"water"
6,744 results found
Relevance
Showing 433-468 of 546
Fosroc Solutions for Waterstops
Fosroc International Limited
Every sizeable concrete retaining wall, basement slab, reservoir tank, length of tunnel must
have joints. These may be a mixture of construction or expansion joints but all such joints in direct contact with water need the protection of a waterstop.
This brochure the importance of PVC and hydrophilic waterstops in the construction of watertight structures.
Superglass Superwhite 42 Blown Wool - Datasheet
Superglass Insulation Ltd
Superglass Superwhite 42 is a glass mineral wool blown loft insulation with a water repellent additive to enhance it resistance to moisture. Installed by professional insulation contractors.
Superglass Superwhite 42 is designed specifically to provide thermal insulation in new or existing loft/cold roof spaces of up to 500mm.
Newton HydroTank 315 Waterbar
Newton Waterproofing Systems
HydroTank 315 Waterbar is a hydrophilic, acrylate polymer waterbar, which swells when activated by moisture. It is characterised by high elasticity and high tensile strength. HydroTank 315 Waterbar can be used to seal the structure against water leaks to both cast-in-place concrete and precast construction joints.
Instructions - Horne TSV1-3 with auto-divert Thermostatic Shower Panels
Horne Engineering Ltd
Installation, Commissioning, Operation and Maintenance Instructions for Horne surface mounted shower panels with integral (Type 3 and UK Water Regulation 4 Approved) TSV1-3 dual control thermostatic shower valve, plus automatic diverter valve - to fixed shower head, or detachable hose and handset.
Treatment & Anti-Graffiti
Keim Mineral Paints Ltd
The KEIM range of water repellent and dust suppressant products provide a clear surface treatments for all mineral surfaces. Whether it is protecting the substrate from water penetration or to reduce a dusty appearance, KEIM products provide treatments which are highly moisture vapour permeable and long lasting, with minimal effect to the appearance of the surface itself. Once a KEIM mineral paint coating has been applied it may be necessary to further protect the surfaces, particularly from malicious damage namely graffiti. KEIM offers two anti-graffiti materials, both of which can be applied over any of the KEIM mineral paint coatings, offering different surface finishes and life cycles.
PermaRend Scratch Render System (self-coloured, mineral render finished flat or tooled to create ashlar effect)
PermaRock Products Ltd
PermaRend Scratch Render is a scraped finish, self-coloured, mineral render which contains a silicone water repellent which can be finished flat or tooled to create ashlar effect.
Single or multiple coat application to brick or blockwork masonry and onto surfaces treated with a PermaRock / PermaRend reinforced base coat.
Key Features
Suitable for brickwork, blockwork or concrete substrates
Incorporates lightweight reinforcement for additional system durability
Mechanical fixings can be introduced to enhance bond to
the underlying substrate
Allows for the creation of rustification and ashlar effects
20 standard colour shades
Standard / Fine Texture (FT) options
Water repellent properties for enhanced resistance to frost & improved dirt pick-up resistance
BENTOSEAL - TROWEL-GRADE SODIUM BENTONITE MASTIC
CETCO
BENTOSEAL® is trowel-grade, sodium bentonite/butyl-rubber based mastic designed for a variety of surface preparation and waterproof detailing work with select CETCO waterproofing membranes. BENTOSEAL® swells upon contact with water to seal against water intrusion. BENTOSEAL® is easy to apply and bonds to most substrate materials.
BENTOSEAL® is an below-ground waterproofing
accessory product designed for the following uses:
Fillet material at horizontal and vertical inside corners
Flashing material around drains, mechanical
and electrical penetrations, curbs and
parapets
Sealing material at waterproofing terminations below-ground
Repair material for small concrete substrate surface defects prior to waterproofing membrane installation
GEC Anderson Data Sheet - V345 Bowl Urinal
Anderson, GEC Ltd
V345 Bowl Urinal
V345 wall mounted stainless steel bowl urinal. Complete with spreader, grated outlet and plastic water trap for wall outlet. Ø15mm threaded inlet fitting. Concealed fixing at top with screw fixing at base.EN 1.4401 acid resisting grade satin stainless steel.
Inta Tenant Hub
Intatec Ltd
The Inta Tenant Hub is a combination valve
providing a stop valve, pressure reducing valve,
pressure gauge, class D water meter carrier and double check valve in one convenient and easy to fit unit.
The Inta Tenant Hub is provided complete with a whole assembly moulded insulation cover.
