NBS Source
I'm a manufacturer

"roof decking other materials"

7,970 results found

Sort by:

Showing 253-288 of 899

Sponsored
O2 Arena

O2 Arena

ROCKWOOL Ltd

The O2 arena's roof needed state-of-the-art acoustic engineering to eliminate virtually all nuisance ambient noise (bass thumping) outside the arena contributing to fantastic acoustics inside the structure.The complex roof design featured several layers of different density barrier materials to deaden even the lowest bass frequencies, all carried on special acoustic deck structures. The structural deck troughs were filled with ROCKWOOL RW4 insulation, with ROCKWOOL Acoustic membrane over and a 50mm Rigidal intermediate deck.
Sponsored
Residence benefit from a flame-free roof installation

Residence benefit from a flame-free roof installation

Iko Ireland

Hundreds of homes have been refurbished as part of a multi-million pound revamp of housing association properties.Tristar Homes spent £8m on the scheme at Kennedy Gardens in Billingham where they carried out work on 225 properties across the three housing blocks as well as creating 12 new one and two bedroom homes which have been made available for rent.The development, completed in September 2014, includes the fitting of new windows, new bathrooms and improved living space due to the new balcony extensions.The roof area before its refurbishment had a U-value of 0.4 W/m²K. This existing build-up would not have met the requirements of the current building regulations Part L.The lower roof had been overlaid at least twice since its original construction. In all but one core sample, the existing insulation was wet through and therefore it was apparent that 90% of the existing roof build up needed stripping to the original asphalt. A further inspection was needed when the asphalt was exposed to ascertain the condition and depth of the asphalt. The asphalt was deemed in reasonable condition so the new system could be installed onto the original asphalt.IKO worked with installing contractors BriggsAmasco to refine the roof specification and recommended IKO Mach One single layer bituminous membrane system, installed to the recommendations of wind uplift calculations and performing to a 0.18U value as per requirements.IKO Mach One membranes are a robust, flame-free, single-layer roofing system with added fire-retardancy. IKO Mach One can be mechanically fastened, ballasted or bonded with polyurethane adhesive.A 20-year insurance-backedfire retardancy guarantee was issued to cover all materials, design and workmanship covering contractor insolvency.
Sponsored
Neaco decking provides innovative cycle park at cutting edge offices

Neaco decking provides innovative cycle park at cutting edge offices

NEACO Ltd

Neaco’s Techdek aluminium decking has been specified for an innovative internal cycle park at the XYZ building, a cutting edge workspace in Manchester designed by Cartwright Pickard. Robert Phillips, Associate at Cartwright Pickard, said: “We specified Techdek for the cycle ramp due its robust construction and the simplicity of its design – the modular nature of its construction, its excellent drainage capabilities and the ribbed profile for surety under foot. Its track record of being used on similar, high profile projects gave us the confidence that the product was suitable for the application.”
Sponsored
Metal Roof Coating - Merlin Grey

Metal Roof Coating - Merlin Grey

Liquasil Ltd

This metal roof in Warwick was suffering from cut-edge corrosion, delamination of the factory finish, and spot corrosion.The specification called for a full liquid roof coating in Merlin Grey, which Liquasil was able to supply for installation by Nadco Roofing Services. Liquasil's Metalseal can be made in any RAL or British Standard colour to suit the client's needs.After the corroded surfaces had been prepared back to bare metal and the substrate had been jet-washed and dried, a single coat of Metalseal was applied to the entire roof at a wet film thickness of 350 microns.Despite the steep pitch of the roof, runoff was not an issue; the product stuck to the roof and did not drip, leaving a consistent, glossy finish that left the whole roof looking like new.Metalseal can be made in more than just the standard goosewing grey - if you have an industrial roof that needs coating, Liquasil can meet your needs - no matter the colour.Give us a call on 0121 709 5352, or email us at info@liquasil.com.
Sponsored
Asbestos Roof & Cladding Refurbishment Coating

