"glass"

This is the latest cycle hub designed, manufactured, supplied and installed at Salford Royal Hospital in Pendleton, Salford. Based on the flagship FalcoLok design, the 3m x 3m glass clad cycle hub is coupled with Sheffield stands to provide secure accommodation for up to eight bikes.Back In 2020, Falco installed a large hub at Salford Royal to accommodate 20 cycles with FalcoLevel-Premium+ two-tier racks. In May 2022, Falco were asked to visit Turnpike House by the same client to look at installing a secure shelter that wasn’t too imposing in height and size. The shelter was for staff to replace an old tired flat roof structure.To keep the same theme at the two sites, Falco used the same mechanical code lock and 11.5mm toughened laminated heat soaked glass in glass clamps, then customized the graphics to match. The steelwork of the cycle hub was powder coated in the same attractive NHS blue RAL colour.The unit accommodates eight cycles using traditional Sheffield stands and was designed to sit on the same footprint of the old shelter that would only accommodate five cycles.The whole shelter is a bespoke contemporary design of the classic Falco Cycle Hub shelter, which features clean lines through the glass cladding and supported by stainless steel glass clamps. The steelwork is hot dip galvanised to BS EN ISO 1461 and also meets UK structural design laws with EN 1090 accreditation. Rainwater is collected via innovative integral gutters as part of the roof system and a bespoke bund ensure that the cycle hub is weather proof!In addition to the cycle hub shown here for Royal Salford, Falco has also recently installed cycle hubs for many locations across the UK including Fairfield General Hospital, Rochdale Infirmary, Stromness Travel Centre in the Orkney Islands, Crewe, Runcorn, Birmingham International, Warrington Bank Quay and Carlisle station for Avanti West Coast, Bradford Royal Infirmary and St Luke’s Hospital for Bradford Teaching Hospitals NHS Foundation, The Royal Oldham Hospital for Pennine Acute Hospitals NHS Trust, Ninewells Hospital & Medical School in Dundee and a bespoke cycle hub for Leicester City Council.For more information about the project here at Salford Royal or how Falco can assist your cycle parking scheme, please contact our helpful sales team on 01538 380080.

A new youth centre's development is underway to the west of Weribee, in the surronding area of Cherry Creek and Dart Valley Systems have provided products from the Safe Ensuite range for the project.The Safe Ensuite range is manufactored from Glass Reinforced Polyester (GRP) which is a single skin configuration that has three different weaves of glass fibre to give the product a good internal sttructural integrity, this is then impregnated with polyester resin to matrix it all together to produce the strong and extrmely durable composite material. GRP is virtually unbreakbale and ideal for high security and correctional facilities. The range of products provided are as follows:·       178 x VR01-010 High Security Ligature Resistant Toilet·       37 x VR01-072 V2 High Security WC Pan Less Abled with Grey Top

A new youth centre’s development is underway to the west of Werribee, in the surrounding area of Cherry Creek and Dart Valley Systems have provided products from the Safe Ensuite range for the project. The Safe Ensuite range is manufactured from Glass Reinforced Polyester (GRP) which is a single skin configuration that has three different weaves of glass fibre to give the product a good internal structural integrity, this is then impregnated with polyester resin to matrix it all together to produce the strong and extremely durable composite material. GRP is virtually unbreakable and ideal for high security and correctional facilities. The range of products provided are as follows:178 x VR01-010 High Security Ligature Resistant Toilet 37 x VR01-072 V2 High Security WC Pan Less Abled with Grey Top

Orbis OS211 Glass Infill Top FixOrbis OS221 Midrail Infill Top FixOrbis OS201 Vertical Bar Infill Top FixOrbis OS251 No Infill Top FixThe £4million campus modifications at Accrington & Rossendale College create a transformational green space to enhance the campus environment. Wildflower meadows are the backdrop to improved access, ensuring ease of movement around campus.A modern and refined aesthetic has been created at the new main entrance with the installation of Orbis balustrades with toughened laminated glass infill. Whilst powder coated Orbis with vertical bars guides the way from the street level access elevator to the main entrance.Incorporating Orbis with midrail infill to provide extra support for the high traffic main entrance steps, ensuring safety is paramount on campus.

