"electric fires and room heaters"

TekTherm™ AK-FR A2 Fire Rated Thermal Break

After carrying out a fire door survey, Warwick Hospital undertook measures to protect and refurbish the fire doors throughout their sterilisation unit with Yeoman Shield door protection products.Catering for the sterilisation requirements for all wards and departments within South Warwickshire NHS Foundation Trust as well as GP surgeries and clinics, the department is a hub of activity. The movement of heavily laden trolleys and equipment around the unit had caused impact damage to the department’s doors around door edges, glazing beads and the door fronts. Damage to these particular parts of a fire door can render it unfit for purpose.In this instance Yeoman Shield fired rated door protection products were used to refurbish and then protect from further impact damage. Door edge protectors were fitted to the leading and meeting edges of the doors with door protection panels installed to a height that would shield the most vulnerable areas.For additional protection, particularly to ward off blows to the glazing bead section of the doors, Yeoman Shield’s rub rail was fitted to the face of the door just below the vision panels. Colours of Blue and Red were chosen to distinguish between the contaminated and sterile areas within the unit.Yeoman Shield door protection products come with current and relevant fire certificates and do not affect the integrity of a fire door when installed but will continue to protect from detrimental impact damage for many years to come.Malcolm Bloxham Reactive Supervisor commented “We have used Yeoman Shield for many years and find their door protection products perfect for maintaining our fire doors in good working condition, helping to reduce our door maintenance costs by minimising repair and replacement requirements.”

Oscar Acoustics achieved a 90-minute fire rating at BRE Group’s testing facility for its Iso-Mount Type1 acoustic ceiling hanger. Iso-Mount Type1 significantly reduces transmission of noise from the floor above with minimum ceiling height loss. The mount was tested to BS EN 1365-2:2014 Fire Resistance Tests for Loadbearing Elements at BRE Group’s laboratory in Watford in December 2018. Iso-Mount Type1 can be specified for projects ranging from house conversion to flats, both new build and renovation, as well as shops, restaurants and other commercial soundproofing applications.

Using Solo Onecoat Lime Plaster to restore walls in a fire damaged home

Striking the optimum balance between aesthetics and fire safety in glazed partitions is a reality with new additions to the SYSTEMGLAS® range from passive fire protection market leader Promat UK. Utilising the proven fire resistant material PROMATECT® H, two new Promat SYSTEMGLAS® options give designers and contractors the scope to create frameless, butt-jointed glazed screens that maximise light transmission, whilst offering fire integrity and insulation (EI) fire protection for 30 or 60 minutes.

Customer ordered our fire rated FlipFix panel. We dispatched the same day and the customer received their access panels the following day. Customer comments:-"Easy to order and delivery was quicker than expected which was a bonus for us as we were able to complete the job earlier than planned."

Promat UK is providing architects with a 360 degree ‘wheel of assurance’ for SYSTEMGLAS® fire resistant glazing systems. Guidance is offered at every stage of the project, the system is manufactured in-house, it is fitted by a network of approved installers and a certificate of conformity is issued upon completion by a Promat specialist. Promat can provide this assurance because it is in complete control of the design and manufacture process, and it has in-depth knowledge of the installation requirements. This means supply chain risks, such as product substitution or poor installation, can be eliminated.

Split over basement, ground and three upper floors, the Charles Doll Building on Grape Street, London, offers a contemporary and functional specification in this stunning office refurbishment. The development mixes industrial elements with a crisp modern aesthetic by carefully combining characterful architectural features, including vaulted ceilings with exposed brick and steelwork.Named after its architect Charles Fitzroy Doll, the building is clad in decorative thé-au-lait (“tea with milk”) terracotta – Doll's use of grand façades is understood to have resulted in the expression, ‘all dolled up’. The first floor has been fitted out to a high standard with office furniture from Vitra, providing the perfect space for those who want to move in and get straight to work.The lobby mixes vibrate contemporary wall art with industrial light fittings and brickwork. Forza’s in-house CAD team planned the bespoke black oak Firescreen partition wall to match the architect's design. As a market leading passive fire product, this Firescreen provides both integrity from Smoke and Fire and insulation from heat. This is important because in a fire emergency heat has been shown to ignite secondary fires to items, such as curtains or carpets, that are near the other side of non-insulated partitions.Via the Thinking Space Design & Build, Forza Doors supplied twenty FD30 Fire Doors with stained frames and skirting boards to match throughout the five floors of The Charles Doll Building. Chosen to match the steelwork throughout the development, the dark satin finish of the doors was selected from Forza’s Creato range of dyed veneers. This ‘Illunis’ finish is one of twelve fashionable choices in the range. Dyed veneers are an increasingly popular choice with designers as they offer cost savings over stained veneers without compromising quality.The Doors with glass vision panels, required to allow light through to the stairwells, feature our flush and quirk bead. A minimalist design option where one side of the doors is completely flush right up to the glass vision panel and the other side has a very simple elegant bead detailing.

