"fire protection"

Improving accessibility has always been a recurring theme in the specification of Neaco’s products and so it proved again when the company’s balustrade systems were called into service for entrance ramps at Humberside Fire and Rescue Service’s new cutting-edge Hull Central Fire Station. Jefferson Sheard Architects sought to design an accessible and welcoming facility to serve the local community. Neaco’s contribution was integral to this objective with aluminium handrails and balustrade to steps and two extensive ramps at the main entrance. The system was also specified with glass infill panels for a first-floor terrace.

Pyroguard’s range of toughened fire safety glass was specified throughout Campus Lelystad in The Netherlands – a beautiful school campus, consisting of six interconnected buildings in a striking circular formation.

Fire-rated smart parcel lockers (MySmartBox) and mailboxes (FR120MBH) in Bronze finish installed in a high end lobby in Oxford Street (London).

A complete wall protection system from Gradus has been installed at the newly refurbished Lysholm Department of Neuroradiology at the National Hospital for Neurology and Neurosurgery (NHNN). Supplied and fitted by the Gradus Contracts Team, the system includes wall guards, corner guards, kickplates and bollards from the stainless steel range, plus handrails from the 450 timber range, which is designed to meet guidelines in Approved Document M, BS8300:2009+A1:2010 and HBN00-04.

Project:Surespan were approached to develop and supply a series of 4 hour fire rated flush floor access covers for the Midfield Concourse expansion project at Hong Kong International Airport. The HK$10 Billion dollar project was completed in 2015 following extensive design and planning processes utilising BIM modelling. Product:Our SAC covers were specified for their fire rating and ease of customisation. The covers were specially adapted with a 200mm upstand and enhanced fire-rated materials to achieve the 4-hour rating. Sizes Supplied 1050 (41”) x 1050 (41”) 1050 (41”) x 850 (33”) 750 (29”) x 600 (23”)

Walraven's Pacifyre MKII fire sleeve was specified throughout the risers in The Shard due to its ability to allow pipe movement and still remain effective.

The Ochiltree Community Hub is in the heart of the Cumnock community in Ayrshire, Scotland. EGGER were delighted to donate EGGER Protect structural flooring boards and Joint & Joist Adhesive to this community project. Located less than 2 miles from EGGER’s Barony plant in Auchinleck, the contribution to the redevelopment by the company helps to benefit the residents of the local area. The aim of the community centre development has sought to support the local community and surrounding areas with a number of initiatives in line with their charitable aims.

Sto has supplied the StoTherm Mineral K external wall insulation system with StoLotusan render for the new Day Case and Eye Unit building at Chorley and South Ribble Hospital. Specified by Gilling Dod architects of Chorley, who worked closely with the main contractor Tilbury Douglas, the StoTherm Mineral K system combines impressive insulation with excellent fire protection characteristics. With an A2-s1, d0 reaction to fire classification in accordance with BS EN 13501-1, the non-combustible mineral fibre insulation is fully bonded to the substrate and therefore no additional firebreaks are required. Ideal for both new-build and refurbishment projects, its efficient single-leaf construction also means that interior space within the building is not reduced.  For this project, the system’s mineral fibre insulation boards were secured to the lightweight steel frame and sheathing board substrate with mechanical fixings and StoLevell Uni adhesive and levelling mortar. A StoLevell Duo Plus reinforcing coat embedded with Sto-Glass Fibre Mesh was then applied to the face of the insulation boards, with StoLotusan and StoSilco renders used for the final finish on different sections of the building, using light colours from Sto’s architectural colour range.  StoLotusan is the only render available that uses Sto’s patented Lotus-Effect® technology which delivers impressive water and dirt repellence. It forms a unique surface texture, similar to that of the lotus leaf, that causes the rainwater to run off the render quickly and easily, removing any dirt or dust as it goes. Providing outstanding resistance to the growth of algae and fungus, the building will retain its looks for many years to come.  The new Day Case and Eye Unit is the result of a major £17.5 million investment in developing enhanced ophthalmology and day case services. The new Day Case and Eye Unit now offers an extensive range of diagnostic and treatment facilities for patients with medical eye conditions.

