"water pipes and pipe fittings"
2,935 results found
Relevance
Showing 505-540 of 578
Pendock Floor Ducting
Pendock
Pendock's range of floor ducting eliminates burying pipes and cables in the ground. It consists of a preformed tray made from galvanised steel and a plywood lid. Corners, T sections, crossovers, risers, dividers and stop ends are available on certain ranges.
The FDT range is a single compartment available in standard and bespoke sizes to suit requirements.
The MCFDT range is used to conceal electrical wiring and as standard has three compartments to maintain continuous separation of cables.
Horne In-Line Thermal Disinfection Unit (ILTDU)
Horne Engineering Ltd
The Horne In-line Thermal Disinfection Unit allows for simple, regular thermal disinfection of water system terminal fittings. Operate routinely to reset pathogen cfu counts to zero and ensure continuing patient safety. Fit upstream of any tap, tmv or shower for easy pathogen control. Also integrated into T4 and T9 Horne shower models.
IKO Permaphalt Mastic Asphalt Brochure
AccuRoof
Permaphalt is the result of extensive research and development, and the careful selection of polymers to provide improved performance in all flat roof specifications.
Permaphalt can be applied to form a continuous waterproof covering over flat, sloped or curved surfaces. It can be worked round pipes, roof lights and other projections to provide a completely seam free membrane.
Permaphalt mastic asphalt is suitable for insulated warm roofs, un-insulated cold roofs and inverted/green roof configurations.
IKO Permaphalt Mastic Asphalt Datasheet
AccuRoof
Permaphalt is the result of extensive research and development, and the careful selection of polymers to provide improved performance in all flat roof specifications.
Permaphalt can be applied to form a continuous waterproof covering over flat, sloped or curved surfaces. It can be worked round pipes, roof lights and other projections to provide a completely seam free membrane.
Permaphalt mastic asphalt is suitable for insulated warm roofs, un-insulated cold roofs and inverted/green roof configurations.
Drainage Systems for Below Ground
BLÜCHER UK Ltd
BLÜCHER® EuroPipe is the ideal drainage system for belowground use. The stainless steel systems offers the specifier and installer a metallic push-fit, lightweight and cost effective drainage system for foul and storm water drainage.
Unislope 1K Highline Panel Wet room Kit, Wall Channel Drain, Wet Base and Shower Tanking. - DATA SHEET
WM | Wetroom Materials
Unislope 1K Highline Panel and Frame is a wet base suitable for use on a wooden or concrete floor. The Wall Mounted Linear Drain in this kit comes with a Solid Stainless Steel Frame and Panel. The Wet Base Unislope Board has the perfect gradient built into to ensure that the water flows freely to the drain. The solid Unislope board can not be crushed which makes it perfect for any thickness of tile. The tanking system provided with this kit covers up to 7-8 sqms and is suitable for use on the floor and walls. The standard capacity of the wet room drain is 48 litres per minute, there are several options available from shallow drainage with a building depth from 64mm to high capacity outlets. Multi directional waste pipes to suit the site plumbing requirements.
Armourplan Pre-Formed Details Datasheet 2019
AccuRoof
IKO Polymeric offers a range of off the shelf and bespoke pre- fabricated PVC details to make the installation of an Armourplan roofing system simpler, quicker and more aesthetically pleasing. Injection moulded PVC internal and external units are available as well as bespoke units such as pipe & post penetrations to complex movement joint details manufactured at our in house facility from Armourplan D membrane.
Includes details for features and benefits, internal and external corners, Armourplan membrane discs and bespoke Armourplan membrane details.
Test Report Slip Resistance: Microtopping® Grit FC 120 + PUWB Poliurethane Sealer Water-Based Type IDEALPU WB
Ideal Work UK
Microtopping® Ramp Test
GEC Anderson Data Sheet - V345 Bowl Urinal
Anderson, GEC Ltd
V345 Bowl Urinal
V345 wall mounted stainless steel bowl urinal. Complete with spreader, grated outlet and plastic water trap for wall outlet. Ø15mm threaded inlet fitting. Concealed fixing at top with screw fixing at base.EN 1.4401 acid resisting grade satin stainless steel.
Inta Tenant Hub
Intatec Ltd
The Inta Tenant Hub is a combination valve
providing a stop valve, pressure reducing valve,
pressure gauge, class D water meter carrier and double check valve in one convenient and easy to fit unit.
