"external walls"
2,467 results found
Relevance
Showing 145-180 of 286
MP557 - ACOUSTIC PARTY WALL
Mayplas
MP557 Acoustic Party Wall DPC technical data sheet
Wall Protection Systems - Bioclad Brochure
BioClad
Wall Protection Systems
Novia Breather Membranes
Novia Ltd
Breather membranes allow insulated structures to easily release excess moisture vapour into the atmosphere and keep the internal components of wall and roof structures dry, whilst performing the task of a secondary protection membrane and preventing penetration by external environmental impurities such as dirt and rain. These types of membrane are installed on the cold side, or the external side of the insulation beneath the main outer building lining, roof-tiles or cladding.
Altro Whiterock wall designs leaflet
Altro
Altro Whiterock wall designs leaflet
Altro Walls ShowerKit Cleaning Guide
Altro
Altro Walls ShowerKit Cleaning Guide
Pressalit wall bin
Pressalit Limited
Easy to clean, with or without a bin liner.
You can easily use the wall bin with a bag or choose to rinse
out the removable inner bucket if you prefer not to use a bin
liner. The inner bucket is designed with rounded corners for
effective cleaning.
The wall bin also allows for easier floor cleaning. The wall bin
takes up almost no space in the room room and you do not
need to move it when cleaning the floor.
Cordek Correx Data Sheet
Cordek Ltd
Correx is the original twin wall fluted
polypropylene protection board and has
become the industry standard for most
temporary protection applications, following
its launch in 1974.
It can be used both internally and externally for a wide range of applications within the construction industry including protection of floors, walls, doors, windows and ceilings and as a formwork material for concrete construction.
Superglass Superwall 32 Cavity Batt - Datasheet
Superglass Insulation Ltd
Superglass Superwall 32 is a British Board of Agrément (BBA) approved, non-combustible and water repellent glass mineral wool insulation cavity wall batt. The flexible batt is supplied at 455mm wide to allow easy installation between standard vertical wall tie spacings, reducing the need for on-site cutting and waste.
Superglass Superwall 32 is designed to provide thermal insulation in full or partial fill in new external masonry cavity walls.
Vegetated (Green) Retaining Walls and Bunds
ABG
A guide to the selection and specification of Webwall Vegetated Retaining Walls.
12 - Wall & Ceiling
One Light UK Ltd
Wall & Ceiling Fittings
HD1053: Single Metal Stud Wall
Hush Acoustics
A specially designed acoustic wall system for a single metal stud wall that will exceed regulations for sound reduction in properties.
Hush Acoustic Wall Covering
Hush Acoustics
This product range offers a new exciting range of decorative wall coverings that achieve exceptional noise reducing performance levels and also looks aesthetically pleasing. The product is specifically designed for installation onto walls in classrooms, meeting rooms, offices, call centres and are in fact used anywhere where reverberation is an problem and causing lack of speech clarity. In addition to the acoustic values, the Hush Acoustic Wall Covering is designed to improve the thermal performance of the wall it is placed upon.
50mm-Cleanroom-Wall-Panel
Gilcrest Manufacturing
FM approved cleanroom wall panel for our unique system
Spacetherm Multi Datasheet - Walls
A Proctor Group Ltd
Spacetherm Multi Datasheet - Walls
Spacetherm Wall Liner Datasheet
A Proctor Group Ltd
Spacetherm Wall Liner Datasheet
JACKOBOARD® - Wall Niches
BEWI UK Construction
JACKOBOARD® - Wall Niches
Technical data for Bio Wall
Hemspan® Ltd
Full product data for Bio Wall
Rocko Tiles Waterproof Wall System
Kronospan Ltd
Rocko Tiles Waterproof Wall System
Universal Wall Sleeves TDS
Newton Waterproofing Systems
Seals through all wall types
UK Wall checklist
Senso UK Designs Limited
UK Wall checklist prior to installation
Spacetherm Wall Liner Brochure
A Proctor Group Ltd
Overview of Spacetherm Wall Liner system
Beplas Hygienic Bump Rails and Wall Protection
Be-Plas Hygienic Walls & Ceilings Ltd
Protect your investment in hygienic environments with high impact PVC bump rails. Designed specifically for food processing and food retail environments our bump rails stop trolleys, personnel and anything else from damaging your walls or wall mounted utilities.