Asbestos Roof & Cladding Refurbishment Coating

Liquasil Ltd

The finish to the asbestos roof and asbestos cladding on this property was faded and the roof leaked in several places, along with the gutter. Liquasil's silicone roof coating, Asbestoseal, was chosen to seal the roof and dramatically improve the aesthetic appearance using specially made RAL colours to the match the original finishes. The asbestos cement gutter was also lined with the Liquasil liquid gutter liner to form a permanent, bonded solution.
Sponsored
Metal roof coating project in Leicestershire

Metal roof coating project in Leicestershire

Liquasil Ltd

Failing factory finishes and cut edge corrosion were present across the entire roof and Liquasil's Metalseal metal roof coating system was specified as the most appropriate solution. The roof was cleaned and all failing finishes and rust was removed as far as reasonably practicable. The roof was then coated. In this case, two colours were employed. Liquasil is the only company able to produce silicone coatings in any RAL colour.
Sponsored
Green Roof - The Liner Apartments Falmouth

Green Roof - The Liner Apartments Falmouth

Sika Limited

Luxury coastal apartments able to withstand the elements with Sika roofing system. Owing to its beautiful coastal location, The Liner, a nautical-inspired £35 m residential new-build in Falmouth, presented a compelling roofing challenge. Exeter-based roofing contractor, Progressive Systems, assisted by Sika, took on the task, installing a roof to withstand the harsh seaside conditions with an immaculate finish.Green roof composed of:Sika® Sarnafil® G410 18EL PVC Single Ply Waterproofing Membrane.Sarnavap® 5000E SA Vapour Control Layer.Sarnafil® Primer 610.Sarnatherm® ‘G’ insulation.Sikalastic® 625.Sarnafil® G445-13 PVC Protection Sheet.Sika® Green Roof System.
Sponsored
Cambridge University Botanical Gardens | Commercial Non-Slip Decking Case study

Cambridge University Botanical Gardens | Commercial Non-Slip Decking Case study

Gripsure (UK) Ltd

Gripsure non-slip decking made from Accoya® wood was specified for the Rising Path Project at Cambridge University’s Botanic Garden. The Rising Path is one of the gardens’ biggest horticulture projects. It revitalises the three-acre Systematic Beds, which were first laid out in 1845. The striking structure offers visitors new ways to explore plant taxonomy. The 65-metre-long spiral structure was designed by Chadwick Dryer Clarke as a gently sloping path stemming off from the gardens’ existing path network. The path leads visitors to a viewing platform with a three-metre vantage point from which the full layout of the Systematic Beds can be enjoyed. The structural frame is formed from galvanized steel with the majority of the structure built from Accoya® wood, which was selected for its durability, stability and clean aesthetic. To ensure safe access all year round the walkway and stairs needed to be slip-resistant. We supplied over 1,300 hundred linear metres of Gripsure non-slip decking made from Accoya® wood, backed with our ten-year non-slip performance guarantee. Along the pathway are sections of landing points that highlight some of the plants’ significant evolutionary innovations, which allowed them to leave the water for life on land. At these points, Gripsure Graphics non-slip deck boards were supplied to create custom typographics. The boards needed to provide a visual contrast to the main decking as well as displaying information for visitors. Project architects Chadwick Dryer Clarke and Designmap (whose design was inspired by the work of the artist Gordon Young) developed the graphic design of the boards. A representative from Chadwick Dryer Clarke said “Gripsure’s approach was positive and collaborative, with a real interest in supporting the design team and project. A number of prototypes were developed that refined the depth, size and edge clarity of lettering, and the successful result has a crispness and quality that exceeds the design aspirations.” The Rising Path is a well-crafted and elegant structure which enhances the experience of the Systematic Beds which are of global heritage significance. It has had very positive feedback from visitors since its opening.
Sponsored
Asbestos roof coating project in Haverhill

