"holders"

Newton Specialist Contractors ASF Waterproofing were called in to investigate why the Bridge Master’s Quarters at No.1 Tower Bridge was suffering from damp and proceeded to install multiple Newton products to resolve the issue.At the world-famous Tower Bridge, landscaping contractor Maylim was commissioned by the City of London Corporation to investigate why the Bridge Master's Quarters at No.1 Tower Bridge was suffering from damp.After excavating, they discovered that the structure had no effective damp proofing protection. Newton Specialist Contractor ASF Waterproofing were commissioned to install new damp proofing measures to solve the issue.ASF Waterproofing approached the project in two phases, using multiple products to effectively damp proof both inside and outside the building. At the start of phase one, ASF correctly prepared and cleaned the internal wall surfaces before installing a new damp-proof course by injecting Newton 804-DPC into the walls at regular intervals, then sealing the holes with Newton 313-WP. The walls were then smoothed with a new internal render, ready for Newton 103-S to be quickly and easily sprayed to provide a final barrier to water.For phase two, the ASF team turned to the external walls of the structure, preparing and cleaning the surface before applying a new external render coat. The wall was then thoroughly waterproofed with four coats of the flexible, resilient Newton 109-LM. To ensure that the building was completely protected externally, the waterproofing began at 1 metre below ground level and extended all the way up to the existing windowsills.Thanks to their meticulous attention to detail and high standard of installation, ASF Waterproofing were able to provide both the contractor and the client with a high-quality and comprehensive damp proofing solution. As a result, the City of London Corporation can now hand over the building to the new lease holder, safe in the knowledge that it is well protected from damp.

Wolverhampton market has recently undergone a major overhaul. The project involved closing all of the indoor stalls and moving them elsewhere; mainly into shipping containers which had been specially designed for the purpose.Project managers White Circle are at the forefront of the shipping container upcycling trend. While markets don’t traditionally tend to require much security at a stall level, relocating to permanent outdoor structures posed a new challenge. This was solved by installing a T55 security shutter on each of the 16 cabins. Openings measured from 1.6m to 2.9m wide, all at 2.3m high and with manual operation. An anthracite grey finish was chosen to complement the brightly coloured containers.T55 security shutters have 55mm slats, enabling a box size between 165mm and 250mm. The compact design makes them perfect for small openings where aesthetics are important.In Wolverhampton, stall owners were happy with their new accommodation. The Snack Bar café was based indoors for 19 years before the move. Co-owner Donna Walton said: “For us it’s been much busier outside. It’s been a big change but it’s for the best, and we love our new home now”.She continued: “At first I was worried whether the business would be more vulnerable being outside, but when the council told us we’d have roller shutters I felt relieved. They’re unobtrusive and really easy to open and close, too”.in addition we provided 9 of the Markilux 3300 patio awnings designed for widths of up to 5600mm and with a projection of 1500mm projection. These were manufactured with manual operation due to the reduced projection and gave stall holders ease of use depending on the conditions.The angular design was well suited to the shipping containers and the grey frame and fabric colour were chosen to keep a uniform look across all the different containers. 

Falco recently took to the design, manufacture, supply and installation of a bespoke cycle hub based on the traditional FalcoLok-500 design. Installed at Anson House, south Westminster, in view of the River Thames, the new cycle hub has been coupled with the FalcoVert-Pro cycle rack to provide secure accommodate for up to 24 bikes.Installed on behalf of Westminster City Council, the new cycle hub features electrogalvanised perforated sheet cladding, powder coated in a Jet Black RAL colour, along with a secure access system.The whole shelter is a bespoke contemporary design of the classic FalcoLok-500 shelter, which features clean lines through the glass cladding and supported by stainless steel glass clamps. The steelwork is hot dip galvanised to BS EN ISO 1461 and also meets UK structural design laws with EN 1090 accreditation. Rainwater is collected via innovative integral gutters as part of the roof system and a bespoke bund ensure that the cycle hub is weather proof!The cycle hub was commisioned to help reduce congestion and provide greater cycling accessibility for residents of Anson House.The FalcoVert-Pro as shown here at Anson House, is a space saving cycle rack design ideal for highly popular densities such as stations, cycle hubs, shopping centres, high streets and car parks etc. Bicycles are parked semi vertically with both front and rear wheels located in a custom designed trough.Falco cycle hubs can also incorporate a world of features including; smart LED lighting, green sedum roofs, CCTV and Help Point facilities as well as numerous other cost-effective features for the cyclist such as lock holders, helmet lockers, seating and bike repair facilities. For more information about the FalcoHub cycle store, a demonstration of the FalcoSmart app-based lock, the FalcoPod bike hangar or any other Falco product, then please speak to one of our friendly customer service staff on (01538) 380080.