TRADECC Leakinject Hyrdrogel 6880 TDS
Newton Waterproofing Systems
A single component polyurethane injection resin that provides a flexible seal in voids and non-structural cracks, or reacts with water to form a flexible, closed-cell foam. The resin is able to seal both pressurised and non-pressurised leaks, whilst its flexibility makes it ideal for applications where movement is expected.
Limelite Canal Grout
Tarmac
Limelite Canal Grout is a high yield bentonite based grout designed for use in canal walls, sealing foundations, tunnels, vaults and manholes from water.
ADVANTAGES
One component mix
Factory blended
Low strength
Good pumping characteristics
Sets to a clay putty consistency
Does not migrate
Deckshield Car Park Decking
Flowcrete – a brand of Tremco CPG UK Ltd
Deckshield car park protection systems have been designed to meet contemporary requirements for upmarket car park environments, helping to enhance visual appearance, improve light reflectivity, reduce noise from tyre squeal and prevent water ingress into any car parking structure. Find out more...
VOLSEAL® 200 - CEMENTITIOUS WATERPROOFING BY CRYSTALLIZATION
CETCO
VOLSEAL 200 is a single component, surface applied material, which waterproofs and protects concrete in-depth. It consists of grey Portland cement, specially treated quartz sand and a compound of active chemicals. VOLSEAL 200 is supplied in powder form in 25kg tubs, and needs only to be mixed with clean water prior to application.
Hempacore AQ (48860) Product Information Sheet
Hempel A/S
Hempacore AQ 48860 is a one-component water-borne,
chlorine free, physically drying intumescent coating for
passive fire protection of structural steel against cellulosic
fires. It is a very low VOC product < 1 g/litre and it is
a CE marked product with European Technical Assessment
ETA 13/1054.
DELTA-TERRAXX Protection and Drainage System for Cellars
Delta Membrane Systems Ltd
Capable of keeping cellars permanently warm and dry, Delta-TERRAXX is an all-round protection and high performance drainage system from Delta Membrane Systems.
This product guarantees universal protection from hydrostatic water pressure, seepage, and artesian water as per DIN 18195 when applied as a second waterproof layer on top of existing cellar waterproof sealing.
It protects perimeter insulation boards from moisture, safeguards insulation performance, and effectively separates the perimeter insulation from the soil.
Delta-TERRAXX has less emissivity and, consequently, enhanced heat transmission resistance due to its silver surface. It can be installed swiftly straight from the roll without additional excavation work thanks to its two-ply structure.
Delta-NP Drain Protection and Drainage System
Delta Membrane Systems Ltd
High drainage capacity through specially-configured dimples is offered by Delta Membrane Systems with its Delta-NP Drain – a compact two-ply composite sheet that keeps its shape perfectly, even under high pressure.
Suitable for vertical and horizontal applications, this product promotes constant water drainage, and offers rot resistance and cost-effective installation.
The dimple part of the sheet gives a high compressive strength of about 150kN/m2, and gives dependable vertical and horizontal drainage in civil engineering applications, retaining walls of all kinds, open tunnels and underground parking lots.
Bonded to the dimpled sheet is a geotextile layer which filters out fine soil particles – ensuring a constant flow of water to the drainage.
Mariner Cubicle Range
Excelsior Panelling Systems Ltd
The Mariner Range is ideal for harsh
environments utilising vandal & water
resistant Compact Solid Grade Laminate.
Multiple hardware options offer greater
design flexibilty. The Mariner range offers
an extended life cycle under normal usage
conditions.
A heavy duty vandal and water
resistant system utilising compact solid
grade laminate suited to applications
where the panelling is at risk from
harsh environmental factors or abuse
by users.
Vandal resistant fittings are provided
in aluminium as standard or stainless
steel to compliment the smooth radius
black core edges.
This range is suitable for use in
humid areas (i.e. Showers, swimming
baths or leisure centres) and harsh
environments such as industrial and
public areas vulnerable to vandalism.
Dirt & Air Seperation - Altecnic Commercial Guide
Altecnic Ltd
In heating and chilled water systems the circulating water will undoubtedly contain debris which entered the pipework during site storage and construction. Altecnic has a range of market-leading solutions to this common problem.
Dirt separators are an efficient way of removing debris and are capable of removing small particles down to 5m in size. Debris is collected in the large chamber allowing longer periods between cleaning, which can be done whilst the system is operating. Dirt separators if cleaned regularly have low pressure loss characteristics, important for reducing energy demands and ongoing running costs.
