"rubber panels slabs"

Location: Bexley, Greater LondonProject Type: EducationalDevelopment Cost: £1.1mProduct: Curved Plain Fascia with THX Soffit PanelsMeridian Wall CopingShadex 260 Drop-in Cassettes (Structural Steel Supports)Contemporary Rainwater Pipes​Finish: Syntha Pulvin RAL 7011 Matt Iron GreyFire rating: A2 s1, d0 Non-combustible (Reaction to Fire EN BS 13501-1:2018)Client: Beths Grammar School, BexleyArchitect: Ingleton Wood ArchitectsMain Contractor: Horizon ConstructionSub Contractor: Specialised Fixings of Ipswich

The FA wanted only the best for its highest-profile ‘social pitch’ at St George’s Park, its new centre of excellence in Staffordshire, opened in October 2012 by the Duke and Duchess of Cambridge – FA President Prince William wife, Kate.The fence at Pitch No 2, the David Beckham Pitch, needed to take sponsorship and branding and keep rattle and noise to a minimum. The FA also wanted to fit in with the landscaping of the National Forest in which the centre sits.The SolutionThe system had to be in keeping with the environment – even down to surfacing the pitch surrounding the same golden colour as the car parks. In addition, it needed to limit noise impact on neighbours and cause minimal disruption to pitch use during installation as the fencing went in after the pitch.They chose a quality system that will last on this high-usage pitch at heights of 2m and 5m with EPDM inserts to insulate the fence panels from the posts to reduce noise during impacts to 72dB compared with the 93dB of wooden panels.Zaun designed its Super Rebound to take branding and sponsorship signs and fencing to remain robust even in brisk winds when the graphics can threaten to act as a ‘sail’.The installation, which is around a pitch that is primarily used by the public rather than for England training, carriesZaun’s industry-leading 12-year product guarantee.Zaun worked closely with East Staffs Borough Council on planning consent and with the St George’s Park groundsmen and facilities team to complete a tight programme of works on the £105m complex on budget and in time for the royal opening.

Built in 1957, St Cuthbert’s is one of the oldest Secondary Schools in St Helens, and was the first Catholic Secondary Modern to be built since the war. The distinctive main elevation of the school appears largely as it did nearly sixty years ago, but over-all the school’s buildings have increased over the last half century to accommodate increased pupil numbers and more facilities. Last year, Twinfix were approached by BPL Construction to design, supply and install an enclosed free-standing mono-pitch canopy at the school, which would provide additional space for dining, a popular choice for schools looking for a cost-effective alternative to traditional extensions, allowing them to utilise their outdoor areas and provide additional covered space. The canopy covering a total of 129 square metres, manufactured from rust-resistant aluminium and powder coated to RAL 9004 signal black comprises of our innovative Multi-Link-Panel NF roof-glazing system, glazed with 25mm opal polycarbonate. Coloured vinyls were attached to some of the side panels to brighten up the structure and tie in with school branding. Mrs Twist, Head Teacher at the school commented: “We are extremely impressed with the quality and design of the canopy. The onsite team have worked in close proximity to our students and have taken full account of their health and safety.” The addition of the side glazing and doors add extra protection from the elements, making it a usable space throughout the year and a secure area for storage of equipment.

Bradstowe House is a fascinating opportunity to not only rescue a historic building but also do it in such a way that will make the property sustainable. When Comer Homes decided they wanted their piece back after experiencing one too many economic downturns under this roof (pun intended), what came up wasn’t anything short of astounding: The long-abandoned concrete frame had become nothing more than dust and decay; its glory days are forgotten — until now!Bradstowe House, designed by Comer Homes’ UK in-house architects is a contemporary landmark for Harrow. The building’s curving glass and steel form give way to ample underground parking as well the rooftop terraces which make this development an iconic example of modern architecture that can be found anywhere from London city all too small towns across England!Bradstowe House offers a diverse range of rental apartments that are designed to suit your needs. With modern kitchens and fully integrated appliances, our high-quality homes offer the perfect space for gatherings with family or friends alike!The old cladding of the building was very outdated and it required a lot of maintenance. The new planning permission allows for an aluminium panel (Valcan VitraDual) curtain walling system, which is much more durable than granite panels while also having better insulation qualities!Valcan supplied and delivered approx. 4100m2 of Valcan VitraDual in Cornish Granite & Riddle Grey.