Location: CroydonMain Contractor: Tide ConstructionThe College Road project in Croydon, south London, comprises two towers. The tallest of these stands 50 storeys high, housing 817 co-living homes, and will be the tallest modular building in the world.The CORTEX 0500FR Class B Membrane and 0771FR Class B Paste Adhesive were both required for their compliance with the correct EN standard for performance and for their Class B fire-classification.Co-Living Homes: 817Affordable Residential Units: 120Two Towers: 50 & 35 StoreysHeight: 158m (World's Tallest Modular Building)

The ideal fire curtain when radiation tenability is of concern.

The Riverside development in Rochdale includes two nine storey apartment blocks comprising a mix of 240 one- and two-bedroom properties for private rent. The Rochdale town centre Riverside regeneration project also includes a 147-bedroom hotel and 43,000 square feet of office space. The Fire regulations which apply to high-rise living accommodation meant that the kitchens in the apartments would require a fire suppression unit complete with sprinklers to be fitted. These units need to be installed and maintained by a specialist engineer and can also cause damage within a property should they be activated due to a fire.  Therefore, the Firechief Kitchen Stove Guard was chosen as an alternative, unobtrusive design-led fire prevention solution. 

Yeoman Shield have recently supplied and installed wall and door protection in the new Urgent Care Unit at Halton Hospital Runcorn.The unit will be busy catering for people in the Runcorn area and is hailed as a one stop shop offering an alternative to A&E for a range of minor injuries and urgent medical care.“The new Urgent Care Unit has been adapted from the old Minor Injuries Unit which has under gone alteration and redecoration with new and refurbished doors fitted. We were keen to protect the new finishes from the damage which can be caused by the everyday use of a busy hospital department.” Said Lee Bushell, Building Surveyor at Warrington & Halton NHS Trust.Yeoman Shield products were installed by their directly employed fixing team to the corridors and cubicle areas in the unit.Guardian Handrail was fitted to protect the walls along the corridors and waiting areas in Aqua Blue with an attractive contrasting insert strip in Mid Grey. An Ultra 60 Protection Rail, also in Aqua Blue, was included at low level to protect the skirting and wall from damage which can be caused at this height from wheelchairs and trolleys.Some of the doors in the unit required replacement and Yeoman Shield fire rated door protection panels and door edge protectors were fitted to all doors to protect from costly damage reoccurring. The addition of Yeoman Shield door protection helped to add uniformity of colour and style to the mixture of the new and old doors.Aqua Blue FalmouthEx wall protection panels were installed along the cubicle area corridors and in the cubicles themselves protecting from damage which is caused by the movement of equipment and trolleys.A Yeoman Shield Clapping Lath was applied to the double swing doors of the X-ray room. The lead lined clapping lath was fitted to the inside of the room doors to prevent any leaking of X-rays through the gap between the meeting edges of the door set.“I am very pleased with the way that the Yeoman Shield products look and from past experience know that these products will help to keep the new unit looking smart for some time to come.” Concluded Mr Bushell.

Gradus has supplied and installed a range of bespoke wall protection solutions throughout the ground-breaking new Proton Beam Therapy Centre at The Christie NHS Foundation Trust in Manchester. Gradus supplied and installed its SureProtect Pure® hygienic wall cladding in White and Iceberg shades. Specially designed to create an impermeable barrier to moisture and bacteria it features a smooth, easy-to-clean surface to ensure a hygienic solution that meets ‘Health Building Note 00-09: Infection control in the built environment’