Excessive air within a system can cause noise, reduce the accuracy of control valves and the performance of heating and cooling equipment, therefore removal is important.
AshJack™ - The Lightweight Over Roof System
Ash & Lacy
By constructing a lightweight steel sub-frame over the existing roof (which is then over-clad), an effective pitch is created to facilitate water run-off. This combined with the relocation of drainage to the outside of the building ensures water is permanently removed from a roof and the potential for any further problems eliminated. Developed by Ash & Lacy in 1991, AshJack™ was the first structural lightweight flat-to-pitch over-roof conversion system to be introduced in the UK. Supported by a network of experienced installers, AshJack™ provides a range of systems, which can be individually tailored to suit the specific structural and design requirements of the existing building. Over-roofing conversion system has been punching above its lightweight properties for two decades.
DRYX600 Hands in hand dryer
KWC DVS Limited
The high speed “hands-in” dryer is designed with a touch free opto-electronically controlled sensor and integrated HEPA filter, the DRYX600 provides peace of mind in environments where hygiene is essential. The antibacterial ABS plastic, separate water tray and drainage hole also ensures optimum hygiene by preventing water spilling on to the wall and floor (protection class IPX4).The DRYX600 is speedy, robust, and energy efficient with a dry time of just seven seconds.
The air speed and velocity is adjustable with an option for
warm or cold air. An auto-shutdown function after 25 seconds prevents any misuse. The DRYX600 is also quieter than most hand dryers on the market with a minimum noise level at just 65dB, making it an excellent choice for education washrooms.
Resin flooring Resuflor Topseal coating system
Sherwin-Williams
Resuflor Topseal is a water based epoxy resin floor system for application as an industrial floor coating at a thickness of
around 100 microns. This is a roller applied economic industrial coloured floor coating providing a hard seamless finish. Using two-pack technology Resuflor WB the epoxy coating used in this system has extremely good adhesion to concrete and other cementitious surfaces. The product is low odour being a water based product and is vapour permeable. The product is typically used as an industrial floor finish for large areas of concrete such as warehouses, production areas and workshops where an economic hard wearing clear or coloured finish is required to protect and case harden a substrate. Resuflor WB can also be used as a wall finish.
PermaRock SiliconeUltra Through Coloured K Textured Render (self-cleansing nano-quartz, colour-fast renders)
PermaRock Products Ltd
Silicone Ultra K Finish represent the state-of-the-art in external through-colour renders.
Based on a hybrid binder system of organically crosslinked nano-quartz particles and silicone emulsion, SiliconeUltra
K Finish offer a class-leading self-cleansing effect with enhanced resistance to dirt pick-up.
Lightweight, water repellent, have excellent water vapour permeability and can resist aggressive air pollutants. Photo-catalytic particles help actively break down dirt particles which can be washed from the surface under weathering and contain a preservative against coating deterioration due to algae and fungus.
Available in an extensive range of colours with a K (stippled) texture, in 1.5, 2.0 and 3.0 mm grain sizes.
Cemfloor NH Technical Data Sheet
Cemfloor Liquid Screeds
Cemfloor NH is a specially formulated self levelling cementitious floor screeds. Cemfloor NH can be applied to
a wide range of floor types.
Cemfloor NH is a mixture of Cemfloor binder, cement, water and a suitable sand and is a high performance screed which complies with EN 13813:2002 ‘Screed Material for Floor Screeds’.
Hospitality From Calor Gas
Calor Gas Ltd
From a local country pub to a picturesque rural hotel, no matter how big or small, a reliable source of energy is must to keep your customers satisfied. Where mains gas isn't available, Calor LPG and Futuria Liquid Gas are a versatile fuel solutions for your central heating, cooking and hot water.
BASF Enertite Brochure
ECON Building Products – BASF Distributor
A low density open cell spray applied polyurethane foam insulation ideal for roof, timber frame, wall and floor applications. Applied as a liquid, this water blown system expands to many times its original size completely filling all voids helping to provide a continuous thermal and airtight building envelope.
HardRock Multi-Fix DD Tapered - Datasheet
ROCKWOOL Ltd
ROCKWOOL HardRock Multi-Fix (DD) Tapered is a stone wool insulation board faced with a mineral-coated white fleece. The product is engineered to a fall for effective rain water management.
Manufactured from volcanic stone, HardRock Multi-Fix (DD) Tapered achieves Euroclass A2-s1, d0 (non-combustible).