Designing, specifying and installing fire rated timber framed butt-jointed glazing is now easier with the assurance of a fully traceable supply chain with the launch of SYSTEMGLAS® Ligna by Promat, one of the country’s leading manufacturers of fire, thermal and acoustic solutions. Ligna gives designers the ideal balance of assured fire protection and maximum light transmission in all kinds of timber framed glazed partitions and screens. Ideal for offices, healthcare, education, retail and public sector applications, it has been tested to provide integrity and insulation (EI) fire protection from 30 minutes up to 60 minutes (EI30 to EI60).

The project was to refurbish the roof and improve the drainage and insulation and bring it up to current building control standards. A thermographic survey of the roof was carried out by IKO, which confirmed that it was sound enough to have an overlay of IKO UXPL bituminous membrane rather than stripping it back and rebuilding. IKO UPXL was primarily chosen by the client for the 30 year guarantee. One section of the roof to be repaired was on top of dormers. Flame-free IKO UPXL membranes were used because of the potential fire risk of the abutting pitched tiled roof.

Ahmarra manufactured Q-Mark certified FD30 fire doorsets for Octavia House School, an independent specialist therapeutic school in Great Baddow, Essex. Selected from our Education Range, the pre-hung doorsets were manufactured from sustainably sourced FSC® certified timber and supplied with fully compatible ironmongery. The client chose colourful Formica F6901 Vibrant Green, F8820 Leaf Green, F4177 Lime and F8755 Lemon high pressure laminate facings, in line with the Octavia brand’s colour scheme.

Premier Security & Fire fabricated and installed three Secured by Design steel security gates and fencing for instructing clients MDP Communications Services at their project in King’s Cross, North London.Premier’s gates have been tested by the BRE (Building Research Establishment) achieving LPS1175 SR2 security status and sit alongside our dual-certified LPS products in a portfolio of more than 250 designs, including communal entrance doors, screens and curtain walling.Check out our website for more information. www.premier-ssl.com

Fully certified products from the range of TBA FIREFLY™ have been employed to protect a potentially vulnerable roof-space above a doctor’s surgery in Chingford, Essex, ensuring any outbreak of fire could not spread to other parts of the building. The work on the property owned by Peabody Estate has been carried out by Wickford based T & R Fire Protection on behalf of another industry expert, LMAC Fire Systems, also from Essex. The two companies regularly cooperate on such projects as landlords continue to maintain and improve the fire safety performance of existing buildings.In the case of the Chingford surgery, FIREFLY™ Apollo Lite™ 30:30 was specified along with the manufacturer’s widely utilised Collaroll, High Temperature Adhesive and 12mm stainless steel staples. In addition to protecting the sides of the 2.8 metre high pitched roof-space, creating fire barriers and wrapping multiple beam ends with the Collaroll, T & R also installed one of FIREFLY'S Access Panel FR 120 units. These have been stringently tested against EN 1363-1 2020 and are third party certified by IFC, being shown to achieve an impressive two hours fire resistance from either side of a fire compartment. Intended to be fitted vertically, the heavy-duty construction of the Zintec steel door and unistrut frame ensures the assembly offers a tight and flush fit when closed, and robust performance in use.The Director for T & R Fire Protection, Tom, commented: “We’ve used APOLLO Lite™ and other FIREFLY™ products on many hundreds of projects in the past, FIREFLY™ is our ‘go to’ manufacturer when it comes to fire compartmentation. There are many older properties which have no fire compartmentation in their roof spaces and in the case of the Chingford doctor’s surgery, the landlord – Peabody – asked us to carry out an inspection and come up with a fire strategy. We base our recommendations and design drawings on FIREFLY'S standard details and, once they’ve been approved go in and install the fire barriers. The work involves breaking the loft-space down into a number of compartments with one of the Firefly access panels providing safe passage between them. The installation has gone very well, though there is a lot more of this type of work to be done across the country in many sectors.”The APOLLO Lite™ 30:30 has been developed for use in vertical separation or compartmentation situations, offering 30 minutes integrity and insulation and is straightforward to install for an experienced contractor. It is widely specified to form fire barriers within roof voids and floor voids in many different property types, including multi-storey flats and commercial premises.