The Director of Tiptoes Day Nurseries required weather protection structures at a number of their locations in Hull, East Yorkshire and one of those locations was Tiptoes Nursery in Willerby in Hull.Upon completion of the site survey we could see that the Coniston, which they originally chose, was the perfect solution for the area they were looking to cover. It was advised that due to the size of the canopy and to provide added protection from driving rain, that they add infill panels to either side of the canopy. Infill panels are a cost-effective addition to the Coniston yet makes a substantial difference.The Coniston is a popular canopy within educational settings as it provides protection from all weathers including the rain, the sun’s UV rays and the heat from the sun, providing a cooler area underneath, and cooler classrooms that have windows where the canopy is situated.To save on costs, we suggested that the projection could be reduced slightly without causing a big impact on the size of cover required. However, a 5-metre projection was a must have for the nursery because they had existing softplay flooring in place and wanted the canopy to cover the width of the spftplay for a seamless finish. Although this impacted the cost, it was worthwhile as you can see in the photos it looks like the flooring and canopy were a part of the same design.The canopy was installed within 4 days as scheduled and went ahead with no issues along the way. The staff at the nursery were pleased with their canopy which covers 114.5 square metres and can now make use of outdoor play and learning all year round, benefits both the staff and children in their care.

Castell High School in Flintshire supplies co-education to 1300+ students promoting strong levels of well-being.The original school building was established in 1958 and as the student intake grew extensions were built in 1974 and 1992 to accommodate.2021 saw the latest extension, Y Celtec building, completed. Problems soon became apparent with the walls within the new area being clean and damage free.The school’s Site supervisor, Paul Muncey explained “Keeping the white painted walls clean was becoming a nightmare for our cleaning team and within 12 months of the building coming into use the walls along the corridors required repainting.”Business Manager Emma Manning had come across Yeoman Shield wall protection solutions in a previous position and got in touch with regards to protecting the new building’s wall before the impact damage became too great.Yeoman Shield directly employed fixing operatives installed Mid-Grey FalmouthEx, 2500 x 1250 mm wall protection panels along the corridor walls.The panels once in place not only protect from damage but are easy to clean down and will prove over the years to reduce repair and maintenance costs. They also look good sustaining a bright, clean, and welcoming environment for staff and pupils at all times.Paul Muncey concluded, “I was very pleased with the quality of work provided by the Yeoman Shield installers who showed consideration to the environment that they were working in.”