The new Design Museum at Kensington, which opened itsdoors to the public in November 2016 following a move fromits previous residence at Shad Thames, has specified Allgood’sModric ironmongery throughout its interior. Winner of the Guildof Architectural Ironmongery Specification Awards 2016/ 2017Commercial category, the imaginative ironmongery solutionsmeet the architects brief; matching the building’s look and feel.One of the £83million refurbishment’s standout architecturalfeatures was the preservation of the original roof structure, whichwas central to how the new project took shape. The internalfloors of the old building were demolished with a series ofpiles, temporary trusses and beams supporting the internal roofcolumns until the new structure was built and the fit-out stagecould begin.The inherent objective of the project was to create a worldclassmuseum in the heart of London, including permanent andtemporary exhibitions as well as learning spaces – showcasingall elements of design, including fashion, product and graphicdesign.Established in 1989, the museum is known for promoting andexhibiting the best in British design as well as displaying bold andiconic international items.A British design classic, Modric is manufactured in Allgood’s UKfactory where craftsmen pay close to attention to detail, handfinishing every product. Modric has a long-standing reputationof quality built on its ability to consistently perform to the higheststandard. Operating on the unique quadaxial fixing, Modric leverhandles have been independently tested to BS EN 1906 andhave surpassed 1 million cycles, providing just one example whyAllgood has the confidence to offer a 25 year warranty on therange.The interior of the Design Museum features an array ofproductsfrom the Modric range including lever handles, hinges,pull handles,push plates, wc turns, and door signage, as wellas overhead doorclosers, magnetic door holders and unique,concealed doorstops.

C-TEC’s revolutionary new evacuation alert system, EVAC-ALERT, has been specified for a new purpose-built residential building in London.Located in the Elephant and Castle area of the London Borough of Southwark, Joyce Newman House is an 8-storey block of 40 spacious living spaces commissioned by Leathermarket JMB, Southwark’s largest resident-managed housing organisation. The affordable-housing development also features landscaped gardens, an interactive playground and a communal kitchen garden for residents to grow their own vegetables.Specified and supplied by Churches Fire & Security working alongside Blu Electrical Installations Ltd, C-TEC’s EVAC-ALERT has been designed to comply with the new BS 8629, which recommends evacuation alert systems be installed in all new blocks of flats over 18 metres to assist the Fire and Rescue Service (FRS) in evacuating part or all of a building in an emergency.The system consists of a 2-loop control panel connected to a host of single and multi-way interface units, self-testing sounders and visual indicators. Simple and intuitive with manual controls to allow firefighters to easily operate the evacuation alert devices located inside flats on a zone by zone or floor by floor basis, the panel is stored in a secure vandal resistant cabinet which can only be accessed by the FRS using a special copy-protected key.David Collins, Project Manager at Churches Fire & Security, said: “Evacuation alert systems ensure firefighters can alert occupants in a building of the need to evacuate if a fire gets out of control. The EVAC-ALERT system we’ve specified provides peace of mind for residents and, crucially, also demonstrates that building management have taken every precaution possible to protect the people residing in the property. Our client is delighted with the system.”Certified to all relevant EN54 product standards, EVAC-ALERT is powered by C-TEC’s CAST protocol and fully compatible with ENVISION, its powerful new cloud-based remote access data management software which can be used to provide duty holders with a verifiable audit trail of system activity and device testing.

This is the new sleek and inconspicuous cycle hub recently designed, manufactured, supplied and installed by Falco at Hackney Central Overground Station.Greeting commuters to the west of the station, the 10m cycle hub has been fitted with a combination of both reinforced safety glass and sustainable hardwood cladding.A series of 48 spaces of the FalcoLevel-Premium+ two-tier cycle rack have been installed along with a FalcoFix 2.0 cycle repair station, LED lighting, CCTV security, branding graphics, a green sedum roof and secure mobile app access. Falco also installed five separate TfL London cycle stands located outside of the cycle hub.The green sedum roof, an increasingly popular feature for Falco shelters, supports the operators sustainable development plan by providing the many advantages associated with green roof systems as well as insulation for both heat and noise. A sedum roof both reduces water discharge as well as compensating for CO2 emissions.The FalcoSmart mobile app access system uses Bluetooth technology to provide Hackney commuters with secure access to the cycle hub using their own smartphone or tablet, removing the need for physical keys and fobs. Commuters are able to apply for access to the hub via Falco and having downloaded the ‘App’ are given access rights to the cycle hub for a period of time depending on their subscription.The images attached show the new cycle hub addition, installed to the west of the station, on Graham Road.Hackney Central is a railway station located on the North London Line within Greater London, serving 4.3m annual passengers.   Falco cycle hubs can also incorporate a world of features including; smart LED lighting, green sedum roofs, CCTV and Help Point facilities as well as numerous other cost-effective features for the cyclist such as lock holders, helmet lockers, seating and bike repair facilities.For more information about the FalcoHub cycle store, a demonstration of the FalcoSmart app-based lock, the FalcoPod bike hangar or any other Falco product, then please speak to one of our friendly customer service staff on 01538 380080.