We were happy to work with KKS and ISG on the design and creation of these new spaces. A range of glass partitions for agile working achieved a stunning interior, fit for purpose. Also the design created a BREEAM excellent rating proving it’s sustainability credentials.

At Coverys new headquarters, a stunning array of design elements make this fit-out an undeniable success. Employees work in peace and quiet whenever needed due to the acoustic laminated glass in the Revolution 54 Plus partitions and Edge Affinity doors.

StoVentec Glass rainscreen cladding was specified for a new two-storey science block which has been built at Wolverhampton Girl’s High School, following its successful use on the school’s new sixth-form building, completed in 2018.

Aluminium glazing channels in a natural anodised finish are used for the glass partitioning in a basement leisure space conversion.These versatile profiles include shuffle-less glazing channels and door pivot kits, offering seamless transitions from partitioning to doors.

Solid wood floor specialist Junckers worked closely with world-renowned architects BIG (Bjarne Ingles Group), to create a custom finished oak floor for the M/S Maritime Museum in Helsingør, Denmark. The textured floor acts a link within the interior scheme of the award winning building, bringing together elements of concrete, glass and steel, housed in an amazing 150 metre long, old concrete dock. The architects’ brief was for a solid hardwood floor that can withstand the heavy footfall of a national museum, with a rustic quality to soften the raw and patinated concrete and large glass panels featured throughout the building. Junckers created a textured finish solid oak floor, which gives contrasting warmth to the overall impression of the museum. By using a specially developed hard brushing technique, the outer sapwood layer of the timber is removed, leaving a tactile, textured surface to expose the beautiful grain patterns naturally inherent in oak. The floor is finished in Junckers Ultra Matt Lacquer resulting in a matt, very hard-wearing floor. The lively two-strip oak floors really come into their own in the large, open spaces of the museums galleries. When natural light from the floor to ceiling glass wall hits the surface of the floor at an angle, it creates a spectacular effect. Following the immense success of the project, Junckers has added the incredible textured finish to many of its floors, both two-strip and wide board planks.

The ChallengeLocated in the city of Nancy, the Centre Prouvé offers a flexible conference space complete with a 3000 m² exhibition hall, two auditoriums, thirteen meeting rooms and a panoramic reception area.With glass playing an integral role in the building design, the architect required a proven smoke control solution that would not distort the aesthetics of the development while adhering to safety regulations. Additionally, due to the high footfall of visitors, the chosen solution would have to be maintenance-free.As a leading fire-glass specialist, Pyroguard was approached by the architect Marc Barani of Atelier Barani to offer a suitable solution.The SolutionTo meet these requirements Pyroguard recommended Smokeguard – a permanent, maintenance-free glazing solution that acts as a smoke barrier, keeping low-level toxic fumes at bay for up to half an hour to give visitors maximum time to exit the building safely.Thanks to its perfect transparency, Smokeguard also met the aesthetic requirements with the 8 mm thick tempered monolithic glass offering 87 percent light transmission, to provide the perfect transparent protective barrier with minimal visual impact.As a result, over 100 m² of Smokeguard was installed in the atrium, escalators, and lift areas utilising its patented fastening system to mount the system to the ceiling areas.Click here for further information on Smokeguard or for further advice and support please contact us.