From the beginning, architects DLR Group designed Metea Valley High School in Aurora, Illinois, to light up education, both literally and figuratively. The sprawling campus with room for 3,000 students is broken down into a handful of more intimate, human-scale learning spaces, called “think tanks”, where interaction with faculty is encouraged. Two interior courtyards, open to the sky, offer fresh air during free periods. Shaped a bit like a bow tie, Metea combines three concepts – mind, in the midsection, and body and soul on either end – to offer students a truly 21st century school experience.Lighting up Metea in the literal sense comes largely from the extensive use of Kalwall translucent curtain wall throughout the school. Upon coming through the school’s main entrance, visitors are struck by the cheerful, airy, daylighted lobby. Controlled daylight also pours into the school’s innermost areas, traditionally a structure’s darkest, from the courtyards. Kalwall introduces daylight into the vast commons area that serves as the students’ lunchroom. In the gymnasium, Kalwall’s shadowless, glare-free light enhances ball handling in team events; sunlight does not glance off the shiny court surface. The diffuse-light-transmitting panels also prevent glare off computer screens, easing eyestrain. And in a dramatic demonstration of Kalwall’s superb flexibility, the design includes occasional, narrow, horizontal runs of clear glass – some serving as clerestories – adding visual interest as well as clear views to the outside.At 464,000 square feet, Metea could have been an energy-consumption nightmare, adding significantly to its $125 million total project cost. But innovations such as demand control ventilation, energy recovery wheels, and high efficiency boilers will save Indian Prairie School District 204, the state’s fifth largest, thousands of utility dollars every year and pay for themselves in just a few years. In fact, the building’s design is targeted to be 19 percent more efficient than ASHRAE 90.1 requires. Because translucent Kalwall admits so much controlled daylight, the school’s exterior light harvesting system, which monitors indoor light levels, can actually turn off electric lights in public spaces automatically when they are not needed. The harvesting system alone is expected to save the district over £16,000 a year in operational costs with a payback of under seven years.Illinois can get very cold in the winter and quite toasty in the summer. Highly insulating Kalwall helps there, too, keeping temperature extremes outside and lessening the need for and cost of heating and cooling. During the manufacturing process, standard 2-3/4” and optional 4” Kalwall sandwich panels can be infilled with various densities of specialized, translucent insulation. Architects and designers can achieve a thermal insulation value of up to R-20 (0.05 Btu/hr/ft²/F).At Metea Valley High School, DLR Group chose to include Verti-kal™, a unique design variation on the standard shoji or square grid layouts of Kalwall Translucent Systems. The panels incorporate internal, continuous supports to provide a vertical emphasis. As with all Kalwall translucent systems, Verti-kal distributes diffused daylight throughout the school, even on cloudy days, drastically reducing the amount of artificial lighting required and eliminating shadows and glare as well as stark contrasts of light and shade. Verti-Kal can be supplied in panels up to 5 ft. (1.5 m) wide and up to 12 ft. (3.6 m) high, minimizing the number of joints. The unique format creates an entirely different look while still utilizing the most highly insulating, diffuse-light-transmitting, structural composite technology.Any school system must concern itself with maintenance costs, and Kalwall excels there as well. The panels are vandal-resistant and self cleaning; dirt simply washes off with each rainfall. After dark, the diffuse, translucent properties of Kalwall contain interior lighting and prevent direct-beam light pollution. Instead, the exterior surface of the building simply glows beautifully, boosting Metea Valley High School’s aesthetics and welcoming both students and the surrounding community to a true masterpiece of daylighting.Photography: James Steinkamp

300 m2 of Optima XTR Contour in 6063 T6 Aluminium Extrusion and 3000 m2 of Optima TFC+ in Aluminium 3103 Grade has been used in the completion of Bromley-by-Bow in East London.Bromley-By-Bow is a visually striking array, comprised of five high rise residential blocks with community spaces and commercial areas at ground level.Sotech’s newest system innovation – XTR Contour – was chosen as it allowed the design team to mimic the pre-cast concrete fluted panels in a consistent manner.In order to form the fluted decorative areas below the windows, a new extrusion profile was developed – XTR Contour Concave. The profile of the design was a copy of the pre-cast concrete façade panels which are fluted in the same general locations.Whilst systemised testing wasn’t carried out on this project, the design team invested significant time in 3D printing profiles to prove concepts prior manufacturing the physical die. This saved time and money in the overall project scheme.Mohamadrez Jenaban, Technical Lead at Sotech “I have undertaken a number of simulation analyses for this project to ensure panel safety, adequate performance and stability under the given conditions. We were able to determine 1- number of stiffeners required for these panels to keep deflection below CWCT recommendation 2- the maximum fixing span to keep the stress below the material permissible stress value”. The main challenge on the scheme was implementing a cap to the XTR Contour profiles upon the request of the Fire Engineer. On such a shallow profile this is challenging as there is little room for any form of fabrication works. In response to this challenge, we therefore developed internal screw ports within the extruded profile. This allowed us to mechanically fix plates to the head and the base of the profile and conform the Fire Engineer’s requirements.Sotech’s was able to provide key advice and guidance in the creation of the XTR profile, as well as key guidance on how to rationalise the arrangement to standardise die quantities, shape and size.TESTIMONIALSJamie Smith, Commercial Manager at Sotech: “The extrusion process has some restrictions and requires knowledge of the extruding process to determine what can be manufactured through a die. Flow rates of aluminium, hollow elements and wall thickness all play a significant part in the final die composition. Sotech’s technical team are able to remove the risk to the client and advise on what is physically capable, saving time and money through failed dies.”“The Optima XTR Contour – Concave systems gives an aesthetically pleasing visual and the powder coating enhances the system giving more definition to the fluting vs the contrasting brickwork surround. Our Optima TFC+ system, finished in Axalta Textured Powder to the recessed balconies, mixes well against the pre-cast concrete. The discrete fixing of the system is perfectly suited for this type of application when secret fixing systems by be burdensome in confined spaces.”Reece Barnes Commercial Director at Alliance Facades said: “Bromley-by-Bow is our flagship project and largest to date, providing over 500 homes, and requiring over 3,000m2 of rainscreen cladding…We worked closely with Sotech to deliver phases 1 and 2 of the mixed-use development, selecting the Optima XTR Contour and TFC+ range respectively.“XTR Contour was the perfect solution for the scheme as it’s extremely hardwearing and versatile, and enabled us to conform to the fire engineer’s requirements. The design team at Sotech proved themselves again and again in the way they rose to the challenges of this scheme and found innovative solutions. The project looks fantastic – well done everyone!”