Available in a variety of sizes and shapes we have a solution for any high or indeed low traffic area. Areas can even be colour coded to identify risk and separation for high care and low care. Heavy duty options for very high impact.
Case Study - Chantry Hall: mixed use development
H+H UK Ltd
Phase one consists
of a mix of two storey 2 and 3-bedroom
affordable and retirement houses. The
external cavity walls are constructed with
a Thin-Jointed aircrete inner leaf and either
brick, flint or cladding to the outer-leaf,
topped with a pitched, tiled roof.
Bespoke Wall Beds
Innova Care Concepts
Wall beds give parents, guardians, and loved ones a place to relax and rest. They need to be space-conscious and compact in their design. Our custom-made wall beds offer a solution to any design. Have a look at what we offer.
StoBrick
Sto Ltd
Clay brick slips manufactured from the same raw materials as traditional bricks. There are three types of StoBrick available - Hand-moulded, Water-struck and Extruded. Between them they provide a huge range of options, covering all requirements, from surface structures which provide maximum visual impact, through to those where a more uniform and consistent brick appearance is required.
A comprehensive range of sizes, formats, surface textures and colour variants are available to add traditional brick character and individuality to external wall insulation or a rainscreen cladding system.
High Security CPNI Rate External Turnstile
Gunnebo Entrance Control
CPNI - approved. External turnstile. Hand operated. 90° configuration, 4N° rotor elements.
Positive action lock which prevents two passages at one time
Self centering mechanism to the reset position
Anti backup device preventing reverse rotation
Materials
Turnstile Frame: box and round hollow section with extra infill bars in the side frames fitted to minimise the gaps and slow down the attacker.
Mechanism Cover: Two part, steel made, same above finishing, secured with security fixings.
Rotor Assembly: A mild steel trombone rotor hot zinc sprayed with polyester powder coated finish, filled with a composite material to withstand a prolonged cutting attack. Reinforced trombone arms with steel ribs to stop the arms from being forced. A bespoke designed bearing so rotor cannot be forced.
Floor Door Flush External Access
Surespan
Floor Door flush access covers are suitable for all industries. The floor access hatch is manufactured in magnesium alloy. 5 bar tread plate lid reinforced from FACTA Class A to E loading. Access covers can be fire rated. Flush hatches have a gas spring assisted aluminium tread plate lid that locks in the open position with a safety hold-open stay to prevent against accidental closure. Available from pedestrian rating to D400 loading in all bespoke shapes and sizes.
External Walk On Rooflight
Next Generation Rooflights
Beeck External Renosil Application Guide
Beeck
Biotecture Living Wall - Operational Conditions
Biotecture Limited
The Biotecture Living Wall System is designed & maintained to remain within the parameters that satisfy the operational conditions of the Independent Fire Consultants Engineering Assessment of Reaction to Fire of the Biotecture Living Wall System. There are processes and checks that we undertake as routine on all of our monitored green walls.
Anchor Segmental Retaining Wall Spec Guide
AG
Anchor Segmental Retaining Wall Spec Guide
Altro Walls ShowerKit Technical Data Sheet
Altro
Altro Walls ShowerKit Technical Data Sheet
Altro Whiterock wall designs welding instructions
Altro
Altro Whiterock wall designs welding instructions
Altro Whiterock Wall Designs Sample Card
Altro
Altro Whiterock Wall Designs Sample Card
Ancon Low Thermal Conductivity Wall Ties
Leviat
The Ancon range of low thermal conductivity wall ties minimise heat loss through thermal bridging, improving the energy efficiency of a masonry cavity wall. The use of these ties can reduce insulation depth and wall footprint.
In addition to a number of stainless steel wire wall ties, the range includes the Ancon Teplo range which is manufactured from pultruded basalt fibres set in resin. This BBA-approved product is available exclusively from Leviat. It has a thermal conductivity of just 0.7W/mK, making it the most thermally efficient wall tie on the market.
13 - Wall & Ceiling LED
One Light UK Ltd
Wall & Ceiling LED
Showing 145-180 of 286