NBS Source

Qatar Airport uses Sherwin-Williams Terrazzo flooring

by Sherwin-Williams

The challenge of installing one of the largest expanses of flooring in a single project – and one of the most complex – faced the hub where east meets west at Hamad International Airport in Doha, Qatar. The airport is described as ‘the gateway to Qatar’ and the hub for its world-class airline Qatar Airways with the capacity to serve 8,700 passengers per hour and 30 million every year. Specifiers wanted a flooring high in aesthetic and environmental credentials to meet all requirements at this important airport zone and meeting all relevant environmental and health and safety regulations.  

System

The system chosen was epoxy terrazzo flooring supplied by Sherwin-Williams - 140,000 sq metres of pigmented epoxy resin - involving the shipping of pre-mixed marble aggregates from Italy to complete the design for the main floor areas consisting of three colours, primarily dark grey with pure black or white epoxy terrazzo.

The epoxy terrazzo was poured in situ as the 16,000 workers from various countries navigated their way around the 5,500-acre site and ground and polished the flooring to a high finish, bringing with it major environmental benefits. Thin set epoxy conforms to the EU’s solvents and Volatile Organic Compounds Emissions Directive.

The installation process itself also meant there was very little waste – the terrazzo prepared for installation was measured accurately to allow as much or as little to be used in application.

The epoxy terrazzo is high in aesthetic and environmental features and meets the demands of architects and specifiers for longer-lasting products with ever-greater green credentials.

Terrazzo flooring is a composite – a mix of resin with aggregates which give the product such variety in its design. Intended to be a durable, hard-wearing and highly decorative flooring solution, the resin

With simple re-polishing or re-sealing using water-based products a typical terrazzo flooring can last up to 40 years. However, vinyl floor sheets would require replacing typically every 12 years or less.

The Sherwin-Williams Difference 

By putting our customers first, we know that the innovation, imagination, research and development we put into each and every product will be worth it. You are at the centre of our thinking wherever we operate around the world across five continents whether it is advice, specification or on-site inspection. You are the reason we exist. This is the Sherwin-Williams difference.

Products featured in this case study

View all products (40)
Resin Flooring System Resuflor Terrazzo

Resin Flooring System Resuflor Terrazzo

More case studies from Sherwin-Williams

View all case studies(27)
The Copperworks in Leeds required a floor refurbishment over some 30000 square metres - Sherwin-Williams Resucoat HB product provided the solution.

The Copperworks in Leeds required a floor refurbishment over some 30000 square metres - Sherwin-Williams Resucoat HB product provided the solution.

Decorative and seamless flooring supplied for atrium area to Radclyffe School

Decorative and seamless flooring supplied for atrium area to Radclyffe School

Morrisons hot cross bun bakery gets long lasting flooring solution

Morrisons hot cross bun bakery gets long lasting flooring solution

Bright UV stable floor coating installed at Duxford Air Museum to show off aviation exhibits at their very best

Bright UV stable floor coating installed at Duxford Air Museum to show off aviation exhibits at their very best