The ChallengeThis purpose-built, cutting-edge medical research facility forms part of the Karolinska Institutet and is now one of Europe’s largest laboratories.Home to over 1,600 scientists and support staff and with such a high footfall, the safety of individuals took centre stage in the design and construction of the facility.Additionally, ensuring a design aided world-class medical research was of utmost importance. This meant creating inviting, collaborative meeting spaces which were flooded with natural light, as well as rooms that could achieve the correct acoustic and impact performance requirements to contribute to the accuracy of the laboratory’s critical research.To achieve all of these requirements, specifying the correct materials was crucial to achieving the architectural vision of the building, centered around a spectacular glass atrium that connects the outside with the inside. Pyroguard was approached to deliver a solution that would ensure compliance with safety regulations.The SolutionWith glass playing a crucial part in the building’s design, it provided a practical way of delivering adequate fire protection, making Pyroguard Firesafe ideal for the project.With EW-classification, the solution protects against flames, smoke and radiant heat for between 30 and 120 minutes, while also providing additional radiant heat control to deliver greater fire protection.The structural integrity of the product further ensures it can be handled and installed in the most challenging applications, including Biomedicum’s beautiful glass atrium.

The ChallengeWith the architects hoping to realise their vision of space and light on the ground floor, but the fire officer demanding fire safety partitioning around the base of the lift shafts, Pyroguard tendered a stylish, high-performance solution – a lobby encased in glass and steel, capable of delivering best-in-class performance credentials and aesthetic appeal in abundance.Working closely with steel frame and glazing specialist Pacific Fire Control, Pyroguard designed a modern glass wall, with a glazed door and stylish, thin steel frames which were independently fire tested by Efectis France.The scheme amendment was accepted by both the architects and the fire officers, declaring Pyroguard as their manufacturer of choice for this flagship leisure development.The SolutionA subsidiary of India’s largest business conglomerate, the Tata Group, the Indian Hotels Company is known for its relentlessly high standards, which are visible across its portfolio of hotels.Meeting this quality benchmark head-on, Pyroguard supplied 390 square metres of ultra-thin lightweight Pyroguard Firesafe, which offers protection from flames, smoke and radiant heat for between 30 and 120 minutes.This EW-classified product is UV stable and offers exceptional light transmission, making it the perfect solution for encasing the lift lobby. The toughened glass was installed in fire-resistant steel screens and door frames around the lobby.

Products:OS211 Orbis Glass Infill Top Fix Stainless Steel BalustradeOS251 Orbis Standalone (No Infill) Powder Coated Double Handrail BalustradeContractor: Read ConstructionArchitects: AHR ArchitectsIt was great to work with Read Construction on this new two storey extension to St John Plessington Catholic College. With a total project value of £1.3m, the vision was to create a new state of the art Sixth Form Centre with significant internal renovations prior to the extension to enhance existing spaces.Deltas role in the project consisted of supplying and fitting:68m of our Orbis OS211 Glass infill Balustrade System with Stainless Steel Handrail to the internal atrium and stairs.37m of powder-coated Orbis OS211 Top Fix Glass infill Balustrade Systems to the external retaining wall.27.5m of powder-coated Orbis OS251 no infill balustrade with a double handrails to the external steps and ramps.Aside from balustrading requirements, this education sector project introduced an open plan learning centre, media room, eight new classrooms, and new break out space with a canopy for students. The outcome has exceeded expectations and created an adult-focused learning environment for sixth form students, similar to a university setting, as well as providing more space for the increasing pupil numbers at St John Plessington Sixth Form College.Image credits: Read Construction Holdings Ltd

ASF were approached with a very much open book brief to offer a solution for a church square in Mytholmroyd, West Yorkshire. The area needed a wall top parapet, some glass balustrade, seating and tree grilles.ASF specified a wall top quayside post and rail, but using materials that offered the minimum interference with the view for people using the square whilst still meeting the needs of building regulations and parapet requirements. Uprights were from thinner, laser profiled materials with no T piece to make them as unobtrusive as possible and the rails were intermediately staggered with tension cables for the same reasons. Once installed the whole post and rail system was fully welded together on site to increase rigidity and strength. The job was then fully polished to offer a sublime finish quality.A small area of glass balustrade was installed at one end of the square where ground levels dropped away. A seat was paced in this area to allow people to sit and observe the river and wildlife through the glass.ASF 6012 seats were used all around the site offering seating for up to 36 people at one time.ASF 100% recycled cast iron tree grilles were also installed, and finished in a simple clear lacquer which maintains the gunmetal look of a new casting with just slight areas of oxidisation that are used as a feature of the finish.

