modulating limit probe prevents condensate formation without abrupt interruptions in steam production.
• Solid state relays, managed by the PWM system with built-in humidity or temperature controller (High precision)
• c.pHC electronic controller has been designed and developed by CAREL
• Using the function “mirror” for Process or ""endurance"" for Titanium, the heaterSteam unit can extend its capacity by managing up to 19 secondary units.

Control features:

• Continuous modulation (with SSR): from 0 to 100%.
• Integrated control (probes not included): for RH or temperature
• External proportional signal (standard).
• Limit probe supported (standard)
• Remote ON/OFF (standard)
• Alarm relay (standard)
• Type of signal (probe or external controller): 0 to 10 V; 0 to 1 V; 2 to 10 V; 0 to 20 mA; 4 to 20 mA
• RS485 interface (standard)

Features common to both models:

• Automatic thermal shock.
• BACnet™, Modbus® and CAREL protocols.
• USB port.
• tERA ready.
• Preheating for rapid production.
• Anti-Foaming system (AFS).
• Start-up wizard.
• 4.3” touchscreen display or LCD with 6 buttons.

Process model:

A modular and flexible solution that represents the basis of the electric heater humidifier range, Incoloy® 825 heating elements allow operation in complex conditions, even when feedwater quality is not controlled. As per common features above plus:

• Incoloy® 825 heaters.
• Master/ slave function "Mirror".

Titanium model:

The pinnacle of this family of cutting-edge humidifiers. The unit can operate on any type of treated water, even extremely aggressive water with a conductivity below 1 μS/cm and softened down to 0°fH. (the titanium heating elements are completely resistant to corrosion). As per common features above plus:

• Titanium heaters.
• Master/ slave “endurance” function with redundancy and rotation.
• Wireless sensor reception.
• Built-in web server.
• Thermally insulated cylinder.
• Kevlar scale removal sack (for small units up to 13 kg/h).

Certifications:

CE, ETL (UL998), TÜV and EAC.