FIREFLY™ PHOENIX Offers Temporary Fire Protection For Fenchurch Street OfficesThe refurbishment of two complete floors to one of the City’s largest office buildings is making use of the well proven and versatile TBA FIREFLY™ PHOENIX smoke & flame barriers, to create temporary fire barriers while the work is being carried out: protecting people and property across the rest of the five storey structure where business continues as normal.The project at 30 Fenchurch Street, EC3 is being led by Overbury – one of the capital’s most experienced fit-out contractors, while the London office of HLW Architects is leading the design team. T&R Fire Protection meanwhile is the specialist sub-contractor carrying out the installation of the PHOENIX around the atrium, as well as other passive fire protection measures as the scheme evolves.In total T&R has fixed 22 rolls of the lightweight PHOENIX material to create the two hour integrity smoke and flame barriers around the glazed edge of the floor plates at levels Three and Four of 30 Fenchurch Street. The lightweight barrier has been fixed to the bulkhead and at intervals down all of the existing columns, before finally being secured across steel angle sections bolted to the floor slab.IFC Certification duly inspected all 160 metres of the temporary barriers – up to 3,300 mm in height - once installed, on behalf of Overbury and duly issued a certificate of compliance. The permanent works are expected to include creating fire breaks within the ceiling zones at 20 metre intervals, as part of T&R’s overall contract for Fenchurch Street in the region of £250K.The Site Manager for T&R Fire Protection, Tom Port Smith, commented: “We’ve used PHOENIX and other FIREFLY™ products on many hundreds of projects in the past, but in this case it was the insurers for the project who insisted on the installation of the screens to protect the atrium while the sprinkler system was being replaced. The installation though was relatively straightforward and in our work generally, FIREFLY™ is our ‘go to’ manufacturer when it comes to fire compartmentation. We base our recommendations and design drawings on TBA FIREFLY™ standard details and, once they’ve been approved, go in and install the flexible fire barriers.”Tom, like the majority of T&R Fire Protection’s operatives, has attended training sessions at FIREFLY's premises in Rochdale, reinforcing their trade skills and gaining valuable insights into the performance parameters of the different barriers in the range.FIREFLY™ PHOENIX is a lightweight smoke & flame barrier developed to enable compartmentation within buildings to provide up to 120 minutes’ integrity under BS476 Parts 20 & 22. Certified by IFCC, the flexible and straightforward to install material and is suitable for both new-build and retrofit situations.Manufactured from woven and non-woven glass, the FIREFLY™ range is designed to optimise resistance to flame and smoke as well as offer heat protection in a wide range of scenarios. The flexible barriers are easy to install horizontally or vertically using a full selection of ancillary products. Used mainly in the construction industry across the UK and Europe, FIREFLY™ Fire Barriers help to contain fire, giving building occupants extra time to evacuate and the fire service to enter safely.

Rockpanel is busy working across the UK on projects where regulations amended in 2018, regarding buildings over 18 meters high, mean their exterior cladding systems must comply with stringent fire safety performance characteristics. One such project sits at the heart of the Bermondsey Spa area, near to the River Thames and Tower Bridge in London.

Premier Loft Ladders have made choosing and specifying your next fire rated loft ladder even easier. Product data for the high-spec Isotec loft ladder is now available within NBS Plus. The Isotec offers superb strength and very high thermal insulation. It also provides fire protection for up to 120 minutes. As such, it is a great solution for a wide range of projects. To help designers and architects, Premier Loft Ladders has made technical data for the Isotec fire rated loft ladder available within NBS Plus. It can be found within section L30 (clause 421).

VANDALISM to schools’ property is a continuing issue but one that is being addressed by Premier Security & Fire Ltd.Working in partnership with Swedish company Hammerglass, Essex-based Premier is providing security options that include unbreakable glass for windows and doors. Several London schools and colleges that have been repeat victims of vandalism have already engaged the company to replace existing installations.Hammerglass is 300 times stronger than traditional glass and weighs half as much. Premier Security & Fire Ltd manufacture and install their own designs, including security options that reach counter-terrorism threat level.If you would like more information, call us on 0208 559 8295.#UnbreakableGlass #SchoolsSecurity #Facades