At the new head office of award-winning manufacturer, Sandon Global, Style worked with contractor, H Cumberbirch, and architects, 2M2 Studio, to create flexible space by installing two Dorma Hüppe Variflex moveable walls with 46dB acoustic ratings. With both walls benefiting from semi-automatic operation, the acoustic seals are always applied to exactly the right pressure, delivering exceptional privacy during meetings and events. Creating a contemporary yet highly functional feature of the walls, a combination of acoustic absorbing fabric and writeable glass was used as finishes.Style is the exclusive UK partner to Dorma Hüppe offering a complete range of solid and glass moveable walls with manual, semi-automatic and fully automatic operation.“This is a really stylish head office for Sandon Global, and the Variflex moveable walls not only offer adaptable room space, but they also complement the interior design perfectly,” said Andy Gibson, Style’s director for the North.“The 46dB acoustics on both operable walls ensure that meetings, training sessions, workshops and other events can take place undisturbed. By incorporating a pass door between the board room and seminar area, the wall can be left in place without access issues, only opening up the whole area for occasional large-scale events. In contrast, the meeting room wall is likely to be used most days, depending on numbers.”Between the boardroom and the amphitheatre-style seminar room, writable white glass was applied on the seminar side, with a Creation Bauman Astra Fabric acoustic absorption surface in the boardroom.The moveable wall between the meeting rooms has a mix of the same acoustic absorbing fabric and writeable white glass on both sides – perfect for hosting brainstorm sessions and workshops.Sandon Global manufactures anilox rolls and cylinders used in the flexographic, lithographic and metal decoration print industries, worldwide. The new, purpose-built headquarters in Runcorn, Cheshire, provides additional capacity as well as a state-of-the art research and development function.

This straight feature stair and glass bridge is located in a spacious office in the heart of London. The mild steel structure accentuated the urban feel of this commercial space. The laser cut risers came complete with brass nosing inserts for a contemporary appearance and completed with a wax finish.

This is the latest cycle hub designed, manufactured, supplied and installed at the new Salford Royal Greater Manchester Major Trauma Hospital, located at the heart of the Salford Royal Pendleton site.Based on the flagship FalcoLok design, the 5m x 4m glass clad cycle hub is coupled with the FalcoLevel-Eco two-tier cycle parking system, providing secure parking for up to twenty bikes.Back In 2020, Falco installed a large hub at Salford Royal to accommodate 20 cycles with FalcoLevel-Premium+ two-tier racks. In May 2022, Falco were asked to visit Turnpike House by the same client to look at installing a secure shelter that wasn’t too imposing in height and size. The shelter was for staff to replace an old tired flat roof structure. In September last year, the hospital required a further 3m x 3m cycle hub to cope with increasing demand for secure cycle parking. The cycle hub shown here is the fourth to be commissioned by the hospital and to keep the same theme as the previous three sites, Falco used the same mechanical code lock and 11.5mm toughened laminated heat soaked glass in glass clamps, then customized the graphics to match, providing a coherent series of cycle parking across the Salford Royal site. The steelwork of the cycle hub was powder coated in the same attractive NHS blue RAL colour.The whole shelter is a bespoke contemporary design of the classic FalcoHub shelter, which features clean lines through the glass cladding and supported by stainless steel glass clamps. The steelwork is hot dip galvanised to BS EN ISO 1461 and also meets UK structural design laws with EN 1090 accreditation. Rainwater is collected via innovative integral gutters as part of the roof system and a bespoke bund ensure that the cycle hub is weather proof!In addition to the cycle hub shown here for Royal Salford, Falco has also recently installed cycle hubs for many locations across the UK including Fairfield General Hospital, Rochdale Infirmary, Stromness Travel Centre in the Orkney Islands, Crewe, Runcorn, Birmingham International, Warrington Bank Quay and Carlisle station for Avanti West Coast, Bradford Royal Infirmary and St Luke’s Hospital for Bradford Teaching Hospitals NHS Foundation, The Royal Oldham Hospital for Pennine Acute Hospitals NHS Trust, Ninewells Hospital & Medical School in Dundee and a bespoke cycle hub for Leicester City Council.For more information about the project here at Salford Royal or how Falco can assist your cycle parking scheme, please contact our helpful sales team on 01538 380080.