EVAC-ALERT, C-TEC’s powerful BS 8629 compliant evacuation alert system is protecting seven high-rise residential tower blocks in the heart of London. Guinness Square in Southwark and the Houses of Aubin, Clemoes, Maitland, Sherratt, Southgate and Sweeting in Brixton’s Loughborough Park are all managed by The Guinness Partnership, a 130-year-old charitable organisation that prides itself on providing high quality homes to improve people’s lives. The upgrading of the life safety systems was deemed vital to ensure the protection of residents living in the properties.Orestone Controls, the BAFE SP203 and SP207-accredited specialist systems integrator, was tasked with equipping the blocks with fully BS 8629 compliant evacuation alert systems to assist the Fire and Rescue Service (FRS) in evacuating part, or all, of a building in an emergency.  Ryan Mullen, Orestone’s CCO said: “Demand for evacuation systems is at an all-time high due to a combination of improved fire safety standards and new legislation. We’ve particularly noticed an increase in enquiries and orders since the new Part B of the Building Regs came in last year, as this says they must be installed in all new high-rise residential buildings over 18m in England. The new HSE ‘Be Ready’ campaign will also no doubt trigger new contracts with local councils and private companies over the next six months.”Ryan said: “We chose to specialise in EVAC-ALERT primarily for the ‘handholding’ service C-TEC provides, namely the first-class technical support that is so important on life-safety system projects. From the very first demonstration of EVAC-ALERT at our offices, to where we are today, C-TEC has supported us and our relationship has gone from strength to strength. We are experts at installation, highly conversant with the standards and because of this we have had to expand our fire division again with additional dedicated engineers to deal with growing demand. We have also started to work for other Housing Associations including GreenSquare Accord on some of their high-rise buildings.”As BS 8629 is a relatively new standard, C-TEC is very keen to ensure to educate people about its requirements. Throughout a project, the company is there to make life easier for the client, be that the consultant, the installer, the owner or building management company and they can assist with plans, technical drawings and the loop calculations required.By using the unique evacuation alert system software created by C-TEC’s R&D team and undertaking an assessment of a building, Orestone calculated exactly which devices are required. Special requirements for, say, elderly, vulnerable and disabled residents, were also taken into consideration. For example, visual indicators, vibrating pillow pads, etc. C-TEC also provided free advice and training on commissioning, cause and effects.  Ryan said: “Our engineers are constantly expressing how simple and intuitive EVAC ALERT is to install. The wiring is very straightforward and the flat interface units give you confidence that any short circuits will be isolated protecting the integrity of the loops. There’s no doubt that the system’s simplicity has allowed us to achieve minimal disruption to residents and work around their busy lives as we can be in and out of each flat in under an hour.  “Customer satisfaction is very important to Orestone and we consistently score five out of five on reviews. We take time to engage with residents and explain how the systems we are installing are designed to protect them. At Guinness Square we even held a joint open day with The Guinness Partnership to showcase the technology to residents, which the London Fire Brigade also attended and which was very successful.”The systems in each high-rise typically consist of 2-loop control panels connected to a host of single and multi-way interface units, self-testing sounders and visual indicators. Simple and intuitive, with manual controls to allow firefighters to easily operate the evacuation alert devices located inside flats on a floor-by-floor basis, the panel is stored in a secure vandal resistant cabinet which can only be accessed by the FRS using a special copy-protected key.Peace of mind that there is a Plan B if everything else goes wrong is crucial in the current climate, not just for owners and residents, but also for the fire service. By installing an evacuation alert system, building management can be confident that every precaution possible has been taken to protect the people residing in the property.EVAC-ALERT is powered by C-TEC’s CAST protocol and is fully compatible with ENVISION, its powerful new Cloud-based fire alarm remote access, service and site management software package which can be used to provide duty holders with a verifiable audit trail of system activity and device testing. 

Architect: Faulkner Browns ArchitectsInstaller: Topfix InteriorsProduct: ‘Shiluvit’ by Oranit1000m2 of PEFC Certified Shiluvit panels from Oranit were installed to the ceilings of the swimming pool and gym areas at the new sports facility St John’s School in Leatherhead.Faulkner Brown Architects specified Yellow Pine panels with a white stain for the space, choosing 7-502 modules with 22mm wide by 45mm deep blades with 40mm gaps for impressive acoustic control.Oranit is a specialist ceiling solutions suitable for most installation areas. As standard it is impregnated for Euroclass B,s2-d0 for resistance to fire, achieving top results against surface spread of flames, smoke production, and flaming droplets or structural integrity in case of fire.Additionally for this installation the panels were lacquered for humidity resistance, this treatment provides additional protection to the wood against water damage and can also be used for panels being installed outside.

The 760,000 sq ft development will bring the Old War Office back into use, creating a world class 5-star hotel and 85 apartments. Works will include developing a six storey basement and constructing a three storey roof extension. The venue has been designed by UK-based EPR Architects, with the hotel interiors designed by New York-based designer Thierry Despont, and the residences by 1508 London. A1 Fire Rated Breather and Vapour FR Membranes were used to protect the insulation and building interior, maximizing its energy efficiency and value.

