NBS Source
I'm a manufacturer

"panel"

7,742 results found

Sort by:

Showing 1045-1080 of 1089

Sponsored
Ecophon Akusto Wall C Extra Bass

Ecophon Akusto Wall C Extra Bass

Saint-Gobain Ecophon

Ecophon Akusto™ Wall C Extra Bass has a concealed grid and bevelled edge to create a narrow groove between each panel. Available in a variety of surface options. The wall absorber has excellent sound absorption qualities from low to high sound frequencies. Best room acoustic properties are achieved when used together with a sound absorbing ceiling.
Sponsored
01 - Allgood Washroom Brochure

01 - Allgood Washroom Brochure

Allgood Ltd

Clean design, hygienic performance. A beautiful collection of washroom products from Allgood Since its creation, the Modric® range of architectural ironmongery has been synonymous with three words; quality, durability and aesthetics. Allgood have now developed a new range of architectural washroom panels and accessories which have been designed under the very same principles
Sponsored
Fastrack Washrooms

Fastrack Washrooms

Bushboard Washroom Systems Ltd

A complete off-the-shelf washroom in 48 hours* Fastrack is one of the most comprehensive fast-delivery washroom ranges available. Including cubicle, ducting and vanity units, Fastrack is a stylish, durable and economical washroom for dry areas, delivered box packed for easy handling. Panels are cut to size on-site and edges concealed in continuous channels. * Please note 48hr delivery is working days only.
Sponsored
Green Glue Noiseproofing Compound

Green Glue Noiseproofing Compound

Lynvale Limited

Green Glue Noiseproofing Compound was developed over hundreds of formulations specifically for use in typical field conditions. This has resulted in exceptional performance and consistency, allowing Green Glue to thrive in imperfect real-world conditions, and to routinely outperform more expensive factory damped panels. Higher in performance and lower in cost than previous technologies, Green Glue is a step towards quieter living.
Sponsored
Triton Cemflex Steel Waterbar for Structural Waterproofing Data Sheet

Triton Cemflex Steel Waterbar for Structural Waterproofing Data Sheet

Triton Systems

A brief technical data sheet summarising the features and benefits of Cemflex Steel Waterbar, a weatherproof waterbar designed to form a good watertight seal between ICF blocks/twin wall panels and the basement slab in below ground basement construction. Cemflex waterbar only reacts with water within the concrete - so no need to protect from rain after installation and before the concrete pour.
Sponsored
OPTIMO Plank Grating O2

OPTIMO Plank Grating O2

Elefant Gratings T/A PcP Gratings Ltd

OPTIMO 02 planks offers higher slip resistance properties compared to mesh or bar grating products, which is of prime importance to designers, engineers and users worldwide. Type 02 planks are used in many applications where a high level of slip resistance is required. Standard planks are stocked therefore making the product readily available for either the client or PcP to fabricate into suitable panel sizes.
Sponsored
Horizon Lookbook

Horizon Lookbook

Autex Acoustics Ltd

Suspended geometric shapes Horizon™ panels are clippable shapes used to create unique feature walls and suspended ceiling designs. They are easy to install and are well complemented when raised off the wall, or suspended from different heights–creating a floating effect. Features and benefits: - Maintains high ceilings - Sophisticated colour palette - Solid colour and smooth finish, with no edging or capping required - Hides undesirable surfaces
Sponsored
Design Composite - Brochure

Design Composite - Brochure

Acoustic Products Ltd

The transparent AIR-board® acoustic panels consisting of micro-perforated, translucent facings and a transparent or coloured honeycomb core - have a high degree of sound-absorption and are characterized by their unique optics and functionality. Whether individually, in formation, or as a surface covering a wall, a wall suspended freely in the room or as a part of a desk, as a dividing wall or mobile enclosure of a workplace, the elements can be flexibly and individually adapted to the respective room concept.
Sponsored
Prestige Copper Roof Tiles

Prestige Copper Roof Tiles

Matthew Hebden

Metal Tiles for Roofing & Cladding The Prestige range includes copper, mill finish and pre-patinated, and zinc in 3 shapes – the scalloped Traditional, the Compact panel, and the rectangular Elite. The metal clad asphalt shingles are produced to ISO 9001, the ISO 14001 environmental certification, and BS EN 544. The special composite construction provides strength with flexibility, so the tiles can be used on curved and complex roof shapes.
Sponsored
Gustafs Customisations Data Sheet

Gustafs Customisations Data Sheet

LSA Projects Ltd

Gustafs’ signature panel system lends itself to numerous style and installation customisations, both within the standard system as well as bespoke solutions for specific requirements. The options and ratings in this data sheet represent the relative cost uplifts for different additional features and finishes. All projects are quoted on a job-by-job basis and LSA will always give guidance on the best way to use the strengths of the system in each case.
Sponsored
ASF Belvoir 2 Rail Post