Glazing Vision’s three-wall box rooflight has provided a rooftop with more de rigueur, and one which takes advantage of the spectacular views overlooking the Perth shorelines.Keen to unlock and utilise the space on top of this newly built residential home, and further add value to this property, an innovative “glass box” was introduced to provide easy access to the roof terrace.Luxurious, modern and upbeat, this new build property has been carefully created with family life in mind. The floor plan involves family separation and considered zoning of the property.The ground floor provides a secluded escape from the excitement of the first floor, with a detailed layout which enables the clients to relax. A big theatre room and access to the garden offers a chilled out environment, hidden away from neighbours.The first floor is created for living in, with a completely open planned lounge, diner and kitchen. Set higher up, it allows for views across the beach and over the garden courtyard. Thus, it was important to ensure that high quality glazing was specified throughout to make the most of the wonderful views.Tasked with sourcing and installing the windows and doors on this modern new build property, Next Generation Glass director Steve Payne mentions how the client had come to them enquiring about skylights. After a lot of research into the different profiles available in Australia and after various different drawings and ideas, the outcome wasn’t looking good.It was a visit to the UK which led Steve to Glazing Vision, thankful of a recommendation from a contact of his. “Since my first contact, we decided it was a great product and became a distributor of Glazing Vision products in Australia”.After discussing the details of the job, a three wall box rooflight was recommended, helping to provide access to the clients roof terrace and providing wonderful views of the majestic presence of the Indian Ocean in the background.“It really is a great product and all that see it are in awe of it” explains Steve Payne, director of Next Generation Glass.The Glazing Vision three-wall box rooflight is fixed to your existing building structure, thereby facilitating the full use of the roof top terrace but operates in the same way as our freestanding box rooflight. The sleek aluminium framework and perfectly edged glass-to-glass joints create a stunning contemporary finished design which reflects the style of this property.This home’s rooftop terrace is the culmination of meticulous tweaking of the planning codes, and the reward is breath-taking views of Perth, with a beautiful backdrop of the ocean behind. It was in fact these planning codes which guided them towards the three-wall box rooflight, as the extra head height was required when coming up the stairs. Also allowing the homeowner to climb the stairwell whilst the rooflight is retracting into its open position, without having to ‘bow their head’.Fitted with minimal and contemporary outdoor furniture to increase the sense of openness. The new roof top allows the homeowner an additional ‘room with a view’, perfect for entertaining or for relaxing and enjoying the stunning views on offer.Having completed their first project with Glazing Vision, Steve Payne mentions how easy the whole process was, and that most of the hard work was undertaken by Glazing Vision. It was a simple installation process for a company like Next Generation Glass who are used to cranes in their scope of works.

IKO Polymeric, SIG Design & Technology, and Excel Roofing Services have collaborated to design, supply and install 250m2 of single ply roofing for the new kiosk, glass covered beach walkways and stores which houses the latest Oceanarium residents, ten Humboldt Penguins.