The Inta Tenant Hub is provided complete with a whole assembly moulded insulation cover.
TS72 Instruction Sheet
3v Architectural Hardware Ltd
Fitting Instructions
Woodstock Homes Case Study
Calor Gas Ltd
A communal LPG supply from Calor offers homebuyers all the reliability, controllability and comforts of mains gas in an exclusive rural setting.
As a leading homebuilder in the South West and South Wales, Woodstock Homes takes great care over its developments overall design and construction, from thoughtful plans to high quality finish. The well-regarded
developer takes a balanced, environmentally sympathetic approach to every home and each property is finished to an extremely high specification.
Just like mains gas, the LPG is distributed through a network of underground pipes directly to each home, each of which is individually metered.
IKO Armourplan D PVC Single Ply Flat Roof Membrane datasheet
AccuRoof
Armourplan D membrane is a non-reinforced PVC membrane for detailing on Armourplan flat roof systems. The flexibility allows the material to be formed easily into intricate details ensuring the roof installation is fully waterproofed. Armourplan Detailing Membrane is adhered to suitable detailing surfaces using Armourplan PVC Contact Adhesive or Sprayfast PCA adhesive. All overlaps and joints are heated welded using suitable hot-air welding equipment. Armourplan D membrane can be used to waterproof the joints between Armourplan membrane coated metal flashing sections and gutter joints or used to form complex details such as pipe penetrations or external corners.
Stirling Specialist Rooms
Stirling Medical & Scientific Ltd
Medical Fitted Furniture
12 - Wall & Ceiling
One Light UK Ltd
Wall & Ceiling Fittings
Horne VR Shower Head - Spray Locus Chart
Horne Engineering Ltd
Dimensioned drawing showing water throw, wetted footprint, from Horne vandal resistant shower head fitted with (standard issue) 8 L/min flow regulator, and where shower panel is mounted 1000mm above finished floor level.
NB. the location and size of the wetted area will differ if the shower is mounted at an alternative height.
KG-FIX Wall Collar TDS
Newton Waterproofing Systems
Water barrier flange for the watertight integration of waste water pipelines into concrete walls and floors.
Larkfleet Homes Case Study
Calor Gas Ltd
Housebuilder Larkfl eet SW Ltd is part of
the Larkfl eet Group, an award-winning
housebuilding and development company based in Bourne, Lincolnshire that places particular emphasis on sustainability.
To maintain the tranquil countryside feel
of the development, Calor installed two
4000-litre underground LPG tanks, buried out of sight of the 20 three and four-bedroom detached and semi-detached homes. Gas is distributed through a network of hidden pipes directly to each home, which each have
individual meters that are read annually by Calor. This allows homeowners to be invoiced for their individual consumption, which means on completion of the development, Larkfleet will not need to be involved with its energy supply on an ongoing basis.
Lead Slate Datasheet
Associated Lead Mills
Provides weather-tight joints where flue pipes and soil stacks penetrate a slate, tile, asphalt, felt or lead covered roof.
The flexibility of lead allows the slate base to be dressed to tiles of all profiles avoiding wind lift or chatter problems. Slates are cut for BS EN 12588 Code 4 rolled lead sheet and fabricated by lead welding. Slate upstands are avaiable in five diameters from the 50 mm to 150 mm at angles 30° and 45° to the base for pitched roofs and 90° for flat roofs.
Includes further details on the product, advice on use, lot sizes, health and saftey advice and product description and properties.
Installation Guide
Dolphin Solutions
Recommended fittings heights etc.
Edge EVO 2.0 - EXC - WiSAN-YME 1 S 2.1-14.1 Range
Clivet UK
A single-unit reversible air/ water heat pump for heating, cooling and the production of domestic hot water.
BROEN-LAB UNIFLEX LIFT/TURN VALVES FOR BURNING GASES
BROEN-LAB
The laboratory fittings from BROEN-LAB
are designed and manufactured with the
requirements of a modern laboratory in
mind.
The hallmarks of these fittings are good
performance, durability, easy operation,
flexibility and streamlined design, along
with an easy-to-clean and attractive appearance.