ASF Belvoir 2 Rail Post

Architectural Street Furnishings part of WB White Foundry

In style the ASF Belvoir Post is almost like a traditional cast iron bollard with a continuous diameter circular profile, centre feature ring and large flattened dome finial. Sold as a 2 rail post and rail, this post adapts excellently to take a panel that just goes to add to it's imposing look. 100% recycled. 100% UK manufacture. Also available in ductile SG iron BIM Objects Available
Sponsored
Daylighting for Industrial Buildings

Daylighting for Industrial Buildings

Brett Martin Daylight Systems

In the competitive world of industrial property development, creating versatile, energy-efficient buildings is of paramount importance. A major factor for industrial buildings is the incorporation of natural daylight. Rooflights are an important part of this as they reduce the need for artificial lighting and thus running costs as well as contributing to higher standards of health, wellbeing and safety. In this booklet we present the benefits of daylighting industrial buildings and the range of rooflight and panel glazing solutions we have to offer.
Sponsored
Hush Cem 37

Hush Cem 37

Hush Acoustics

Hush Panel Cem 37 has been designed as a versatile but high performing acoustic flooring to be used in lightweight construction types such as timber frame. The unique combination of a cement particle chipboard, the Eco-Friendly acoustic felt and rubber barrier mat make the product perform to all UK Building Regulations Requirements whether this be Approved Document E (England & Wales), Section 5 (Scotland) or Part G (Norther Ireland).
Sponsored
Hush Cem 33

Hush Cem 33

Hush Acoustics

Hush Panel Cem 33 has been designed as a versatile but high performing acoustic flooring to be used in lightweight construction types such as timber frame. The unique combination of a cement particle chipboard, the Eco-Friendly acoustic felt and rubber barrier mat make the product perform to all UK Building Regulations Requirements whether this be Approved Document E (England & Wales), Section 5 (Scotland) or Part G (NortherIreland).
Sponsored
PermaRock EPS-Premium (Grey) EWI System Sheet (high-performance, light-weight enhanced EPS graphite systems)

PermaRock EPS-Premium (Grey) EWI System Sheet (high-performance, light-weight enhanced EPS graphite systems)

PermaRock Products Ltd

PermaRock EPS-Premium external wall insulation (EWI) systems are high-performance, light-weight systems based on low lambda expanded polystyrene (EPS) insulating panels that incorporate microscopic particles of graphite for enhanced thermal performance and to dissipate heat. The systems are suited for the upgrade of existing buildings and for new buildings, particularly where exemplar levels of thermal performance are required. For use on buildings up to 18 metres in height.
Sponsored
Varfilex Glass - transparency plus sound insulation

Varfilex Glass - transparency plus sound insulation

Style - Moveable Partition Specialists

The DORMA Hüppe Variflex operable partition system with Variflex Glass panels is perfectly suited for dance schools, event centers or facility where good sound insulation combined with contemporary transparency is an essential requirement. Depending on the model selected, Variflex 88/100 will even achieve sound reduction indices of up to Rw 59 dB*, thus reliably preventing noise interference from one room to the other across the partition.
Sponsored
Surespan Brochure

Surespan Brochure

Surespan

Surespan are a UK manufacturer of bespoke roof access hatches, floor hatches including recessed floor doors, rooflights and ladders. All products can be made to order to most specification requirements. We pride ourselves on offering clients the complete Access Package, as we are also able to offer ceiling and wall access panels, glazed roof lights, floor ducting as well as a maintenance free roof handrailing system.
Sponsored
Topakustik Classic 29/3 M

Topakustik Classic 29/3 M

Acoustic Products Ltd

These grooves are the ideal solution for standard absorption requirements. As with all centre-to-centre distances, the wide grooving also comes with 2 mm, 3 mm and 4 mm grooves. Check out the 28/4 and the 30/2. The advantages of this type of panel include the beautiful design and good absorption. They are ideal for example on the ceiling to reduce low frequency issues. Very highly valued by customers. Planks can be easily installed with tongue and groove edges
Sponsored
GEC Anderson Data Sheet - Splashback: Edged And backed

GEC Anderson Data Sheet - Splashback: Edged And backed

Anderson, GEC Ltd

GEC ANDERSON® STEEL SPLASHBACKS AND PANELS Splashbacks from GEC Anderson® are made to measure using brushed satin stainless steel. • Folded edges with welded corners and substrate. 12 or 20mm edges. • Alternatively, flat sheet, excluding substrate. • Maximum single size: 4300 x 1600 mm. • Cut-outs (e.g. for sockets) available as required. • EN 1.4301 grade brushed satin stainless steel. • Plastic protected.
Sponsored
GEC Anderson Data Sheet - Splashback: Flat Sheet