Asbestos roof coating project in Haverhill

Liquasil Ltd

This was the first asbestos roof coating project undertaken with Liquasil products, back in 2013. The roof was heavily soiled and was cleaned using a DOFF steam cleaning machine, delivering 150°c steam to completely kill moss and lichen spores. The metal fixings were treated with Liquasil's corrosion primer and sealed with Non-Sag Sealer before the whole roof was coated with Asbestoseal, the only BBA Approved asbestos roof coating.
Sponsored
AliDeck make site visit to inspect installation of non-combustible aluminium terrace deck at Bermondsey penthouse apartment

AliDeck make site visit to inspect installation of non-combustible aluminium terrace deck at Bermondsey penthouse apartment

AliDeck

The AliDeck team enjoyed another site visit up in the Big Smoke today as we travelled into London to take a look at an ongoing project that is using AliDeck aluminium decking.
Sponsored
Permanently fixed roof ladder system – Ascent Aluminium Roof Steps ; Sheffield Aerospace Manufacturers.

Permanently fixed roof ladder system – Ascent Aluminium Roof Steps ; Sheffield Aerospace Manufacturers.

Safety Fabrications Limited

The Ascent Aluminium Roof Access Steps were specified to meet the clients requirement to create a safe access route up & over the “saw-tooth” roof for maintenance personnel. In this instance the Ascent steps were specified for use with an adjacent MSA Latchways climb-latch fall protection system. If collective protection is required handrails can be supplied to one or both sides of the steps. The Ascent Aluminium steps were specified for this project by Eurosafe Solutions Ltd a specialist fall protection company who also installed steps. The Ascent Aluminium walkway steps are tested for use on the aluminium standing seam roof and are secured back to the roof sheet using a proprietary support clamp. The Ascent aluminium walkway is designed in accordance with BS EN 516:2006 Prefabricated accessories for roofing, BS 4592, Industrial Type Flooring and stair treads, BS EN ISO 14122-3 Stairs, stepladders and Guardrail, BS 7976-2:2002+A1:2013 Pendulum slip resistance. And is manufactured under ISO 9001 and CE 1090 factory production control procedures, creating a walkway that is CE / UKCA compliant.The walkway steps can be configured with a handrail to withstand a loading of either 0.36 kN (general duty) or 0.74 kN (heavy duty) and can be supplied with an optional toe-board if required. The system can achieve these loadings without the need for additional bracing, allowing the walkway to be placed against the area to be accessed. UKCA / CE marked. Designed & Tested in accordance with BS EN 516:2006 Class 1 Type C. Designed & Tested in accordance with BS EN ISO 14122-3:2016 where a handrail is fitted. Designed & Tested in accordance with BS 4592-0:2006+A1:2012 for loadbearing and BS 7976-2:2002+A1:2013 for anti-slip. With or without handrail.Standardized modular system roof walkway system. Can be supplied with a range of fixing kits to suit different roof profiles.
Sponsored
Asbestos roof refurbishment coating in Preston

Asbestos roof refurbishment coating in Preston

Liquasil Ltd

This complicated asbestos roof structure was heavily soiled and leaking in numerous places. Asbestoseal was specified because it is the only BBA Approved asbestos roof coating on the market. The roof was cleaned using 150°c steam, which kills all moss and lichen spores on contact, leaving a perfectly clean substrate for coating. The success of any coating comes from its preparation and Liquasil teaches all of it approved installers various cleaning methods. The roof was coated and is now leak free with a much extended life expectancy.
Sponsored
Metalseal Metal Roof Coating - Lichfield

Metalseal Metal Roof Coating - Lichfield

Liquasil Ltd

This 4,000 square metre roof in Lichfield, completed by Projects UK Ltd, was in need of refurbishment and Liquasil's BBA Approved Metalseal 20 was specified for its 20 year guarantee against manufacturing defects. The roof was cleaned and the cut-edges were treated with our unique SWT corrosion primer before a single coat of Metalseal 20 was spray-applied to the roof to provide a protective and decorative finish leaving the roof sheets looking like new.To get in touch, call our team of Building Surveyors on 0121 709 5352.
Sponsored
Metal roof coating, Watford