The waterproofing to a large residential flatted development in London was carried out using the Koster TPO membrane.This warm roof design incorporated the Koster TPO Fleecebacked membrane mechanically fixed through PIR insulation, Koster Vapour Barrier and into the timber substructure as per the wind load calculation.An interesting project with many challenges that were all individually designed by the Koster technical team in collaboration with the project architects.The final roof incorporates hard standing areas, sedum and green roof sections, a solar panel farm and decorative stones.A beautifully deigned and usable area providing residents an amazing view over London.

Howe Green has supplied around 400 bespoke access covers to the £150 million National Automotive Innovation Centre (NAIC) being built on the University of Warwick campus. The floor access covers were required to provide safe and easy access to building services concealed under the raised flooring. The bespoke 7500 Series Medium Duty Stainless Steel covers were specified by award-winning architects Cullinan Studio. A reduced depth was required to enable the access covers to be infilled with the same flooring used elsewhere in the raised floor system - calcium sulphate floor panels, with the stone pre-bonded

The redevelopment of Whitechapel Station in London has become the latest construction project in the capital to feature bespoke cladding panels from Proteus Facades.The new and improved Whitechapel Station, designed by BDP Architects forms a key part of a seven-year construction programme for the new Elizabeth Line Crossrail route – a high-speed train and tube link that will connect the outer western edges of London to the outer east.Hailed as the biggest transformation of the London transport system in recent years, the route passes through 41 stations and stretches over 60 miles, from Reading and Heathrow airport, through central London then on to Shenfield and Abbey Wood.

The Riverside Resource Recovery Facility is the largest project of its kind in the UK. Waste from Central London is brought in by barge along the River Thames as well as by road - the creation of this pioneering facility is expected to make a significant contribution to London's landfill diversion targets.The building's design demonstrates the trend away from the bleak industrial structures of the past, towards aesthetically pleasing buildings that complement the local environment.Fixfast assisted with the creation of the distinctive 'swoosh' by providing unique powder-coated rivets to fix the curved and coloured panels to the face of the composite skin."Fixfast - all good"Andy Rolfe - Purchasing Manager at Lakesmere Ltd

Located near Taunton, Somerset, the Halcon Centre provides short breaks, with 24-hour professional care, for up to 18 adults who are physically disabled or have sensory loss. SureProtect Design® bespoke wall cladding was installed in the main corridor at the centre featuring a row of imitation panels, that have been designed to look hand-drawn with a marker pen to offer the homely feel the centre was looking for. In addition, the Halcon Centre further increased the corridor walls’ protection by installing Gradus’s CGH5090 High Impact PVC-u Corner Guards and WGS200 Wall Guards, both in colour Gravel.