Abu Dhabi International Airport’s Midfield Terminal Complex (MTC) is set to be the largest airport terminal under one roof. The airport is spread over a vast area of 34,4 km2, and this development will dramatically increase passenger capacity to over 30 million. Terminal spaces of this size have to withstand high temperatures in the event of fire, and with major foot traffic, floor coverings and walls must be hard-wearing, hygienic and offer outstanding aesthetic appeal. For protective and powder coatings, to ensure the project was first-class right from the start, the specifiers turned to Jotun.

A significant milestone for not just the tidal sector, but for the development of renewable energy technology, Scottish engineering company Orbital Marine Power, Ltd. (Orbital) will soon launch the Orbital O2 – the world’s most powerful tidal turbine – in the waters off the Orkney Islands.We have been involved in the project since Orbital’s prototype SR2000 turbine was built in 2015, proving their technology and leading the way for the further optimised O2. As well as high-performance anti-corrosion coatings to protect the steel structure, we supplied Hempaguard X7 for the turbine rotor blades.

PhotonCheck-A1 VCL Protects Katara Lusail Hotel Qatar

application area: domestic heatinguse type: gas fireplace project scope: restore fireplaces, rebuild chimney, line chimney ductadded value: 25-year guarantee on liner, quick and clean install, non-destructiveBackgroundThe camera survey revealed cracks in the chimney flue of a large victorian house in Muswell Hill. To protect against carbon monoxide leaks, the chimneys had to be lined before the gas fireplaces could be fitted. A flexible and uninflated FuranFlex tube was placed inside the chimney duct. Each FuranFlex liner is produced to fit the dimensions of the duct. Hot steam is used to inflate and harden the liner, fixing it in position.Statement of workThe installation took one day per chimney. The jointless and air-tight liner provides good draught and a clean and safe operation for the fireplaces. When FuranFlex liners are inflated they take up the shape of the chimney, providing maximum lined diameter and natural draught.

A complete wall protection package from Gradus has been installed at the 3Ts development (Trauma, Teaching and Tertiary care) for the Royal Sussex County Hospital. The project, planned in three stages, comprises of the replacement of the buildings to the front half of the Royal Sussex County Hospital. In their place will be two brand new clinical buildings and a much-needed service and logistics yard.

In this wooden building in the center of Vienna, the walls, ceilings and floors are made from solid wood(CLT). The construction protection covering and sealing for the individual elements were achieved with the SIGA products Wetguard and Rissan.

The fire station is relocating from Dale Street, Ossett, to nearer Wakefield city centre as part of West Yorkshire Fire and Rescue Authority's Integrated Risk Management Plan and replaces the current near Ossett town centre. The new location will enable crews to support the Combined Aerial Rescue Pump based in Wakefield. Coun Tracey Austin, West Yorkshire Fire and Rescue Service vice chairwoman, carried out the ground breaking ceremony. She said: "This marks the start of a very exciting project in Wakefield district and I am looking forward to seeing the new station taking shape.”