National Flooring Co Ltd, one of our Approved Contractors was approached by Moy Construction Co Ltd who were awarded a contract to refurbish the swimming pool and changing areas at Perseid School in Surrey. The school offers an educational provision for children with learning difficulties and/or physical/sensory difficulties, and therefore, safety was paramount. As part of the refurbishment a hardwearing, slip-resistant flooring system that offered excellent longevity was essential. The floor had been previously tiled, but due to water ingress, kept failing and required frequent repair. Rising maintenance costs and risk of slips prompted the school to look for alternative solutions and resin became an obvious choice. A Degafloor resin floor provides a seamless, hardwearing, and impermeable finish that will offer years of service. Moy Construction Co Ltd removed the existing floor tiles and installed a new screed prior to the installation of the resin system. From the offset, achieving a floor finish with a suitable slip rating was non-negotiable.The Degafloor QTA system is a quartz trowelled system which can be laid to falls. The system, which is broadcast with a quartz aggregate, provides excellent slip resistance, even in wet conditions, ensuring high levels of safety are always maintained. The project, which included the swimming pool surround and adjoining changing rooms, totalled 145 sqm of floor and 135 lm of cove. The installation was completed over 5 days and to the satisfaction of Moy Construction Co Ltd, who were happy to have the project completed to a high standard, on time and within budget.

Offering a futuristic office environment, Vedanta Resources Ltd, the global mining and metals company, has totally re-vamped their London HQ. Helping transform the offices, partitioning experts Style added flexibility to the space with a combination of advanced operable wall systems. Two 54dB Rw acoustic moveable walls form a corridor, creating a stunning hall of mirrors with pass doors into spacious meeting rooms. Three Skyfold Zenith vertical-rising walls divide those rooms into smaller work areas. An additional partition splits the main boardroom, creating work space for the chairman. The entire area can be opened out for large corporate functions.

Ahmarra manufactured fire doors for Brunel University London, on behalf of the main contractor. Made from sustainably sourced FSC® timber, these doors are faced with Formica’s stylish Terril (F2297) dark grey high pressure laminate. As with all of our Education Range, these pre-hung doorsets were supplied with factory-fitted stainless steel ironmongery, ensuring full compliance.

The steel framing system that was introduced in the UK to provide EI fire protection in butt jointed glazing is now available as a complete, safety-assured glazing system with the launch of the SYSTEMGLAS® Ferro range from Promat UK. SYSTEMGLAS® Ferro is a complete glazing system suited to contemporary interiors with the fire glass, steel framing, beading and setting blocks supplied directly by Promat for maximum traceability. It is installed exclusively by a network of approved installers to ensure total peace of mind for specifiers, backed with the confidence of Promat UK’s 360 degree wheel of assurance.

The Isotec is a heavy duty commercial loft ladder offering up to 120 minutes fire protection. It also offers very high thermal insulation (U value 0.33 W/m2K) and an airtight seal (class 4). Available made-to-measure

Premier Loft Ladders has helped Horizon Construction provide a safe and convenient access solution to a 1st floor plant room within a premium car showroom. What made this project particularly challenging was the 1.8m deep ceiling void. In addition, the access point was also in a prominent location outside the showroom offices. The solution was a bespoke Supreme heavy duty loft ladder. It offered a safe, discrete and easy-to-use solution for access to the car dealership plant room.Read the full case study...

OverviewA successful installation of 40 x Powrmatic SRP U Tubes at a hangar facility in Boscombe. With the system design by Powrmatic, ABS, a leading HVAC and installation company, was entrusted with this significant installation project. The installation aimed to provide efficient heating performance, reduce energy costs, and improve the overall comfort and functionality of the hangar.Project BackgroundThe Weighbridge Hangar Building 499 at MOD Boscombe Down operated by QinetiQ required a new heating system due to the life-expired existing system. The hangar required a powerful heating system that would operate efficiently during the cold winter months while reducing energy costs. A new Powrmatic SRP U-tube herringbone radiant heating system was produced in line with the design intent of WYG on their tender documents. J & B Hopkins secured the M & E contract and employed the services of ABS Ltd to undertake the installation of the radiant heating system. ABS Ltd, formed in 1978, offers a full range of professional services including the installation and maintenance of both radiant and warm air heating systems to both commercial and industrial properties throughout the UK.SolutionThe MOD hangar facility, situated on an exposed location, at Boscombe Down required a robust heating solution to withstand the cold winter months. 40 Powrmatic SRP radiant U Tube PVU50 Hi/Low heaters each rated at 50kW on a herringbone system layout with ducted fresh air onto each burner to comply with fire safety standards were installed by ABS Ltd. To maximize efficiency, the heaters mounted at an impressive height of 23 meters in line with Powrmatic’s design drawings were arranged in 8 lines of 5, with 3 heaters connected to one fan and 2 heaters connected to another fan. The heating system incorporated Powrmatic MC200 controllers and black bulb sensors for precise temperature control across the hangar.ResultThe final stage of the installation was completed by J & B Hopkins, arranging for the necessary gas and electrical distribution services to the radiant heaters and discharge fans. The 40 Powrmatic SRP radiant U Tubes installed by ABS Ltd effectively heated the facility, providing a comfortable and conducive environment for the workforce during the winter season. Additionally, the new heating system reduced energy costs and eliminated the need for multiple exhausts on the rooftop hence retaining the aesthetic design principles of the hangar. The commissioning was successfully carried out when all services were completed, providing a satisfied client with a capable heating installation within the hangar, for the exposed site location.