GEC Anderson Data Sheet - Splashback: Flat Sheet

Anderson, GEC Ltd

GEC ANDERSON® STEEL SPLASHBACKS AND PANELS Splashbacks from GEC Anderson® are made to measure using brushed satin stainless steel. • Folded edges with welded corners and substrate. 12 or 20mm edges. • Alternatively, flat sheet, excluding substrate. • Maximum single size: 4300 x 1600 mm. • Cut-outs (e.g. for sockets) available as required. • EN 1.4301 grade brushed satin stainless steel. • Plastic protected.
Sponsored
Cordek Cellvent HX Data Sheet

Cordek Cellvent HX Data Sheet

Cordek Ltd

Cellvent HX combines the benefits of Ventform with the Cellcore HX range. Cellvent HX alleviates the effects of ground movement and also provides an excellent gas venting medium. It is designed for use under suitably reinforced ground floor slabs. The depth of the Cellvent HX panel will depend upon the amount of ground heave that has been predicted (for a full explanation and design examples please refer to our Ground Movement brochure or the Cordek website).
Sponsored
Edilians Phalempin Clay Plain Tile

Edilians Phalempin Clay Plain Tile

Edilians

Continuing a tradition of excellence in clay plain tiles. The 17x27 Plain Tile is a highly appealing traditional clay plain roof tile produced at Phalempin in the north of France. The mellow, textured surface combines the beautiful appearance of mature handmade tiles with affordable prices. Unique anti-capillary channels ensure enhanced performance and peace of mind at pitches as low as 30°. The Phalempin 17x27 integrates perfectly with the Edilians PV System of photovoltaic panels.
Sponsored
Lionweld Kennedy - GRP Solutions

Lionweld Kennedy - GRP Solutions

Lionweld Kennedy Group

As a pioneer of GRP products since the 1980s, Lionweld Kennedy has decades of experience providing engineered composite solutions for a wide range of applications. An overview of our GRP product range. We offer a wide range of products, including standard grating panels, available in different colours, depths and sizes, to complex GRP structures that are designed and manufactured to suit your project. Find out more about our range of GRP access products in our brochure.
Sponsored
Specification Considerations for Roof Terraces Guide

Specification Considerations for Roof Terraces Guide

Glazing Vision Ltd

In recent years, there has been an emerging trend of blending the lines between indoors and outdoors. Rooflights, bi-folding doors and natural materials have all helped to bring the outdoors in and now designers and homeowners are beginning to turn outdoor areas into luxurious and functional living spaces. Supported by a panel of experts, this ebook provides a comprehensive guide to designing roof terraces that not only affords plenty of outdoor space but which also adds value to modern living.
Sponsored
French doors

French doors

Lomax + Wood Limited

Beautiful timber French doors made-to-order incorporating full height glass or panels, creating an elegant balcony or garden doorway. Made-to-order timber French doors ideal for conservation areas and new build projects. The doors are supplied with espagnolette locking, latch, mortice dead lock and door handles. Factory hung on hi-load lift off hinges with hinge bolts as standard. Operating and slave leaf provided with handles and espagnolette locking.
Sponsored
Ecophon Combison A dB 42

Ecophon Combison A dB 42

Saint-Gobain Ecophon

Ecophon Combison dB is the fastest and easiest way to combine features for both sound absorption and sound insulation between rooms. Ideal for installations where the partitions do not extend all the way up to the soffit. Combison dB can also help to reduce vertical noise from floor to floor. The panel is easy to handle, install and demount and it has a visible grid system. It is made from crimped glass fibre and has an Akutex FT surface on the front.
Sponsored
Cembrit Patina Inline

Cembrit Patina Inline

Swisspearl

Cembrit Patina Inline 'A' fire rated facade panel comes with all the qualities of the Patina design line: the strength and durability of the fibre cement. The beautiful patination over time and a natural expression. But the story doesnt end there Linear-milled indentations in the board provide character and depth to the building and add a unique playful shadow effect as day light moves across the building. Patina Inline is the choice for those who truly believe that a building is born to be alive.
Sponsored
CS Explovent Explosion and Pressure Relief Systems

CS Explovent Explosion and Pressure Relief Systems

Construction Specialties (UK) Ltd

If your facility is one where potentially explosive atmospheres, materials or processes exist, you know that it is critical for your buildings pressure venting system to perform according to its design parameters as a means of limiting damage in the event of an explosion. With CS Explovent® Wall Vents you can field test the release parameters for the explosion vent panel at any time. The system is re-settable, compliant with ATEX 95 and meets the guidelines of NFPA 68 and FM 1-44.
Sponsored
IMOLA TIMBER PARTITION