The Westminster Fire Station restoration and regeneration was all about creating an experience for those that live there, with sustainable and natural materials,” says Jennifer Benningfield, experienced architect and founding principal of Openstudio Architects.v “We needed to find a reliable supplier of sustainable and natural materials, which were suitable to tie in with the heritage structure. “The challenge was sourcing the right materials that were compatible with the fabric of the existing buildings. Working with Lime Green, we managed to develop a solution that matched the original building’s beautiful aesthetic and historic character. “As a key supplier of lime-based products, their flexibility and reliability helped to make our job easier – and we received a lot of praise for the high-quality and beautiful new courtyard building. The lime mortar is an integral part of the brickwork and proves that it is appropriate for contemporary, as well as historical, structures,” praises Jennifer. About the project Using a team of specialists, Openstudio Architects supported the site team in using old and traditional construction techniques to refurbish and develop buildings in a contemporary way, with beautiful results. “There were two phases to the Westminster Fire Station project,” explains Jennifer. “The first involved refurbishing the existing building, the Grade II Listed Edwardian Fire Station built in 1906 and decommissioned in 2014, to create a restaurant and bespoke housing. “The second involved developing the site further by adding a new residential building to the rear of the site surrounding a garden courtyard, which is where we used Lime Green’s mortar.” Supporting the local community “The project was situated on a very constrained and challenging site,” continues Jennifer. “With its central location, the construction works undoubtedly had an impact on those living and working in the local area, which is why we wanted to ensure the community were completely happy with the project. “As we wanted to make sure the new build tied in with the older fire station, there were inevitably challenges that we didn’t anticipate along the way. However, most importantly, we needed to ensure we sourced the right materials, which were compatible with the existing building, both in terms of performance and appearance. Selecting the right materials “We wanted to work with natural materials, which would age well and ensure robust construction that has longevity and sustainability,” says Jennifer. “We chose specific products, including handmade Danish bricks and handmade glazed bricks to give depth and texture to the new building. We wanted to ensure use mortar that had a texture and a grain to it, so it would work with the nuances of the bricks, as well as being a colour match. “Finding the right colour mortar to match the pale Danish bricks was key. These bricks were handmade, so we needed the mortar that integrated with the historic Edwardian building to create a seamless whole. “When planning the project, we recognised the importance of lime products, because of the material’s sturdiness and robustness. This means it doesn’t wear with structural movements and changes in the seasons. “That’s why Lime Green was the perfect fit for the project. With an extensive colour range, the team was able to colour-match the mortar with the materials of the new building perfectly. The consistency between the samples Lime Green gave us and the final product delivered was incredible, which was important given the scrutiny by Westminster City Council over the project and the appearance of the new building. “The flexibility of the products also helped us to minimise the amount of movement joints, as it accommodated movement in a much more forgiving way than other products, such as modern cement mortars. “We really enjoyed working with the Lime Green team – they were easy to work with, responsive and very supportive of the project. As we couldn’t store a huge amount of supplies on site, Lime Green was very accommodating in delivering exactly what we needed, at the right time. “The best part was that we were able to develop a solution with Lime Green that supported the original building’s beautiful aesthetic and historic character, with a new building that pays similar attention to detail.” A sustainable, natural and beautiful finish “People love the building, and neighbours even call it ‘the golden citadel’. It’s widely recognised in the local community for its high-quality, beautiful finish,” continues Jennifer. “One of the Fire Station’s previous residents – who had moved out during construction – has moved back after the restoration works and loves the development. That was the icing on the cake for us, it really felt as though our vision had materialised – enhancing people’s experience of new buildings made with sustainable and natural materials that stand the test of time. “The Westminster Fire Station development truly looks beautiful, and the quality of the natural and sustainable products used has a huge role to play in that. Lime Green’s product quality and customer service is outstanding. We’re already working with Lime Green on another project, and we can’t wait to see the finished result,” concludes Jennifer. “It was a pleasure to see our Hydraulic Lime Mortar used on this new development project. We’ve loved working with Openstudio Architects on Westminster Fire Station, and we’re glad to be working with them on their next project,” comments Simon Ayres, co-founder and managing director, Lime Green Products. For more information about the Westminster Fire Station project and the products used, visit Lime Green or call 01952 728 611.

MSA Safety’s recent Height Safety Day gave nearly 100 workers at INOVYN’s Runcorn site a first-hand look at how the global safety equipment manufacturer is innovating in fall protection and brought them up to speed on the latest regulations. The information day took place at the INOVYN site in Runcorn, owned by INEOS Group, a global manufacturer of petrochemicals, specialty chemicals and oil products.

Raybloc (X-ray Protection) Ltd takes great pride in presenting our latest case study showcasing our outstanding collaboration with Singleton Hospital in Swansea. This partnership entailed the manufacturing and installation of cutting-edge radiation shielding solutions, including a Frameless Operator Screen, a wide range of lead-lined doorsets, and internal viewing windows to match. As well as these fixings, Raybloc also supplied and installed the lead-lined wall panelling to the controlled areas, making the process of lead shielding as simple and hassle-free as possible for the contractor and Trust. These advanced products not only prioritise the safety of patients and staff but also significantly enhance workflow efficiency and create a therapeutic environment.