Fittings from BROEN-LAB are ideal for all
types of laboratories, and are delivered
with easy-to-mount fixing items/mounting
kit, that will keep the fitting fully locked in
its position when installed. Consequently,
the fitting will not turn unintentionally,
which would result in leaks.
FlowCon SM Actuator
FLOCONTROL LTD
Fit on FlowCon SM PICV Range
Sealmaster Cyclone Application Guide
Sealmaster
Instructions on how to fit the Cyclone Seal.
Sealmaster Watershed Application Guide
Sealmaster
Instructions on how to fit the Watershed seal.
Concealed-Conduit-Panel
Gilcrest Manufacturing
Custom panels to fit conduits and services
Polysealant adhesive for penetrations and formworks
Polyglass Ltd
POLYSEALANT SYSTEM is an innovative complementary system for use on roofs comprising polymer bitumen membranes or PVC-P
and FPO/TPO synthetic membranes, for sealing the connections of penetrations such as aerials, cables, pipes, poles, bases, fastenings for solar/photo-voltaic panels, support structures, etc.of all shapes and sizes .
POLYSEALANT SYSTEM is suitable for application on the following waterproof coverings:
Mineral surfaced BPP (APP) polymer bitumen membranes;
BPP (APP) and BPE (SBS) polymer bitumen membranes, smooth or sand surfaced (subject to preparation)
BPE (SBS) mineral surfaced bitumen membranes;
PVC-P plastic-coated polyvinyl chloride membranes;
FPO/TPO flexible polyolefin membranes (subject to application of PRIMER)
IKO Armourplan G PVC Single Ply Roof Waterproofing datasheet
AccuRoof
Available exclusively through SIG Design & Technology, Armourplan G membrane is a glass tissue reinforced detailing PVC membrane on Armourplan roof systems. The glass tissue reinforcement offers excellent dimensional stability and flexibility allowing the material to form easily into intricate details ensuring the roof installation is fully waterproofed. All overlaps and joints with are heat welded using suitable hot-air welding equipment.
Armourplan G membrane can be used to waterproof the joints between Armourplan membrane coated metal flashing sections and gutter joints or used to form complex details such as pipe penetrations or external corners. Armourplan detailing PVC membrane can also be used to form adhered upstands.
NBS Spec: Caltite (30 Ltrs)
Cementaid (UK) Ltd
Water-resistant concrete.
ROOFBOX System Manual
Nicholson STS Ltd
Standard set of fitting instructions for ROOFBOX cabinet and weathering installation. Any bespoke products would come with bespoke fitting guides specific to your project.
Flyscreen Roller Window and Door Screens - Wind Resistant - Top Mounted
The Flyscreen Company Ltd
Fits either inside or outside. If your window or door opens outwards the screen will be
fitted on the inside and vice versa.
Window screens can be Reveal fitted or Face fitted to the existing frame or to the wall
outside the Reveal.
Door screens can only be Reveal fitted, in order to allow chain operation from both
sides.
Windows fitted inside are operated with a spring assisted chain.
Windows fitted externally are operated with a pull cord and a bottom bar.
The screen is easy to release and rolls back smoothly into its cartridge.
Cartridge and side tracks in white powder coated aluminium.
Minimum width available 520mm. Maximum recommended size 2000mm wide x 2480mm
high.
Anti-wind brush strips hold the mesh firmly in the side tracks even in windy conditions.
802-Datasheet Iss02
Allgood Ltd
802-Datasheet Iss02 Overpanel Patch Fitting
801-Datasheet Iss03
Allgood Ltd
801-Datasheet Iss03 Top Patch Fitting
LVV40 into a timber fire door (door 1)
Lorient
LVV40 into a timber fire door fitting instruction
LVN20 into a timber fire door (door 2)
Lorient
LVN20 into a timber fire door fitting instruction
RonaDeck EcoAgg UV
Ronacrete Ltd
RonaDeck EcoAgg UV is a resin bound aggregate surface for pedestrian traffic. RonaDeck EcoAgg UV surfaces are decorative and functional, seamless and slightly flexible. The open matrix allows water to drain through to the base, eliminating water ponding and allowing water to drain to planted areas or land drains. The system is designed to be SuDS compliant reducing the impact of development on flood risk and allowing water to flow into water courses or water harvesting systems. Edgings created from brick, stone, timber or steel should be installed to retain and protect the resin bound surfacing.
Showing 505-540 of 578