"wall finishes external"
8,443 results found
Relevance
Showing 1297-1332 of 1520
Knauf Perforated Plasterboard
Knauf UK
Non-Demountable Solutions For Acoustic Ceilings And Walls
Novia Black Pro Technical datasheet
Novia Ltd
Technical Datasheet for wall & roof Breather Membrane
Tecties TT4 datasheet
Tec-Ties Ltd
Tecties Type 4 wall tie datasheet
Hollow Dense Block Datasheet
Thomas Armstrong (Concrete Blocks) Ltd
Hollow dense concrete blocks for walling applications
Structural calcs
WoodBlocX Ltd
Design calculations for standard WoodBlocX retaining wall
Novia Breather Membrane Lap Tape
Novia Ltd
Novia Breather Membrane Lap Tape is a sealing and bonding tape suitable for sealing laps on external breather membranes within both roof and wall applications. It should normally be used in conjunction with Novia double-sided acrylic overlap tape for a fully sealed and airtight membrane installation.
Novia Breather Membrane Lap Tape should be used in conjunction with Novia Black and Novia Reflex breather membranes for use on roofs to meet BS 5534 wind uplift tests. The UK wind zone maps can be found on the individual product datasheets.
Kiwa BDA for Cavity System 2 Mineral Wool with Flex-I-Slip
SPS Envirowall Ltd
The Cavity System 2 MW EWI Brick Slip Cladding System is a mechanically-fixed, EWI MW insulated twin-sheathing board, brick slip cladding system.
It is suitable for installation on external sheathed light gauge steel frame supporting walls and has a drained cavity behind the outer CS2 secondary sheathing boards. For use on existing or new, residential or non-residential high-rise buildings up to and over 18 m in height in the UK. The system can be designed for a 30 or 60-year service-life durability as required.
StoBrick
Sto Ltd
Clay brick slips manufactured from the same raw materials as traditional bricks. There are three types of StoBrick available - Hand-moulded, Water-struck and Extruded. Between them they provide a huge range of options, covering all requirements, from surface structures which provide maximum visual impact, through to those where a more uniform and consistent brick appearance is required.
A comprehensive range of sizes, formats, surface textures and colour variants are available to add traditional brick character and individuality to external wall insulation or a rainscreen cladding system.
BauderFLEX K4E Roofing membrane (Grey Slate)
Bauder Ltd
Elastomer bitumen torch-on capping sheet. The product features a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture, and a mineral finish to provide protection against UV degradation.
BauderFLEX K4E Roofing membrane (Brown)
Bauder Ltd
Elastomer bitumen torch-on capping sheet. The product features a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture, and a mineral finish to provide protection against UV degradation.
Bauder K5K Roofing membrane (Grey Slate)
Bauder Ltd
Elastomer bitumen torch-on capping sheet. The product features a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture, and a mineral finish to provide protection against UV degradation.
Bauder K5K Roofing membrane (Charcoal Grey)
Bauder Ltd
Elastomer bitumen torch-on capping sheet. The product features a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture, and a mineral finish to provide protection against UV degradation.
BauderFLEX K4E Roofing membrane (Charcoal grey)
Bauder Ltd
Elastomer bitumen torch-on capping sheet. The product features a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture, and a mineral finish to provide protection against UV degradation.
Bauder K5K Roofing Membrane (Brown)
Bauder Ltd
Elastomer bitumen torch-on capping sheet. The product features a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture, and a mineral finish to provide protection against UV degradation.
Dulux Trade Protective Woodsheen
Dulux Trade, brand of AkzoNobel
Dulux Trade Protective Woodsheen Woodstain is a solvent-based, medium build satin finish for interior wood. Specially formulated to colour and protect interior wood, providing a durable finish to resist wear-and-tear.
Acoustics
Cellecta Ltd
Cellecta acoustic insulation brochure provides architects and specifiers with an extensive guide to acoustic sound proofing insulation products for new build and refurbishment floors, walls and ceilings. Robust detail and pre-completion test (PCT) solutions available for timber, steel and concrete floors, timber stud walls, metal frame walls and masonry walls. Acoustic floor boards, overlay mats, soft coverings, insulation wool, acoustic rolls, battens and wall lining systems have been specifically designed to achieve compliance with Part E of the Building Regulations.
Ventilation Product Guide
Cavity Trays Ltd
Ventilation at floor level, ventilation through walls, ventilation at eaves and fascia level, ventilation via the soffit, ventilation where roofs abut walls, ventilation through the roof.
Everything Specification
Geberit Sales Ltd
Combining technical expertise with a vast portfolio of products and systems, we offer behind-the-wall and in front of the wall sanitary solutions to deliver a complete package to suit your project.
Acoustic Socket Liner
JCW Acoustic Supplies Limited
Acoustic Sockets help assist in maintaining the acoustic integrity of walls when electrical sockets are an issue.
Easily installed and highly effective in preventing sound penetration through walls.
Data Sheet - Solo Circle XL 1600
Saint-Gobain Ecophon
Solo Circle XL is a large free hanging unit with two semicircles, offering a high degree of design possibilities. For applications when it is not possible to install a wall- to-wall ceiling
Technical Information Schock Sconnex Type W
Schöck Ltd
Load-bearing thermal insulation element for reinforced concrete walls. The element transfers, depending on load-bearing level,
compressive and shear forces in the longitudinal and transverse directions of the wall.