Metal roof coating, Watford

Liquasil Ltd

A roof at teh Jaguar Land Rover premises in Watford was in poor condition and suffering from cut edge corrosion. All of the loose and flaking factory finish was removed using 4000psi pressure washers and the rusted end and mid-laps were ground back to remove the rust. The cut edge corrosion was treated with Liquasil's corrosion primer and the entire roof was coated using the BBA Approved Metalseal.
Sponsored
Sliding-Over Fixed Rooflight Maximises Light In Mansard Roof Extension

Sliding-Over Fixed Rooflight Maximises Light In Mansard Roof Extension

Glazing Vision Ltd

After a particularly contentious and protracted planning process, this semi-detached, red-bricked house, part of a group of five properties that form Regent’s Mews in affluent London NW8, finally boasts an impressive third storey extension as a result of the erection of a mansard roof.The new dormer windows to its front aspect lend this 1980’s property a delightfully modern aesthetic, whilst the provision of a green roof to the rear aspect underlines its eco-credentials. The installation of Glazing Vision’s elegant sliding-over fixed rooflight above the stairwell, together with 4 additional fixed rooflights, has maximised the light streaming into this new living space, and also provided an all-important source of ventilation.Initial proposals to convert this house from two to three floors were rejected way back in 2001 by the local Planning Department on the grounds of it being “visually intrusive, overbearing massing not part of the existing architectural language and overlooking neighbours”. These same considerations faced Robinson Leigh Architects, whose track record of successful planning application had led to their appointment in 2013 by a client keen to find a solution to the planning impasse.There were a number of challenges for the architects, as they sought to design a scheme that would prove more successful through planning. The house is situated in St John’s Wood Conservation area, where restrictions on the character and appearance of all buildings are strictly applied. Normally any roof extension in this area would not be permitted and the house, indeed the entire mews, had been identified as an “unlisted building of merit”. Consequently the planners insisted that all new work to the house “must match existing original work in terms of choice of materials, method of construction and finished appearance in order to maintain the cohesion of the mews.The variety of roof forms in the mews, however, presented an opportunity for the architects to put forward their proposal of a flat-topped mansard roof as “a modern interpretation of the surrounding architectural precedent” said Leigh. Critically, the new mansard roof would also not add height above the general roof level of the neighbouring properties in Regent’s Mews, and thus would not be visually intrusive. The design of the three new dormer windows at the front of the house did depart from that of the dormer windows on the other mews houses though – they were square in contrast to the prevalent curved headed windows. However, given that they were really only visible from within the actual mews, the planners considered this alteration in form to be acceptable. Furthermore, the recessed glazing of the dormer windows ensured that the privacy of the occupants using the living spaces would not be compromised.The choice of materials also had to conform to the surrounding properties: the dormer windows were lead-clad, and the roof was tiled in Welsh slate, which softens its appearance and reduces the “apparent bulk of the structure.Another complication for Robinson Leigh related to the impact upon the large villas of Langford Place to the rear of the property. Vehement objections from these residents, who were concerned that the roof extension would shatter the illusion that they are set in extensive grounds led the architects to revise their proposal: the pitch of the northwest slope of the mansard roof was adjusted to a 70 degree angle in order to reduce its prominence in the views from these villas, particularly from 5 Langford Place. A second flat roof, which adjoined the house was removed, and Robinson Leigh extended the mansard roof to the parapet. This then gave the client more internal space, eliminated any overlooking