IMOLA TIMBER PARTITION

Forza Doors Limited

The Imola partition system is manufactured in the Forza Doors West Sussex factory producing Forza doors ,frames ,fire screens and veneered panels . The Forza team are thus able to produce a fully co-ordinated project component delivery that recognises project lead times as crucial and when site events compress the completion schedule are able to support fast track demands. Performance characteristics available are FD60/60 and acoustics 54dBRw(mullion ) / 45dBRw (glass to glass joint) .
Sponsored
RENZ Plan Brochure

RENZ Plan Brochure

The Safety Letterbox Company

Conspicuously inconspicuous: The RENZ PLAN S generation of innovative mailbox units. Redefining mail boxes minimalist, restrained, flush-mounted, completely integrated in the building or adapted to the façade. Alongside mailbox models for integrated door panels, RENZ PLAN S is now also available as a surface mounted or flush-mounted unit, as a through-the-wall unit and also as a pillar. RENZ PLAN S comes in perceptibly solid V4A stainless steel with a sophisticated brushed finish or also in coated steel.
Sponsored
Yeoman Shield Wall & Door Protection Product Brochure

Yeoman Shield Wall & Door Protection Product Brochure

Yeoman Shield, trading name of Harrison Thompson & Co Ltd

Yeoman Shield's wall & door protection products brochure showcases the whole range of protection products which includes, protection rails, protection panels, wall protection, door protection, corner protection angles and heavy duty fenders. Available in a range of profiles and colours the Yeoman Shield wall & door protection systems will have a solution to prevent impact damage to interior wall and doors caused by the everyday movement of people and wheeled equipment such as hospitals beds and motorised carts.
Sponsored
Knauf Ceiling Solutions Heradesign Alpha +

Knauf Ceiling Solutions Heradesign Alpha +

Knauf Ceiling Solutions Limited

HERADESIGN® – the brand for high-quality acoustic solutions made of magnesite-bonded wood wool panels from Knauf Ceiling Solutions. The precise synergy of sound absorbing HERADESIGN® ceiling and wall areas creates pleasant room acoustics. This is becoming more and more important in offices and educational facilities, healthcare institutions and all buildings with high noise levels and visitor frequency. Rooms with optimally balanced acoustic properties enhance the well-being and boost the ability to perform and concentrate.
Sponsored
Topakustik Classic 28/4 M or T

Topakustik Classic 28/4 M or T

Acoustic Products Ltd

These grooves are the ideal solution for standard absorption requirements. As with all centre-to-centre distances, the wide grooving also comes with 2 mm, 3 mm and 4 mm grooves. Check out the 28/4 and the 30/2. The advantages of this type of panel include the beautiful design and good absorption. They are ideal for example on the ceiling to reduce low frequency issues. Very highly valued by customers. Planks can be easily installed with tongue and groove edges. FSC certified, with EPD, HPD, VOC, Fire and Acoustic certifications.
Sponsored
Delta-MS Installation Information

Delta-MS Installation Information

Delta Membrane Systems Ltd

Installation instructions for the Delta-MS range are given in a two-page leaflet from Delta Membrane Systems. Clear and concise information is given on how the product is fixed facing the building. The material may be applied directly to compression-resistant waterproofing such as bitumen coatings or mineral sealing slurries, waterproof concrete, or insulation panels. The information on the correct method of installation saves time for the fitter and eliminates any risk of failure. Details are given on how the sheets are to be applied, the overlap demands, and the recommended fixings used for effective installation.
Sponsored
Harlequin WoodSpring

Harlequin WoodSpring

Harlequin Floors (British Harlequin plc)

Harlequin Woodspring is a wooden sprung floor system that is a modern update of the traditional ‘basket weave’ construction. It has a counter batten configuration, comprising a triple layer of custom machined southern yellow pine arranged at right angles. Shock absorption and energy return are enhanced by dual-density elastomer blocks attached at predetermined intervals to the underside. Layers of flexible MDF and plywood panels are installed on the battens which support the chosen Harlequin performance top surface. Harlequin Woodspring is suitable for all genres of dance.
Sponsored
MEDITE MR (Moisture Resistant) MDF - Designed for use in humid conditions

MEDITE MR (Moisture Resistant) MDF - Designed for use in humid conditions

MEDITE SMARTPLY

MEDITE MR is a moisture resistant MDF panel designed for use in humid conditions in accordance with MDF.H (Option 1) as defined in EN 622 part 5. It is successfully used for kitchen and bathroom furniture, architectural mouldings, skirting boards, architraves, window boards, flooring and general interior joinery. The consistent high performance and quality of MEDITE MR ensures its suitability for machine profiling. Potential LEED® 2009 credit support: MRc4,5,7 Potential LEED v4 credit support: Materials & Resource

Showing 1045-1080 of 1089

Feedback