Maple teamed up with award-winning architects to develop architectural façades for the 10-storey Stanley Street Car Park in Salford.  Architects AHR wanted to cloak the multi-storey in 3D hexagons, made up of individual ‘kite-shaped’ aluminium panels. Trouble was, they had only ever tried the design with paper.“Our design was a big ask,” admitted Dan Barnes, Regional Director of AHR, “but over a series of workshops and meetings with Maple, we turned what could have been a very complicated job into a simple bespoke system. I’m looking forward to working on other projects with them in the future.” 

Graves Health and Sports in Sheffield is a state of the art centre providing users with swimming, studio, gym, tennis, gymnastics and trampolining facilities. Prospec Marathon Conform Changing cubicles in Solid Grade Laminate and Cabrillant 700 Shower Cubicles, featuring Toughened and Laminated glass offer a more contemporary feel to the public change area. Prospec Marathon Laminate Wet lockers, with coin return locks and bespoke glass end panels, add an additional element complementing the quality feel of this first class centre. A range of accessible lockers are installed throughout the facility to ensure all users have complete access.

Our colourful Luminoso glass shower and toilet cubicles combine to create an energising shower and changing area for a new gym in the heart of London’s Victoria. The vibrant shower and changing rooms at Gymbox in Victoria feature our Luminoso glass shower and toilet cubicles, back-painted in a striking mix of bright oranges, reds and yellows to complement the bold tiling design. The cubicles feature high specification 10mm clear float toughened glass doors, partitions and division panels. We also installed floating Corian trough style vanity units with wall mounted taps and soap dispensers in the changing room area.

London Gatwick is the second largest airport in the UK.System M was recommended for its stylish design and durability to withstand the heavy footfall. It also has an emergency feature to access the toilet cubicles in less than 30 seconds. This patented system enables normally inward opening doors to be opened outwards, without having to break components or lift off the pilasters or doors.Integrated hand basin modules were specified for easy access for maintenance staff and a streamlined experience for users. The finish was completed with Clipclad wall panelling, pre-plumbed services and stylish mounted glass cladding.Read the full case study for more details.

“If you ask pupils what aspect of the facilities is their top priority for the school to improve, it will always be the toilets. We now have a space that is bright, colourful and looks smart. These facilities are great!” - Ian Parnaby, School Business Leader. The washroom area at York High School was a unisex block, which meant that privacy was a key priority when selecting their cubicle range. They also had to be smart, robust and easy to clean and maintain. With all this in mind York High School selected Centurion Full Height cubicles and Venesta’s pre-plumbed panelling system, Vepps®.For more details read the full case study.

Washroom created the distinctive washrooms on four levels plus the new staff shower and changing area in the basement, all designed with the industrial heritage of the building in mind. Washroom manufactured and installed the vanity units which comprise a Corian worktop, individual countertop basins and inset waste bins set on a custom-made black metal frame. Washoom's full height Alto toilet cubicles were manufactured with a high pressure laminate finish in white, which together with its black high pressure laminate Concerto integrated duct panel system behind the WCs and urinals, creates a contemporary monochrome effect.

Washroom's off-site service allowed the design to be carefully fine-tuned prior to installation on site for this prestigious office refurbishment project. Washroom's full height Alto toilet cubicle doors were specified with a real wood veneer finish, stained to match the solid Douglas fir timber panelling in the reception area. The bespoke polished cast concrete vanity units feature integral waste bins and Tego hinged mirror units above. For the new staff shower and changing room area Washroom's full height Alto FENIX shower cubicles were installed along with Z style Forza SGL lockers.

Location: Dubai, UAEThe Opus by Omniyat is an iconic residential, hotel and office building in Dubai’s Burj Khalifa District designed by Zaha Hadid which utilises an unusual volumetric design to stand out from its peers. The developer needed a replacement for drywall which produced less construction debris and achieved a 67dB acoustic rating with walls no thicker than 200mm.This was an extremely complex project which required bespoke elements from Specwall in order to succeed. As well as considering the curved walls, high acoustic requirements and luxury finishes, there was a specific requirement for unique, 2.7m cut panels to suit the building’s elevator space.