issues, and created a more homogenous and symmetrical design.The architects cleverly designed both the main roof level of the mansard to be landscaped with indigenous flora in order to respect the planners’ preference for ecological biodiversity in the area as well as to attenuate water run-off.In conjunction with these structural requirements imposed on Robinson Leigh’s design of the mansard roof, unlocking natural daylight in the “dark zones” in the interior of the new storey was a key priority. Mindful of the rejection of the glazed roof proposal from 2001, which the planners had deemed to be too intrusive on the neighbours and at odds with the surrounding architecture, the architects sought to reduce the amount glazed by 50%, whilst simultaneously addressing the problem of reduced levels of natural daylight resulting from the recessed dormer windows.Robinson Leigh’s solution was to propose a more sympathetic glazing arrangement to the flat-top of the mansard roof, comprising four large fixed rooflights and a sliding over fixed rooflight from Glazing Vision, that would achieve the high specification they desired. These rooflights, pointed upwards to the sky, would maximise the amount of daylight entering the extension and bouncing off the hardwood timber, which had been used extensively, as Leigh points out, to “draw together several disparate elements of the interior design, such as the sliding walls, pocket doors and floor-to-ceiling shelving and cupboards”.Glazing Vision’s sliding over fixed rooflight was to inhabit the space immediately above the stairwell, which had also been lined in timber to subtly link the top floor with the ground floor and to help draw the eye upwards. Timber frames had also been used on the windows. As with the other four rooflights, Glazing Vision’s sliding over fixed rooflight needed to be made to a bespoke size – the architects required it to be the exact size of the stairwell, or indeed over-sized, so that the frames were not visible from below. Precision-engineered at the Glazing Vision factory in Norfolk, the special sliding over fixed rooflight was supplied in two sections, with an overall span of 2400mm and a width of 2240mm. The minimalist internal framework, finished in pure white rather than the standard grey, ensured that there were unfettered, sky-only views from the inside, thereby enhancing the impression of space and loft. Through the clear glazing of the Glazing Vision rooflight natural daylight absolutely flooded the stairwell, permeating also down to the lower floors.Given the stringent planning controls on the appearance of the mansard roof and the concerns of the vociferous neighbours, Glazing Vision’s sliding over fixed rooflight offered another invaluable benefit to Robinson Leigh. The footprint of the unit on the roof remained fixed, both open and close. This meant that there was no bulky additional furniture required, whilst the minimalist exterior framework was finished in slate grey to blend harmoniously with the Welsh slate roof tiles.No less important was the need for natural ventilation in the mansard roof extension. The architects were keen to create a venturi effect in the central core of the house and stairwell by channeling the airflow through the opening of the rooflight. The Glazing Vision rooflight, specified by Robinson Leigh to slide side-to-side rather than up and down, is electronically controlled at the touch of a button from inside the house, retracting the sliding section over the fixed section of glazing. Once the sliding section is fully retracted, there is a 50% clear opening in the rooflight, out towards the sky, thus providing superior air quality within the top floor, as well as intensifying the amount of natural daylight. An essential security feature of the Glazing Vision sliding-over fixed rooflight is that it is supplied with a manual override as standard.The design, approval and erection of the mansard roof extension took three years but Robinson Leigh have succeeded in updating a tired-looking 1980’s mews house with a new, sophisticated, modern exterior, that quietly complements the surrounding properties. The new third storey has exceeded the client’s needs for additional living space, and the clever use of rooflights has ensured the interior is light, bright and inviting.
Sponsored
Commercial Project – Surrey