DBFS Veterinary Furniture
David Bailey Furniture Systems Ltd
Our Veterinary range has been developed to meet the everyday needs of veterinary surgeons and nurses, combining good looks with robust, durable and ergonomic designs. Available in a wide variety of colours and finishes, our Veterinary furniture includes floor-mounted and wall-hung storage units, cupboards, drawers, worktops and shelving. We also supply a comprehensive range of fittings, fixtures and specialist joinery to meet your individual needs.
Delta Aquaduct Drainage Pipe Product Data Sheet
Delta Membrane Systems Ltd
Delta Aquaduct is an external land drain coil. Installed externally to direct ground water into a sump or soak away and reduce pressure from bearing on the structure.
Delta Aquaduct is perforated for maximum performance and incorporates an outer geotextile filer to prevent particles from entering the conduit system. Available in 2 lengths/widths with complimentary connectors also available ((please see below table for DMS codes) also referred to as couplers or joiners) to connect multiple coils of Delta Aquaduct together.
Pendock Column Casings
Pendock
Column casings to suit any environment and budget. Prefinished in laminate or mdf for site painting. Metal columns and GRP which are suitable for external use. GRG for a column where a seamless joint is required.
Adhesives and Grouts
Mapei (UK) Ltd
Adhesives and grouts for PUBLIC AREAS, LOUNGES AND LIVING AREAS, WELLNESS
SPA AREAS, SWIMMING POOLS, SHOPPING
CENTRES, BATHROOMS, CHANGING ROOMS AND GYMS, KITCHENS AND RESTAURANTS, EXTERNAL FLOORS, FAÇADES AND INFRASTRUCTURES
Ipe Hardwood
The Outdoor Deck Company Ltd
Ipe is a wood of extremes: extremely dense and durable, as well as extremely strong. Its incredible hardness and strength make it well suited for decking and other external applications though it is referred to as `Brazilian Walnut`.
Aluminium Timber Effect - Colour Options
BCL Timber Projects Ltd
Available Faux wood finishes for the BCL Aluminium TIMBER EFFECT range.
BEX600V Datasheet
Bathgate Flooring Ltd
Extra heavy grade panel with bonded static dissipative vinyl finish
Geschwender Laminates Colour Card
LSA Projects Ltd
Standard colour and finish range for Geschwender lockers, cubicles, and other furniture.
Oscar Elite Image Pack
Oscar Acoustics
An exceptionally smooth and flat acoustic plaster finish with the appearance of conventional plaster.
TerraSmart® Composite Decking System Overview
RYNO
Overview of the system including technical data, system options, and available finishes
INSTALLATION MANUAL METAL SOLUTIONS T - Grid
Knauf Ceiling Solutions Limited
KNAUF CEILING SOLUTIONS INSTALLATION MANUAL METAL SOLUTIONS
The metal ceiling and wall solutions from Knauf Ceiling Solutions are
generally offered in galvanised steel. Some of the products can be
made of aluminum on request. The material thickness depends on the
selected product and the dimensions. Square tiles are manufactured
with a gauge of 0.5 to 0.6 mm, rectangular panels with 0.6 - 0.7 mm
and further products such as bulkheads, wall solutions, etc. in 1.0 mm.
Knauf Ceiling Solutions also offers pre-coated products which have a separate specification.
The standard finish is a high quality powder coating. A selection of popular colours is offered, other colours are available on request.
Acoustic Spray-On Plaster
CMS Danskin Acoustics
The Fade® system is a high quality plastering solution that absorbs unwanted noise in a wide range of environments. As an acoustic solution applied to walls and ceilings, its highly absorbent qualities allow for optimum acoustic control in large, commercial spaces.
Fade® can be applied to virtually any surface including straight and curved walls, dramatic angles and arching domes offering a more flexible, discreet alternative to traditional acoustic solutions, such as suspended ceilings.
Available in a choice of finishes and exclusively through CMS Danskin Acoustics in the UK Fade® Albus and Fade® Albus Plus offer greater flexibility over acoustic performance and interior design.
Limelite Renovating Plaster
Tarmac
Limelite Renovating Plaster is a lightweight and fibre reinforced renovating plaster that controls and manages moisture movement in traditional and damp buildings.
Easy to apply internal plaster that is not only breathable, salt resistant, fire resistant and reduces condensation & mould but has excellent thermal insulating properties.
Limelite Renovating Plaster works with the fabric of a building, letting walls breathe and provides a quality, durable finish that protects and performs for years to come.
This breathability enables substrate to dry naturally, meaning Limelite Renovating Plaster can be applied directly to wet walls to provide a fast and effective solution in both domestic and commercial properties, for flood damage remediation and heritage restoration within days
DELTA-MS DRAIN
Delta Membrane Systems Ltd
wallsThe innovative sheet for dry cellar walls. Dimpled sheet with an integrated drainage layer. Simple and cost-efficient foundation for dry cellar walls. Improved performance, improved protection.
Absorb-R Toughsound
Soundis
A decorative and highly sound-absorbent wall and ceiling panel
Showing 1297-1332 of 1520