The 2019 Special Olympics Cauldron Abu Dhabi was designed and fabricated in Yorkshire by Stage One Creative Services Ltd. It was then anodised using a selection of colours from our Anolok Bronze range. The anodised panels were then air freighted to Dubai where they were installed to create this magnificent cauldron prior to the opening ceremony. Each county did their own text which was applied underneath the logo using our UnAtex process. The main aim of this project was to ensure the material would be A1 fire rated due to flames being projected from inside the cauldron, hence making fire rating imperative.

Working together with in-house joinery division, Cre8 Joinery Solutions, Washroom created new washrooms using a mix of different materials including dark wood veneer, concrete and bronze. The long trough shaped and wall-mounted, floating Arpeggio cast concrete vanity units in a traditional dark grey shade, reflect the industrial inspiration of the design, with the addition of black power-coated taps and soap holders providing a contemporary twist. The Cre8 joinery team delivered the bespoke lift lobby panels faced in exactly the same dark oak dyed veneer used on the full height Alto toilet cubicles installed in the washrooms.

Together with its in-house joinery division Washroom delivered a new basement shower and changing area, plus kitchenettes and storage for this redeveloped office. Forte SGL shower cubicles with satin anodised aluminium pedestal legs and 'D’ shaped headrail, were specified in dark grey. The spacious cubicles include a bespoke fold-down bench for extra convenience. Washroom installed bespoke white Corian solid surface vanity units complete with inset wastebin in the superloos. The team also crafted a bespoke oak staircase which runs on every level of the building and installed new oak slatted wall panels throughout to complete the design.

“Wow - the children are so excited to have new toilets. The school has had the same toilets since 1930 and they were in desperate need of replacing. The children now take pride in the facilities and love the wash trough hand basin. The impact on all children having nice facilities to use is amazing. The problem I have now is they don’t want to leave the washroom!” - Sue MacAskill, Marian Vian’s Facilities Manager The biggest challenge was the time constraints, due to school term times. Specifying our industry-leading pre-plumbed panelling system Vepps® helped reduce installation time by 50%.

We’ve created a striking new reception area plus contemporary monochrome superloos and a cycle change area as part of an office refurbishment. Each self-contained superloo cubicle contains a toilet and wall-mounted vanity unit, with the full height Alto toilet cubicle doors providing complete privacy for office staff. Manufactured in white high pressure laminate, the toilet cubicle doors were completed with matching Corian solid surface edging and black ironmongery to match the rest of the black washroom accessories. Washroom also delivered toughened low iron glass back-painted wall panelling for each toilet cubicle.

Washroom designed and installed unisex Superloos within a new shared workspace building. Each self-contained cubicle includes a toilet, vanity unit and hand drying facilities behind a full height cubicle door and are an excellent solution for an office where space is at a premium. Washroom's Concerto duct panelling, faced with shiny black brushed metallic effect high pressure laminate, was installed behind the toilets and underneath the sinks in each superloo cubicle. The vanities are manufactured from white Corian, set on a bespoke black metallic framework which also includes additional storage underneath as well as an inset waste bin.

Technical Manager Tim Spencer “The initial need was for an elegant high-performance ceiling grid that could span 2500mm and support the ceiling infill. The answer was a bespoke version of our Rockfon® System MaxiSpan™ grid. We were then briefed to find an acoustic solution to resolve the acoustic challenges for the spaces which would host a variety of music concerts. We worked in partnership with ROCKWOOL and the solution was bespoke 100mm thick Rockfon Color-all® black ceiling tiles in combination with 100mm ROCKWOOL FLEXI® overlay and 40mm thick Color-all panels together with 100mm or 160mm FLEXI for the walls.”