Commercial Project – Surrey

Russell Roof Tiles

A stable conversion project needed an authentic clay roof finish.
Sponsored
Kensington Roof Gardens

Kensington Roof Gardens

Axter Ltd

The multi-million pound refurbishment project saw the iconic building and its landscaped gardens restored to their former glory. Axter’s cold applied liquid waterproofing systems delivered a high quality solution to this challenging refurbishment.Systems in useStarcoat® QCStarcoat® PMMAKensington Roof Gardens is one of London’s best known venues, once famous for its flamingos and celebrity guests. The Grade II listed gardens were designed by landscape architect Ralph Hancock and date back to the 1930s. The venue features one of Central London’s most famous intensive living roofs and also includes an indoor restaurant, entertainment space and elevated terracing.ChallengesThe refurbishment of Kensington Roof Gardens was technically demanding. This was due to the complexity of the waterproofing details and space restricted installation locations as well as the specific waterproofing requirements.The refurbishment of the pond and waterways required a liquid waterproofing system that is proven to be safe for aquatic life, is UV stable and meets the aesthetic requirements. In addition, the waterproofing for the elevated terraces and walkways needed to be robust, rapid curing and appropriate for high traffic areas with a high quality, anti-slip finish.SolutionsAxter’s Technical Sales Team was able to provide BBA approved liquid waterproofing specifications for both areas. Axter ensured the highest quality waterproofing installation in all areas.Starcoat QC flame free single component PU resin waterproofing was used for the pond and waterways. The system cures fast in just 4-8 hours depending on the conditions and creates a tough, seamless, elastomeric membrane. This makes it ideal for complex refurbishment projects, such as Kensington Roof Gardens, where effective bridging of cracks and resistance to structural and thermal movement is essential. The robust, solvent free membrane also simplified the waterproofing of the site’s complex details and is resistant to chemicals and root penetration.The Starcoat PMMA (polymethyl methacrylate) two component waterproofing, used on the walkways and terraces, is zero fall accredited, hard wearing and can withstand significant loading and mechanical stresses. Available in a choice of colours, traffic and anti-slip finishes, it also provides an excellent solution for complex detailing and challenging application areas.AcknowledgmentsThe refurbishment of the iconic Kensington Roof Gardens demonstrates the versatility of our Starcoat PU and PMMA liquid waterproofing systems. Working closely with our partners, we were able to provide a high-quality technical solution that benefits from a 25-year system guarantee.Phil Wilcox Moore, Managing Director at Axter
Sponsored
A flat roof in the Austrian Alps - INVATHERM

A flat roof in the Austrian Alps - INVATHERM

FOAMGLAS®

A flat roof in the state of Tyrol was used to rigorously test a new non-combustible inverted roof insulation solution for the UK market.
Sponsored
Metal Roof Coating in Suffolk

Metal Roof Coating in Suffolk

Liquasil Ltd

The original factory finish to the metal roof of this property was failing, with the coating delaminating badly due to UV damage. The gutterless eaves construction meant that both the roofs and cladding had to be coated. Metalseal was specified because it is available in any RAL colour., In this case, Juniper Green was required. The original finish was removed with 4000psi pressure washers , before corrosion was treated with Liquasil's corrosion primer before Metalseal 20 was applied.
Sponsored
Metal Roof Coating Project in Middlesex

Metal Roof Coating Project in Middlesex

Liquasil Ltd

After first cleaning the roof and attending to rusted areas with Liquasil’s corrosion primer, it was the coated with Metalseal 20 from Liquasil, using airless spray equipment. The specification for this roof was for a special RAL colour. Only Liquasil can make silicone coatings in any RAL colour, so Metalseal 20 was specified for the project. This roof was completed in Forest Green.
Sponsored
Social Housing – Derby

Social Housing – Derby

Russell Roof Tiles

Russell Roof Tiles supplied tiles to 3 social housing sites in Derby.
Sponsored
Extra Care, Bedfordshire

Extra Care, Bedfordshire

Russell Roof Tiles

A large retirement village at Parkland Place in Bedfordshire required slate appearance roofs.
Sponsored
Skydoor Roof Access Rooflight Has Helped Open The Roof Space Of Beautiful Holiday Home Located In Michigan

Skydoor Roof Access Rooflight Has Helped Open The Roof Space Of Beautiful Holiday Home Located In Michigan

Glazing Vision Ltd

Skydoor Roof Access Rooflight Has Helped Open The Roof Space Of Beautiful Holiday Home Located In Michigan Case Study
Sponsored
Private Housing – Waterlooville

Private Housing – Waterlooville

Russell Roof Tiles

Russell Roof Tiles supplied Bute tiles in Burnt Orange for a residential housing project in Hampshire.
Sponsored
Woodland Trust Curved Roof