Profab Access adds a five star finish to Cardiff’s newest luxury hotelLeading riser door and access panel solution supplier, Profab Access, has proven its first-class credentials once again as part of the recent completion of a major specification at Cardiff’s new 5-star Parkgate hotel. Located next to the Welsh Capital’s famous Principality Stadium, the Parkgate hotel has been designed to provide a luxurious experience for rugby fans, in addition to city dwellers visiting the country all year round. Widely coined as Cardiff’s most lavish new location, the hotel includes 170 guest bedrooms and suites, a signature restaurant and bar, a traditional tea lounge and a rooftop spa overlooking the city skyline. As part of the prestigious build, a unique collaboration between the Welsh Rugby Union, property developer, Rightacres, and The Celtic Collection, the hotel required an extensive riser door specification, with safety, high performance and aesthetic appeal key considerations.In total, 310 Profab Access VEGA 1500 Fire Rated Riser Doors were specified for installation by Hazelwood Carpentry throughout every part of the building, including communal areas and the hotel’s vast range of luxury guest rooms and suites.The VEGA 1500 Series Riser Doors offer the highest standards of fire safety, extensively tested by Efectis in France and Ireland to provide a bi-directionally fire tested product that is available in both single and double door configurations.  This means the riser door sets are fire tested from both sides to 60 minutes, providing the specifiers, contractors and hotel guests residing within the building with confidence the critical fire integrity products offer the highest standard and most up to date evidence for fire safety performance.The range also features a slimline, neat construction, whilst its proven technology ensures permanent, safe access to mechanical and electrical services housed within the riser core. This provides first class functionality and safety, without compromising the overall interior concept.The steel riser doors also streamlined the installation process, as the quick release pivot hinge and light weight enabled easy handling, allowing Hazelwood Carpentry to complete the job quickly and optimise overall project efficiencies.Jamie Homer, Senior Site Supervisor at Hazelwood Carpentry, said: “As a remarkably impressive build designed to bring a new age of modern luxury to Cardiff’s historic setting, it was important we used the most innovative, highest quality products.“From the start it was clear that there was no contender to Profab Access and its unrivalled capabilities when it comes to high performance, quality fire rated riser doors.“The Profab Access team recommended the VEGA 1500 Series, which proved a fantastic choice, as it was incredibly easy to install and offers a superb finish, whilst ensuring the highest standard of fire integrity. Plus, being manufactured in the UK ensured quick lead times, which was essential in keeping the project on track for its opening this autumn.“As usual, the team, who we have worked with many times before, were incredibly helpful and quick to respond to any queries. Needless to say, we look forward to working with Profab Access again on future projects to come.”In the event of a fire, the VEGA 1500 Series Riser Door sets will maintain the frame and integrity for up to 60 minutes, preventing the spread of fire throughout the property for this period of time.The riser doors are 31dB acoustic rated, smoke sealed and airtight to Part L, whilst also featuring intumescent smoke seals that enable occupants to safely exit the building. By specifying bi-directionally fire tested VEGA 1500 Series Riser Doors, the development is actively future proofed as the comprehensive testing certification provides a complete and transparent audit trail of due diligence that evidences the products are not only fit for purpose but meet the duty of care required to ensure legal compliance.Marcus Parnham, Commercial Director at Profab Access, said: “At a time when the hospitality sector has been subject to so much disruption, the Parkgate hotel will play a key role in attracting rugby fans during the peak international season and revitalising the city’s appeal to visitors looking for the ultimate luxury stay.“The pedigree of our VEGA 1500 Series fit the brief perfectly. Combining functionality and visual appeal, the specification has enabled great performance without comprising aesthetics. More importantly, the specification of our bi-directionally fire tested line ensures the building features the highest levels of riser shaft fire protection currently available on the Irish and UK markets.” Profab Access’ diverse portfolio of riser doors and access panels are supported by a wide range of BIM Level 2 and CAD files to aid the specification process and streamline the initial design stages.Manufactured at Profab Access’ Atherstone headquarters in accordance with ISO 9001, the 1500 Series Riser Doors can be specified and installed in a range of configurations to meet each project’s specific measurements and requirements. For further information on Profab Access and its range of access panels, riser doors and steel doors, call +44(0)1827 719051 or visit https://www.profabaccess.com.