FIRETITE is a Class A2 fire-rated, clay mineral insulation ideal for new and refurbished cavity wall insulation. This innovative system combines the benefits of a hydrophobic and open-pore mineral insulation material with the fast, safe and seamless airtight process of a self-sealing system.The world's first 3-component clay mineral in-situ insulation material; it has been developed over many years of extensive research to create an exclusive formulation.

Abbott Nutrition develops and markets a wide range of science-based infant formulae & medical nutritionals. Abbott nutrition required hygienic door solutions, windows and transfer hatches for its new manufacturing facility. The factory it the country’s fifth facility under Nestle and is considered to be among the company’s most advanced worldwide.  Dortek supplied Fire rated single action and sliding doors across the facility. Their smooth and seamless construction means there are no ledges where bacteria can gather. Our encapsulated doors are hygienic, easy to clean and 100% waterproof. Dortek GRP doors are ideally suited to milk processing areas and have been installed in facilities worldwide.

An innovative new residential property built on Passivhous principles, located on the site of a former walled garden within a classic Georgian country house estate, utilises Promat SYSTEMGLAS® Celare fire resistant glazing system from fire, thermal and acoustic solutions specialist Promat UK. With the aim of maximising natural daylight, the design incorporates a number of full height modern slim floor to ceiling windows using the SYSTEMGLAS® Celare glazing system. By choosing SYSTEMGLAS®, the architect and builder have been able to benefit from Promat UK’s ‘360 degree wheel of assurance’ for fire rated glazing systems.

Edinburgh City CouncilChampioned as one of the most progressive cities in the UK (and one of the largest) Edinburgh is home to more than 500,000 constituents and an impressive EV fleet of over 150 decarbonised cars, vans, and buses for the dedicated use of the council. With no plans to slow down anytime soon; dedicating themselves to becoming a completely Net Zero city in the next six years.ScopeThanks to funding from Zero Waste Scotland, the council will be welcoming new electric refuse collection vehicles (eRCVs) as part of their goal to electrify the council’s entire fleet by the end of 2024. The new 20 tonne vehicles will help the city to expand their recycling facilities and better support their constituents’ needs.To support the growth of their EV fleet, the council felt the need to expand their chargepoint network, and came to Rolec to devise a plan. New vehicles mean new charging requirements, specifically in this case, the council were looking for ultra-rapid chargers, with the scope to deliver charge to these larger vehicles.The chargers also had to account for the difference in vehicle height and dimensions and therefore needed to be fit with longer than standard cables. Furthermore, with the ever-growing nature of their EV fleet, the council also prioritised chargepoints that could be scaled-up as and when the need arose. SolutionRolec provided Edinburgh City Council with 10 x 80kW UltraCharge 160 chargepoints, each with extended 7m cables and capable of being upgraded to up to 160kW at a later date. Creating a robust and scalable charging network capable of handling the needs of these larger EVs. All of which is backed up by an extended hardware warranty provided by Rolec.They also opted for OCPP 1.6-J hardware to allow them even more freedom with their back-office. Giving the council the opportunity to trial Monta’s software, with the capacity to revert back to ChargePlace Scotland if they wish in the future. Benefit The EV hardware provided by Rolec means the council will be able to meet their environmental aims on two fronts: delivering expanded recycling services to their constituents and cutting fleet carbon emissions at the same time. "We are forever encouraged by local councils who put sustainability at the forefront of what they do, and Edinburgh City Council is no exception. Their continued focus on reducing carbon emissions through advanced policy changes and a passion for fleet electrification has defined this project. It was a pleasure to work with the team and we look forward to seeing their continued development." - Josh Holstead, Business Development Manager, Rolec EV.Project detailsOrganisation:Edinburgh City CouncilPartners:• Rolec EV• MontaIndustries:• Public Sector• Waste ManagementLocation:Edinburgh, Scotland, UKRolec EV Products:• 10 x 80kW UltraCharge 160 Ultra-Rapid chargepoints• Bespoke, extended 7m cablesBenefits:• Permanent installation of an ultra-rapid vehicle charging network to support EV fleet expansion• EV hardware reinforces the council’s green initiatives, specifically the rollout of extended recycling measures