Woodland Trust Curved Roof

Polyroof Products Ltd

As described by the Woodland Trust, Glen Finglas is a great expanse of ancient woodland, lochs and open heathland, sitting at the heart of Loch Lomond and The Trossachs National Park and home to one of the best examples of upland wood pasture in Scotland.The newly constructed Gateway Building was designed to blend in with the surrounding woodlands and featured a circular timber-clad exterior with a spiralling, curved roof. The Woodland Trust approached RTA Building Limited, a Polyroof Approved Contractor, to provide a guaranteed waterproofing solution that would complement the aesthetics of the building.After comprehensive discussions and careful evaluation, we recommended the Polyroof 185 Warm Roof System for this unique project. This system stood out due to its exceptional BBA 30-year durability rating, impressive life-cycle costing performance, and an insurance-backed guarantee that offered the client peace of mind.The implementation process involved the meticulous installation of the Polyroof membrane, which flawlessly covered the flat roof areas while seamlessly following the curved perimeters and intricate spiral design. To ensure a fully waterproof edge detail that complemented the building’s contours, we installed a bespoke GRP capping. This robust combination provided Woodland Trust with a reliable and long-lasting roofing solution.Through our collaboration with Woodland Trust, we successfully implemented the Polyroof 185 Warm Roof System, delivering a durable, and cost-effective roofing solution. Our system’s exceptional durability rating, long-term life-cycle costing performance, and insurance-backed guarantee provided Woodland Trust with the confidence that they had chosen a roofing solution that would stand the test of time. With Polyroof, Woodland Trust achieved a seamless, reliable, and environmentally conscious roofing solution for their unique project.
Sponsored
Roofspace upgrades its i-Roof Specification to ARC's complete firestopping solution

Roofspace upgrades its i-Roof Specification to ARC's complete firestopping solution

ARC Building Solutions Limited

Roofspace Solutions originally specified firestopping materials from various manufacturers for its unique i-Roof system. However, when browsing the market for a supplier that could provide a complete firestopping solution, Roofspace opted for ARC Building Solutions array of products for its quality, certification and reputation within the housebuilding industry.
Sponsored
Aluminium Cladding and Decking Solution for Balcony Refurbishment Project at The Kingsbury Building in Islington, London by Alu-Installations

Aluminium Cladding and Decking Solution for Balcony Refurbishment Project at The Kingsbury Building in Islington, London by Alu-Installations

AliDeck

We visited one of our approved installers to check out the refurbishment process underway at The Kingsbury Building project on Horsell Road in Islington, London. Alu-Installations installed our complete non-combustible balcony solution, using AliClad Flow aluminium soffit cladding and AliDeck Junior Ridged aluminium decking boards.
Sponsored
Biosolar wildflower green roof school project

Biosolar wildflower green roof school project

Wallbarn Ltd

New school construction with biosolar wildflower roof system. Selection of sedum and native wildflower species pre-planted into M-Tray modular green roof trays for fast and easy access to and installation on single ply roof membrane. Client increased thermal insulation, reduced rainwater run-off, achieved energy savings, protected the waterproofing membrane and attracted wildlife to the roof space.The wildflower / PV roof system will feature in students' learning projects in the future.
Sponsored
Roof Garden, Lamb Walk, Bermondsey

Roof Garden, Lamb Walk, Bermondsey

SureSet Resin Systems

The roof project in Bermondsey consisted of an accessible green roof for residents on the first floor and a green and brown roof at the next level. Natural Aggregate, 6mm Barley Beach. London
Sponsored
Private Housing – Stirlingshire

Private Housing – Stirlingshire

Russell Roof Tiles

Russell Roof Tiles supplied 26,000 Slate Grey Pennine tiles as part of a £36,000 contract for a total of 13 private homes in Falkirk.
Sponsored
Asbestos roof coating installation Birmingham

Asbestos roof coating installation Birmingham

Liquasil Ltd

This asbestos roof is being cleaned using a closed box pressure wash, with all waste water being filtered and recovered for re-use. Once cleaned, the roof is coated with the BBA Approved Asbestoseal system which includes: SWT CORROSION PRIMER - fully rust and wet tolerant, the primer is applied to all metal fixing to stop further corrosion. NON-SAG SEALER - is applied to all fixings and small holes and cracks to permanently seal them. ASBESTOSEAL 20 is brush applied to the roof sheets to provide a new finish.
Sponsored
Roof Terrace, Outdoor Raised Floor - Västerås, SE