Project: Slimming World headquartersClient: Slimming WorldMain contractor: Morgan Sindall ConstructionArchitect: CPMGWith its newly extended headquarters in Alfreton, Derbyshire, weight-loss organisation Slimming World wanted to create a landmark building for the brand that would both provide an ideal working and training space for its people and deliver excellent environmental performance.Glazing plays a key role in the £8.5 million scheme, both aesthetically and in terms of its use of energy.At the heart of the building is a large atrium with a full-height glass front elevation and a glazed roof running right to the back of the space. Meanwhile, one of the wings connected by the lobby area features large ‘picture windows’ that deliver views over the facility’s attractive, leafy grounds.High-performance envelopeBecause much of the building’s envelope is glazed, the designers faced the challenge of avoiding the need for an energy-intensive climate-control system to create a comfortable environment for users all-year-round.Lee Shaw, Business Development Manager at Pilkington United Kingdom, explained: “The twin challenges any building with extensive glazing faces are loss of heat on cold days and excessive heating as result of direct sunlight when the weather is warmer.“The combination of products we have supplied to this project use advanced coatings cleverly to minimise these two effects, helping to smooth out the peaks and troughs that can lead to uncomfortable temperatures, expensive heating and air-conditioning bills and wasted energy.”The curtain walling system uses double-glazed units manufactured by Pilkington, incorporating Pilkington Suncool™ 60/31 T solar-control glass and Pilkington Optitherm™ S1 Plus, a low-emissivity product.The solar-control glass features a state-of-the-art coating that transmits only 31 per cent of the sun’s energy, while still allowing for 60 per cent light transmittance, so that occupants still get a clear view outward.The low-emissivity glass meanwhile features a coating that reduces outward radiation of heat, so that less is allowed to leave the building on colder days.Uninterrupted viewsThe same glass is used in the atrium wall and roof but is held in place using the latest structurally glazed units from Schueco. These deliver glazed surfaces with ultra-low-profile frames to minimise interruption of views from the building, as well as daylight flowing into it.Extra strength is added to the atrium glazing by including a layer of laminated glass on the inner pane, to help the large units stand up to forces exerted on them by the wind and potentially the weight of snow during the winter.Lee Shaw continued: “This project demonstrates the range of glazing solutions we are able to offer, with a combination of curtain walling, structural glazing and roof glass, all of which has been manufactured in the UK.“The architect has used timber slats to deliver some degree of solar shading, but the extensive area of glazing enclosing the space means there would still be significant risk of excessive heat build-up. The glazing specified minimises this effect, saving energy and money while also delivering a more comfortable and stable year-round climate for those using the building.“This is also one of the first projects to feature Pilkington Suncool™ 60/31 Pro T glass, which is now fully manufactured in the UK, following recent re-location of production from Germany. It’s great that we’ve been able to combine a made-in-Britain success story with a new chapter for a well-loved British business.”The completion of the building is the latest chapter in the story of Slimming World, which started when founder Margaret Miles-Bramwell OBE, then 21 years old, first began holding Slimming World groups in Alfreton in 1969. Now, 50 years later, there are 19,000 local groups across the UK and Ireland, run by a network of more than 5,500 self-employed Consultants.The new headquarters includes extensive training facilities, meeting and office spaces, as well as a brand new 550-seater restaurant for staff, guests and Consultants visiting for training.Paul James, Slimming World’s Facilities Manager, says: “People have always been at the heart of Slimming World’s success and so ensuring that our people – our head office staff and Consultants – have the facilities and environment they need to do the best job possible has been a real priority for us. The new building will ensure we have the facilities we need to train and support all of our fantastic Consultants who deliver exceptional service to our members to support them to lose weight and live healthier, happier lives.“Having large expanses of glass has provided us with a beautiful, light-filled space that will be comfortable and inviting for everyone who uses the building right through the year.”

Kings Cross Railway has been one of the largest and most exciting London redevelopments in recent years. In Victorian times Kings Cross was a thriving industrial area but by the end of last century, mostly had fallen into disrepair and dis-used buildings, sidings, warehouses and contaminated land. The move of the Channel Tunnel rail link from Waterloo to St Pancras in 1996 meant the need for change at the 67 acre site. The glass roof consists of two adjacent Victorian steel ‘barrel-vaults’ which now feature our PlasGard patent glazing system. A special glazing bar for use at the ridge was designed with a low external capping so as not to cast shadow onto the photo-voltaic cells to ensure optimal performance. Elsewhere laminated clear glass was used for safety in accordance with overhead glazing guidelines.