Chelmer Waterside near Chelmsford in Essex, is a residential-led riverside quarter, delivering new homes and public spaces south-east of the city centre. The site of a former gas works, the land is being regenerated to offer high quality affordable housing on the River Chelmer peninsula.SURFACING REQUIREMENTAddagrip approved contractor The TP Group was appointed by Taylor Wimpey to assist with various aspects of the project, including Landscaping, Painting, and Fire Protection. They were also pleased to help with a very demanding first floor level crescent and second floor walkway within the heart of the ongoing development.Many logistical challenges of surfacing the podium decks were managed and overcome, alongside time restraints and weather conditions. The original plans of using pedestal paving were shelved due to time restraints and material availability. Following discussions, an Addagrip Terrabase Classic Resin Bound no-dig gravel system with a Stonebound finish was selected as the surfacing product due to speed of installation, aesthetics and availability.The TP Group installed a 365mm deep substrate, consisting of various materials, for the podium balconies on the first and second floor level ready for Addagrip’s Terrabase Classic resin bound system. A Stonebound 6mm bespoke blend was selected as the Terrabase Classic resin bound finish with 297m2 being installed on the first floor level crescent and 66m2 on the second floor walkway.The new paving offers a decorative, low maintenance surface with excellent slip resistance.The installation was completed in January 2021.

UNITE is the UK’s largest provider of student hospitality and accommodation. UNITE focuses on the provision and management of high quality, well-located student accommodation and hospitality services at affordable prices.Our patented 𝗦𝗘𝗖𝗨𝗥𝗔𝗕𝗟𝗜𝗡𝗗𝗦® which are Secured By Design approved were installed in selected accommodation and on-site hospitality management offices providing security for the students and offices whilst making sure rooms felt welcoming and homely.Steve Pinder, National Security Manager at UNITE said; “My role within UNITE is to look after the security needs of all managers within the business and our student customers who live in our accommodation. The safety and security of our 38,000 student customers is of high priority to us. I look after physical security, CCTV, access control, locks, doors, windows and anything to do with the security internally or externally. CCTV is a major part of our every day lives, it deters criminal activity but it doesn’t solve crime. 𝗦𝗘𝗖𝗨𝗥𝗔𝗕𝗟𝗜𝗡𝗗𝗦® is a trusted partner of UNITE and are integral to the overall physical security decision process. When looking to enhance the security at a small number of our sites, 𝗦𝗘𝗖𝗨𝗥𝗔𝗕𝗟𝗜𝗡𝗗𝗦® was the only supplier that met our requirement to better protect our accommodation and our customers. We have also used 𝗦𝗘𝗖𝗨𝗥𝗔𝗕𝗟𝗜𝗡𝗗𝗦® to secure our on-site hospitality management offices.”“The 𝗦𝗘𝗖𝗨𝗥𝗔𝗕𝗟𝗜𝗡𝗗𝗦® system has been effective and a great success for us because of the versatility of the blinds. It allows for the windows to be opened while still having window security. We have not had any security incidents since and 𝗦𝗘𝗖𝗨𝗥𝗔𝗕𝗟𝗜𝗡𝗗𝗦® has never been breached.""𝗦𝗘𝗖𝗨𝗥𝗔𝗕𝗟𝗜𝗡𝗗𝗦® looks like traditional vertical blinds yet it is an effective deterrent because each aluminium blind blade has a steel rod within it. We haven’t found another product that is better or more cost effective. “The feedback we get from customers is that when they see their room and see the blinds, they are reassured by having this added protection on the window. We didn’t want to put grilles on the windows as our student accommodation is like a home from home. Presently 𝗦𝗘𝗖𝗨𝗥𝗔𝗕𝗟𝗜𝗡𝗗𝗦® has been solely retro fitted, however longer term UNITE may look to design-in 𝗦𝗘𝗖𝗨𝗥𝗔𝗕𝗟𝗜𝗡𝗗𝗦® for their future developments. The fact that 𝗦𝗘𝗖𝗨𝗥𝗔𝗕𝗟𝗜𝗡𝗗𝗦® have their own installation team has always been a benefit and the product has always been delivered on time and to budget.” Steve Pinder, National Security Manager at UNITE

Glasgow Harbour is one of Clyde Waterfront regeneration projects. This regeneration development will benefit Glasgow and Scotland economically and socially. Major infrastructure works have been carried out along the Expressway at Glasgow Harbour with £25 million spent on local roads improvements. In addition to its residential and commercial facilities, Glasgow Harbour also have features around 50 acres of open public space, and approximately 3km of waterfront walkways. Effisus A1 Fire Rated Breather FR Membrane, was the chosen membrane to protect the new façade against moisture, driving rain and wind.

