K Rend Silicone FT is a water repellent, cement based and polymer modified self-coloured render system. It incorporates silicone technology in a through coloured render and provides a fine textured finish.

System includes:

A range of polymer modified basecoats for use as a backing for K Rend Silicone FT finish.

- Basecoats:

K Rend HP12 Base:

A “high polymer” basecoat for enhanced performance on difficult substrates. It is used over dense concrete or brickwork (with the use of R7 Acrylic Primer) as a primary coat for K Rend finishes. K Rend HP12 Base is Kitemarked to BS EN 998-1 and is IAB approved.

K Rend HPX Base:

A “high polymer” basecoat for ultra high performance onto unusual substrates which require greater flexibility and adhesion. It is used over lightweight blockwork (with alkali resistant reinforcing mesh incorporated) or brickwork (with the use of R7 Acrylic Primer) as a primary coat for K Rend finishes. K Rend HPX Base is Kitemarked to BS EN 998-1 and is IAB approved.

K Rend Standard UF Base:

A high quality, general purpose sprayable basecoat with excellent workability. It is used over 7 Newton, medium density concrete block as a primary coat for K Rend finishes. K Rend Standard UF Base is Kitemarked to BS EN 998-1 and is IAB approved.

K Rend UF Fibre Base:

A high quality, general purpose sprayable basecoat with excellent workability and increased impact resistance and tensile strength. It is used over 7 Newton, medium density concrete block as a primary coat for K Rend finishes. K Rend UF Fibre Base is Kitemarked to BS EN 998-1.

- Final coat:

K Rend Silicone FT:

A water repellent, self coloured render for hand application to provide a fine textured finish. It may be used as a one-coat finish over block-work, applied a minimum 16 mm finished thickness in two passes, and scraped to produce a uniform texture. It is also designed to be used over K Rend basecoats as part of a two coat system. Silicone FT is Kitemarked to BS EN 998-1 and is BBA and IAB approved.

97/3428