Australia House’s design is striking. Its facade combines classical and Art Deco elements, making it a unique addition to London’s architectural landscape.With a thickness of just one millimetre the translucent stone element that gives the ceiling lamps at the Australian embassy in London their mesmerizing look is highly innovative material - Fini Curve Safe with Stone Laminate - glass-stone composite bent into the desired shape.For more information on the project please feel free to contact:FINIGLAS Veredelungs GmbHWierlings Hook 548249 DülmenTel.-Nr. +49-2594-78905-137Fax-Nr. +49-2594-78905-130Andre Seifert / Sales curved glassCell: +49-172-4560654Email: aseifert@finiglas.deHilal Aksit / Sales & MarketingTel: +49-2594-78905-128Email: haksit@finiglas.deWeb: www.finiglas.de

Having outgrown their previous offices, Smoove – a company operating in the property sector (formerly ULS) – took the decision to take on three floors at Masters Court; a fully refurbished office building in the quaint town of Thame, Oxfordshire. They swiftly appointed HNB and Leap Architects to deliver an overhaul of the dated interior that would better suit the Smoove team.We were approached to deliver a glass moving wall capable of separating the ground floor kitchen and main open plan space when required. Our Type G200 system was chosen, which provides transfer of natural light when partition is closed while simultaneously stopping the transfer of noise.The minimalist manifestations applied to the glazed panels along with their black painted frames have been designed to match a number of fixed glass partitions within the space, offering a consistent design throughout.

Canal were approached to manufacture and install an exclusive feature staircase for a private residence in Derby. The Cantilever staircase structure was manufactured in mild steel and features American Black Walnut box treads with a laminated glass balustrade.The upper floor featured structural glass balustrading with a stainless-steel slotted handrail that connected to the staircase structure. The handrail was fully welded, satin polished and featured a floating balustrade. The treads underneath the staircase featured strip lights to create ambience and blended perfectly with the contemporary and minimalistic features of the property. The client commented that the finished structure ‘looked superb and was pleased with the overall result’At Canal Architectural we take on board all specification requirements to ensure that the finished staircase design is functional, practical and aesthetically pleasing. The Canal site team worked closely with the contractor to ensure smooth fitting in line with current UK building regulations.

Our ThermGard Roof Light System provided the necessary profiles to achieve the considerable spans involved, some beyond 4.5m. Solar control glass was utilised to reduce heat gain and this combined with a low-emissivity coating provides year round comfort within the building environment.

Working alongside our partner GPBMU we were able to offer our GPI model building maintenance unit which provides 2 person access to the complete façade. This model also incorporates an auxiliary hoist function with a load capacity of 500kg for the glass replacement.

Armourcoat Sculptural creates seamless wall surfaces with impactful designs and cast relief. Each design is created from cast GRG (Glass-fibre Reinforced Gypsum) panels, CAD generated to enable a continuous pattern or unique decorative effect.Specified by Pernille Stafford of Resonate Interiors

Helo completed the installation of a new sauna and steam room at the Novotel Excel as part of an ongoing improvement program to their wet leisure facilities. The rooms are contemporary styled, utilising subtle underbench and underseat lighting in both rooms. Wide glass doors allow easy, inclusive access for all.