Roché are proud to be a specified supplier for Transport for London (TfL).Our shutters are installed throughout the TfL underground and overground network, including the much-anticipated, state-of-the-art Crossrail (Elizabeth Line) project.By collaborating with Walker Construction, amongst others, on various TfL projects, we are playing our part in keeping the capital moving and improving the vital transport infrastructure.Roché’s aluminium and steel shutters are installed on station entrances, ticket offices and kiosks (including Krispy Kreme and Lola’s Cupcakes). Our fire-rated shutters are keeping people safe, whilst security-rated shutters are protecting property.

Mono M311 Glass Infill Top FixOrbis OS211 Glass Infill Top Fix As part of the North West Fire PFI scheme, the Southport Community Fire Station provided improved facilities for Merseyside Fire and Rescue Service and the North West Ambulance Service.The client’s main objectives were to create well designed facilities to a high architectural standard and provide a safe and healthy environment. Designed and built by Balfour Beatty Construction, this new 6 bay station included community-orientated facilities, training facilities, rest rooms, additional office space and two staircases.In line with the client’s vision, Delta Balustrades were appointed by Balfour Beatty to design, supply and install handrails and balustrades to both staircases and an external balcony area. Combining a minimalistic look and feel with a high quality stainless steel finish, the Mono system with clear glass infill panels was chosen for the main staircase. For the rear stair and external areas, the Orbis system with powder coated uprights was chosen.

A busy recycling centre in Coedcae Industrial Estate, Pontyclun South Wales, suffered from a crippling fire that destroyed one-third of the building leaving the rest in severe disrepair from fire damage.Garland Technical Manager, Dale Thomas, was instructed by long-term partner Cushman Wakefield to assess the extent of the damage and secure the optimum waterproofing system to get the warehouse unit returned to its former glory as a hive of activity for the local area.Dale conducted a thorough condition survey and supplied a detailed written report to the client, highlighting the severity of the building damage and the poor condition of the existing roof sections and walls. Approximately 2,000 sqm were either damaged beyond repair or had fallen into a state of disrepair, meaning that a full refurbishment of all roof and wall sections was required before the optimum waterproofing system could be implemented.

HAG took great pride in being selected to install industrial doors at the new headquarters of Dorset Fire Service, a project envisioned by Prince Charles, now King Charles. This £3 million architectural marvel embodies grand neo-classical design, complete with a mock balcony, presenting unique challenges for our installation team. With meticulous attention to detail, we ensured that our industrial doors seamlessly complemented the three-storey fire station's aesthetic while delivering the high levels of security and user convenience demanded by the situation.Our industrial Q Doors emerged as the perfect solution, striking a harmonious balance between breathtaking aesthetics and the structural robustness essential for this prestigious undertaking. This collaboration exemplifies HAG's commitment to marrying form with function, enriching architectural masterpieces with innovative security solutions tailored to meet the most exacting standards.

These automated vehicle gates were designed, fabricated, and installed by Premier Security & Fire Consultants Ltd on behalf of our instructing clients, Clarion Housing Group and OPENVIEW GROUP LIMITED.The project, in Croydon, South London, required Secured by Design and BRE LPS1175 SR2 security standard, all covered by Premier’s extensive catalogue of officially tested products.For more information call us on 0208 559-8295 or go to our website www.premier-ssl.com.

Yeoman Shield HessianEx wall panels at 1250mm high and 50x50mm Corner Protection Angles in Lilac was fitted on the ground & 1st floor corridors and plaza area. HessianEx panels, cut to 300mm wide was fitted as an attractive protection strip in waiting areas, to protect against chairs being pushed up against walls and causing marks and scuffs.