Roof Terrace, Outdoor Raised Floor - Västerås, SE

Floor Levelling Systems Ltd

SubFloor Outdoor Flooring was used to help renovate and raise a 650 m² roof into an outdoor terrace in Västerås, Sweden.This was built on top of the existing roof felt and used high-quality pressure impregnated wooden joists to create an even surface, level with the rest of the building. The joist and screw system allows for quick and easy assembly so that the floor can reach the desired height.Products:Pre-treated Wooden Joist 45x70x3600 mmSubFloor Screw 300 mmSubFloor Screw FootHeight Variation: 90 - 339 mmJoist separation: c/c 300 mmSystem Weight - c/c 300 mm: 10.72 kg/m²Materials:Pine T0-C24Fibre-reinforced polypropylenePolyamidePoint Load Limit (50 x 50 mm):Load next to screw over joist edge - 21.74 kNLoad between screws over joist edge - 16.43 kN
Sponsored
Private Housing – The Limes

Private Housing – The Limes

Russell Roof Tiles

ussell Roof Tiles is supplied our Natural Range Galloway and also the profiled Pennine tile to a total of 128 new build homes in Leicestershire.
Sponsored
Retractable Glass Roof at The Hawk's Nest

Retractable Glass Roof at The Hawk's Nest

Breezefree Ltd

The largest SolaGlide retractable glass roof in the UK is the talk of the town! Installed by Breezefree at The Hawk's Nest in London’s Shepherd’s Bush.Working with the team at Birdhouse London, we were presented with the challenge of transforming their outdoor space at The Hawk’s Nest into a flexible all-year space, whatever the weather. Challenges included satisfying the requirements of TfL due to the tube line running immediately above, as well as the venue’s request to have a space to trade in during construction work.The result is a chic hospitality space with a sliding roof that offers options for open airiness or full enclosure from the elements. The roof also offers significant soundproofing, reducing impact on neighbours on their most lively nights. The transformation means that the venue can offer their delicious cocktails, and pizzas that have to be tasted to be believed, underneath an elevated and stylish roof that will help draw diners and revellers for years to come.
Sponsored
Shopwyke Lakes, Chichester

Shopwyke Lakes, Chichester

Russell Roof Tiles

Russell Roof Tiles supplied Taylor Wimpey with 180,000 Bute tiles, a thinner leading edge tile, in Burnt Orange for its Shopwykes Lakes development in Chichester.
Sponsored
Chilling under a white roof...

Chilling under a white roof...

RENOLIT Cramlington Ltd

Friesland Campina CHALLENGE An absolute must for refrigerated warehouses or dairy processing facilities is to try to keep the building as cool as possible and to avoid all causes of heat, in order to keep the cooling costs as low as possible. Some decisions can have detrimental effects though. Mechanical fixing of the roofing membrane for example, in case the wrong fastenings are used. Thermal bridging may cause cold – or in this case heat - penetrating through the flat roof fasteners resulting in higher energy bills. And, quite important as well, mechanical fixing will perforate the vapour control layer, which in the case of cool buildings sits uppermost on the insulation. The result being moisture-related damage to the insulation! Furthermore, it has also been proved that the darker the roofing membrane, the less the sunlight will be reflected, the more heat will be absorbed. Again resulting in escalating energy costs. Waterproofing a cool storage warehouse is definitely not easy! In this regard Friesland Campina were looking for a durable and ecological roof solution for their brand new refrigerated distribution centre in Maasdam. SOLUTION RENOLIT came up with the perfect answer: the RENOLIT ALKORBRIGHT cool roof membrane. Here’s why! RENOLIT ALKORBRIGHT is a completely white PVC membrane reflecting the sunlight up to 90%. Absolutely the highest solar reflectance rate ever. Thanks to this membrane, which prevents the interior from warming up, there will be no extra air conditioning expenses. In addition, an extra protective coating makes sure less dirt sticks to the roofing membrane. This layer will in turn help to maintain a durable reflection. 

Showing 253-288 of 899

Feedback