EVAC-ALERT, C-TEC’s new evacuation alert system, is now in operation at Delaney Heights, a radically renovated tower block in Salford.With 119 affordable rent apartments featuring floor to ceiling windows and stunning city views, the building cost over £9M to refurbish and is named after Shelagh Delaney, Salford’s famous playwright and the author of ‘A Taste of Honey’.The EVAC-ALERT system installed there comprises a powerful 3-loop panel connected to single and multi-way flat interface units, self-testing sounders and Equality Act-compliant visual indicators and vibrating pillow pads, all designed to fully comply with BS 8629, the code of practice for evacuation alert systems.Darren Moulding, Director at Supersafe, the BAFE SP207-registered specialist fire company that completed the project for The Guinness Partnership, said: “Optimum fire safety protection and the correct evacuation procedures are critical in residential buildings to protect people and property.“Currently there’s a huge demand for evacuation alert systems as Part B of Building Regs states they must be installed in all new residential buildings over 18 metres high. “EVAC-ALERT’s flexibility means it’s very easy to customise to create a cost-effective BS 8629-compliant solution for any high-rise to give owners and residents peace of mind.“We particularly liked the fact we could test every single sounder independently from the panel and that the entire system was powered up and running perfectly from the word go. Our client was very impressed during handover and, as a company, we would highly recommend EVAC-ALERT.”Joanne Stokes, Building Safety Resident Liaison Officer at The Guinness Partnership said: “Myself and Robert Murphy, our Clerk of Works were more than happy with the installation of the evacuation alert system. Supersafe’s customer service skills are second-to-none and communication with myself and our customers was first-class and kept the project firmly on track. I look forward to working with the Supersafe team on future projects.”EVAC-ALERT is powered by C-TEC’s CAST protocol and fully compatible with ENVISION, its powerful new cloud-based remote access data management software which can be used to provide duty holders with a verifiable audit trail of system activity and device testing.

THE PROJECTWe start 2018 with a case study that is truly the epitome of ingenuity and design! What a privilege to be involved in Gas Holders.King’s Cross is inextricably linked to London’s industrial past. The telescopic gasholder was invented in 1824 and provided the storage needed to meet the demand of an ever-expanding city.The interlocking gasholder triplets were built and revised between 1860 and 1880 and now, some 150 years later, they are once again responding innovatively to The Capital’s ever increasing population. Architects Wilkinson Eyre have produced a truly stunning and extraordinary development.Luxury apartments designed by Jonathan Tuckey Design have designed internal beauty that benefit from a Regent’s canal waterside location, breath-taking communal roof gardens, and an array of amenities elegantly furnished and dressed by London interior designers No12 Studio. Amenities include spa and gym, residents lounge and a sophisticated entertainment suite including private dining and catering kitchen, a 14 person screening room, with an adjacent elegant games room, for use before or after the show.The Gasholders lobby displays extraordinary attention to detail in its integration of the building’s industrial heritage with contemporary design and style. A 24-hour concierge team operates from a bespoke desk made in natural stone, while polished concrete floors with brass inlay, a sweeping spiral staircase and feature light sculpture introduce guests to the drama of the interior. It also houses the bespoke brass mailboxes painstakingly developed and created by our Innovation team.THE PRODUCTBack in 2014, we were approached by Wilkinson Eyre Architects to create a curved bank of mailboxes with particular emphasis on the hinge and finish, the overall requirement for a suitably stunning yet functional solution.Houston Cox Central were awarded The Triplets contract to design, manufacture and install all specialist joinery, which included the solid brass bespoke mailboxes that formed an integral part of the reception area. The joinery design presented its challenges, working within a cylindrical building with zero design tolerance. All the joinery interfaced (between panels, doorsets, wardrobe and vanity units) with each other to form an integral part of each living space. As on previous projects, we worked closely with Houston Cox Central over many months to ensure the clients brief was met. The bespoke designed mailboxes aligned with full height panels following the curved atrium wall within the ground floor reception area. The unique design of the brass mailbox doors with robust solid continuous brass hinges are very fitting for this iconic building. Houston Cox Central are delighted with the end result, having completed the installation late 2017.