Cembrit PB
Swisspearl
Building board; Cembrit PB is a reinforced, lightweight, water resistant cement board with tapered edges to facilitate invisible butt joint installation. Ideal for use on external
applications, such as rendering, brick slips or stone cladding. Suitable as backing board in internal wet areas where ceramic tiles will be used as the decorative finish.
Instructions - Horne TSV1-3 with auto-divert Thermostatic T4/T9 Shower Panels
Horne Engineering Ltd
Installation, Commissioning, Operation and Maintenance instructions for Horne pre-plumbed surface mounted shower panels with integral Thermal Disinfection Unit ILTDU and (Type3 and UK Water Regulation 4 Approved) TSV1-3 dual control shower valve with automatic flow diverter (bimodal) - to fixed shower head or hose and handset.
Freestanding Emergency Body Drench shower with eye/ face shower and bowl, modular
BROEN-LAB
Body shower with eye/face shower and bowl, modular. In brass and SS with
chemical resistant red BROEN-LAB Polycoat with self-draining shower head.
Eye wash with built-in FLOWFIX for regulation of water flow (16 l/min). Bowl in
Stainless Steel with integrated outlet.
Min. working pressure: 1.5 bar.
Dulux Trade Blockfiller Plus
Dulux Trade, brand of AkzoNobel
Dulux Trade Blockfiller Plus is a water-based product, which is suitable for interior use on concrete walls and ceilings. Designed to fill surface imperfections in concrete block and poured concrete, to improve the appearance of the substrate. It can act as a finish or a primer for subsequent Dulux Trade finishes. Ideal where minimum downtime and efficiency is required.
ACO Landscaping Systems brochure
ACO Technologies plc
ACOs range of landscaping systems help homeowners to create an attractive and sustainable water management solution around the home.
ACO GravelGuard and GroundGuard are ideal for use in domestic driveways and paths, where a natural grass or decorative aggregate finish are required to complement the landscape, whilst also reducing the risk of potholes, rutting or grass damage.
Screening and ventilation louvres
Maple Façades
Our louvre screening system conceals unsightly roof plant areas and enhances building exteriors. At the same time, the screening louvres can provide protection from water ingress without preventing airflow to equipment and machinery. A unique clipping system enables quick and easy assembly on-site with no risk of bi-metallic reaction.
Hydrocure Mortar Product Guide
Tarmac
HYDROCURE has been specifically formulated to enhance the performance of mortar, and lessen the effect of moisture migration when used in conjunction with high suction masonry units. With the qualities of dry silo pre-blended mortar, once mixed, HYDROCURE is an instant, workable mortar with the added benefit of improving water retention to allow >90% retentivity.
Hydrocure Mortar Technical Data Sheet
Tarmac
HYDROCURE has been specifically formulated to enhance the performance of mortar, and lessen the effect of moisture migration when used in conjunction with high suction masonry units. With the qualities of dry silo pre-blended mortar, once mixed, HYDROCURE is an instant, workable mortar with the added benefit of improving water retention to allow >90% retentivity.
PermaRock Brick Effect Render (two-coat self-coloured polymer-modified cement-based render used to replicate brickwork)
PermaRock Products Ltd
PermaRock Brick Effect Render (BER) is pre-batched, two-coat self-coloured polymer-modified cement-based render designed to simulate the appearance of brickwork for use with our external wall insulation and render systems.
It can also be used to create features such as soldier courses, brick quoins, etc. in conjunction with other finishes.
Incorporating a silicone water repellent, BER offers improved water resistance and helps maintain a cleaner surface and is particularly suited to projects where new brickwork cannot be used.
The render can be applied to achieve metric or imperial brick sizes, any bond pattern and also to create non-standard patterns and effects.
Incorporating special pigment powders into the render surface can also further diversify the aesthetics achievable
Screeding and Waterproofing a Wet Room / Walk In Shower / Bathroom
WM | Wetroom Materials
The LIP Wet Room System allows you to create the perfect Scandinavian Wet Room or Walkin shower to any size or shape.
The LIP Wet Room System consists of 3 components. A screed to create the slopes, a waterproofing membrane and a specialist tile adhesive.
The LIP226 screed enables you to create a slope and works from any depth to 2mm in thickness in one application.
The LIPVS30 Waterproofing Membrane is designed to work on all construction materials. It creates a 100% water tight seal and can flex up to 4mm without cracking.
Lastly The LIP Wet Room Tile Adhesive is designed to work with the membrane. It has a high elasticity and tensile strength to withstand large volumes of water.
For more information visit their website www.wetroommaterials.com or call them on 01332 840820
Showing 433-468 of 546