The door set to be formed from non-thermal aluminium extruded box section and to include a frame consisting of two jambs (100mm x 45mm profiles) and a 125mm x 100mm integral transom bar with a 7mm reinforced face. The frame to fit within the structural opening with the doors sliding over a glazed screen and/or solid wall. The fixed glazed screens are secured within the frame structure by two concealed aluminium channels.

Glass is secured using appropriate beads & gaskets. The aluminium profiles will accept various glazing options, including integral blinds and switchable glass.

Formed from various 100mm x 45mm and 47mm aluminium profiles to BS EN 12020-2:2022. The door to be prepared with a concealed bottom channel to operate with a floor mounted nylon guide.

The door to employ a "low friction" recirculating bearing system sliding in an aluminium track with anti-derailing feature and interchange section. Door carriers to be stainless steel and "damper" mechanisms (not self or soft closing) to be active when the door is at the closed and fully open positions. The pelmet will conceal the track and have a "hold open" lid for ease of maintenance.

Durability – Externally tested for Axis to 1,000,000 cycles exceeding the requirements of BS EN1527:2019.

Sustainability – EPD verified to EN 15804:2019.

BREG EN EPD 000630 - FM B100 & B01