St Rollox church of Glasgow recently moved into a brand new, £2.5m community hub, with vibrant design and space flexibility at its heart. Partitioning experts Style was specified to install two semi-automatic moveable walls, allowing the main worship area to be opened out for large services or to be divided for smaller gatherings. The Activity Space can be subdivided to host different events including education and craft classes, exhibitions and concerts. Complementing the exciting interior décor, one moveable wall is double-glazed to maximise natural daylight whilst the other celebrates life, bringing sunshine into the space with brightly coloured solid panels.

This £21 Million project involved partial demolition, refurbishment and extension of the existing East Wing of the Student’s Union to create a spacious, modern and accessible mixed-use building. The stunning design by Shepheard Epstein Hunter, features a spectacular façade to the four-storey extension which fronts directly onto the University’s central square. Created using Senior’s thermally enhanced SF52 silicon glazed and fully capped curtain walling, with the innovative patented PURe® aluminium opening vents, the façade gives a light and spacious feeling to all four floors. Curved glazing and perforated panels add to the dramatic appearance.

The Dyson Institute has been established with the ambition of being the best higher education engineering institution in the world. The campus radiates around the two-storey Roundhouse where 220 panels of Rockfon Eclipse® ceiling islands are installed. Rockfon Eclipse is very versatile and can be hung from several kinds of structures where traditional suspended ceilings cannot usually be installed. World leading architectural practice Wilkinson Eyre designed and oversaw the project. Hannah Richmond, “We chose Rockfon because we were looking to construct a floating, acoustic ceiling and found the Eclipse system to be the best product to realise this intent

Creating a fluid environment to encourage collaborative working, partitioning experts Style, designed and delivered a unique and highly innovative ‘working wall’ solution for Adobe’s new offices in the landmark White Collar Factory building, Shoreditch. The cluster of individual sliding and pivoting wall panels can be used to create numerous sized spaces for impromptu meetings and brainstorming sessions. They can also be pulled together to form a wider temporary wall. Delivering further flexibility, Style installed a fully automatic, Skyfold vertical-rising partition capable of delivering 55dB acoustic privacy, as well as a semi-automatic DORMA Moveo double-glazed operable wall.

ROCKFON has successfully worked together with Global Contract Interiors, Kier Construction and Architects Seymour Harris, to establish a fully compliant range of acoustic solutions that meet the required performance specifications at the new Phoenix Academy in Telford; built as part of the council’s Building Schools for the Future programme. Around 2,000m² of ROCKFON products: Rockfon Scholar and Samson wall panels; Rockfon Contour suspended baffles; and Rockfon Alaska suspended raft islands, were installed throughout the school to improve acoustic sound absorption – particularly in areas where the school design meant that traditional suspended ceilings were unable to be installed.

Moveable walls are a vital resource for the hospitality sector as they immediately enable businesses to increase revenue by using the same space for more events. Clearly demonstrating how a partitioning system can offer an excellent return on investment, Crown Banqueting, a lavish Asian wedding venue, recently worked with operable wall specialist Style to design and install a sophisticated partitioning system to their expansive event space. Delivering excellent acoustic privacy between divided areas, the sliding wall panels can be quickly manoeuvred into place, allowing Crown Banqueting to successfully cater for up to 700 guests split between two separate areas

SAS International collaborated with architects TP Bennett to deliver metal ceiling solutions to meet CBRE’s unique demands on this CAT B fit-out. SAS330i LED noggin lights were selected to provide a seamless butt-joint solution between panels and gridwork. This effect ensures there are no gaps between light and ceiling. Manufactured from extruded aluminum profiles, each light was polyester powder-coated at SAS’s factory to ensure flawless colour consistency across the space. Delivering a complex fit-out on time and to specification, SAS delivered a striking feature ceiling that has transformed the office space for the client.

This iconic project was an exciting one for Shadbolt and we worked closely with the Architect to hand select the FSC certified SG American cherry needed for this job. Control random matched veneered panels, doors and doorsets would be made from the veneer selection so, our expert craftsmen created a seamless scheme from floor to floor. We also supplied “Signal White” RAL 9003 paint lacquered doors that required FD30 & FD60 rating which we achieved with our unique Shadmaster solid laminated timber core, which also allowed these high performance doors to also be sound attenuating and FSC certified.