As one of the pioneers of remote working solutions, Citrix recently chose to reconfigure their offices, taking on an additional space at the Cambridge Science Park. Aiming to create an environment that would facilitate engagement, creativity and productivity, moveable wall specialists, Style worked closely with architect, Gensler, and contractor, Area Sq, to offer intensely flexible workspace.Delivering exceptional acoustic ratings of 55dB and 52dB respectively, Style installed two Dorma Hüppe Variflex solid moveable walls and a single Variflex glass moveable wall, allowing Citrix staff to section off a meeting area from the main hall and then further sub-divide the space as required. Contributing to the vibrant new décor, all walls feature black RAL 9005 profiles and dry wipe magnetic boards to encourage brainstorming. Cambridge Science Park has been home to the UK Citrix Research and Development team for over a decade. Having occupied approx. 30,000 sq ft of space on the first floor, Citrix was keen to refurbish their existing workplace as well as expand operations by taking over additional space on the ground floor.Reflecting the Citrix vision and culture, the new layout and design maximises the potential of the space, allowing staff to establish new ways of collaborating.When all three walls are in place, three smaller meeting rooms are created. Alternatively, a combination of one large and one small meeting room can be formed, or just one very large space using just the glass moveable wall. The entire space can also be opened-up into one large open plan area. “This is an excellent example of how a combination of glass and solid moveable walls can create really adaptable office space,” said Steve Williams, sales director for Style Midlands.“Thanks to the inclusion of three pass doors, access is simplified and also allows the glass wall to be left in place for extended periods if desired, creating a more permanent space. “However, due to the semi-automatic operation of these operable walls, they can be opened up extremely quickly so that the entire space can be reconfigured for different vents throughout the day.” 

Specification / scenario -Traditional Church building requiring discrete but effective access control and partition without spoiling the ambiance of the Church interior. A glass partition was needed to limit access at certain times of the day whilst not blocking out light. Maintaining the light intensity was a key factor in design brief.

The first platform lifts is placed adjacent to the pool deck, linking the underground levels to the outdoors. A customised glass and steel structure protects the lift from weather exposure, whilst maximising on the stunning sea views. The A5000 was a great choice to provide accessibility, luxury and ease of installation at this seaside residence.

The ChallengeNo. 1 Horgan’s Quay is one of the development’s three office buildings, with the upper floors of the new modern structure cantilevered over the site’s original Goods Shed. The lobby area features a large glazed partition on the first floor, helping to create an open, light space, as well as sympathetically blending the old restored structure with the new.KCC Group, a door and glazing contractor, were appointed to deliver the EI30 SWS Screen works on the project. Site Contracts Manager, Ger McNamee, said: “In order to ensure the safety of those within the building, 30-minute fire protection was required for the reception area, providing a fire barrier between the lobby and the first floor. Once we had the fire safety glass specification from the architect, O’Mahony Pike Architects, it was up to our team at KCC Group to source a supplier – this is when our relationship with Pyroguard began.”The SolutionTo ensure that the desired aesthetic was achieved, while also meeting building safety regulations, Pyroguard Infinity T-EI30/24-2 SWS fire safety glass was chosen by KCC Group and installed in the glazed partition, within a Jansen steel profile system.Pyroguard Infinity is a range of fire safety glass certified for butt-joint applications. With no vertical frame profiles required, it’s the ideal solution for providing visually appealing seamless partitions. Manufactured to EI classification, Pyroguard Infinity provides the highest level of integrity and heat insulation, protecting against flames, smoke and heat.

Colchester’s Visual Arts Centre is a stunning, crescent-shaped building that treads lightly and shouts loudly. The elegant roof and façade are 100% waterproof thanks to FOAMGLAS® cellular glass insulation. The insulation is covered in Tecu gold sheets seamed and fixed into position, giving this architectural marvel a golden glow.

Cyclepods designed this specific project for two sets of Island Spacepods, complete with a specially designed, elongated glass canopy for shelter, at Doncaster Civic Centre. The client wanted a form of bike storage that would stand out and make a statement in a bid to encourage cyclists to the Civic Centre and accommodate existing cyclists.

JP Morgan is one of the largest investment firms that reside at Canary Wharf. They had a requirement for premium commercial shower cubicles for their staff. Glass and chrome was to a play a key features into the shower design, and we created a bespoke cubicle system to meet their requirements. Read the full case study on our website.

The modern hotel is just one of several new developments being constructed, as the existing town centre is being physically moved and relocated a few miles away.Working with Glasfasader Norr AB, we supplied our Pyroguard Protect toughened fire safety glass throughout the hotel’s internal atrium.