Project typeRefurbishmentContractorWilliam Bowley Projects LtdBrief descriptionRecently retired, the clients were looking to move from London to the bustling seaside town of Poole. They found a chalet bungalow at a desirable location right by Poole Park and only a short distance from Poole Harbour & Sandbanks beaches. However, due to it being previously rented out long term, it was in need of a lot of modernisation.The client’s desire was to create a large steam shower area in the master en-suite with plenty of space for them to relax, listen to music and unwind after a busy day.Due to the size and layout of the existing en-suite, and especially its low angled ceilings, careful planningwas required to provide the client with the desired, spacious steam shower without compromising too much on the floor space.RequirementsSteam shower area with sound & lightingThe clients wanted to create an area for absolute relaxation, a private wellness oasis, accessible only from their bedroom.Required components• watertight and steam-proof components with longevity• spacious seating area• practical storage• sound technology• lightingProducts usedBase products• wedi Vapor 85 building boards with pre-installed vapour barrier membrane (SD value of 92)• wedi Sanoasa Bellina seat element• wedi Sanoasa Bellina carrier element• wedi 610 adhesive & sealant• wedi Tools joint reinforcement tape, self adhesive• wedi 620 sealant• wedi Tools waterproof sealing tape• wedi Tools waterproof sealing corners• wedi Tools washers, stainless steelProducts usedIndividual products• 1600 x 950 x 50mm wedi Fundo Riolito shower element(1100mm channel on the long side and DN50 horizontal drainage)wedi solutionsDesigned & built by the installer• a practical and easy to maintain niche for storage(using the trimmings of Vapor 85 building boards)The required technology was integrated into the wedi elements by the installer, providing the clients with the perfect atmosphere to promote well-being.‘Compared with cement board/aqua panel, wedi is truly a superb system; easy to use and fit, lightweight and perfect for tiling over. I will definitely be using wedi for future bathroom installs’Nick Turner, Director at William Bowley Projects Ltd.

2020 was the first time in history when more professional interactions took place digitally than face to face. It is clear that this type of communication has come to stay and will become a regular part of professional life.

The brief was to transform the existing dated and disjointed space into a modern, inspiring and functional interior for students to work both individually and as groups. The space had to be flexible so it could be used for focussed work, group study as well as for meetings and events. With such a wide remit, managing the acoustics in the space was paramount and we were thrilled that our ceiling baffles were chosen to deliver acoustic comfort to this historic space.

The Klimatec 160 is a high performance solution for passive and low carbon buildings. Not only does it offer superb thermal insulation and an airtight seal, but it also benefits from 30-minute fire protection. The Klimatec 160 is the latest product in the Premier Loft Ladders range to be certified by the Passivhaus Institut (PHI) for use in passive buildings. It offers very high thermal insulation, achieving a U-value of just 0.34 W/m2K. It also features a class 4 certified airtight seal. As such, it is extremely effective at keeping the warmth in the building.

Bolton Gate’s Superior folding shutters have been specified and used on over 100 Fire Stations in Hong Kong & Macau, the latest being the station built to service the infrastructure associated with the new Hong Kong–Zhuhai-Macau bridge, the longest sea-bridge in the world. The doors are designed to meet an onerous specification including typhoon loads up to 3kPa and fast operating speeds (approximately 700mm per second). They are designed and manufactured in the UK and shipped to Hong Kong where they are installed by Deacon & Co., Bolton Gate’s local agent.

The FM company of a large Yorkshire Hospital engaged with wall & door protection specialists, Yeoman Shield, to resolve the unsightly and problematic damage that was occurring to fire doors in a busy specialist unit.Such damage, caused by the everyday passage of people, trolleys and equipment, if not attended to, may have become detrimental to the functioning of the fire doors.Yeoman Shield were able to provide a comprehensive fire rated door protection system, which when installed does not affect the fire integrity, to help combat and break the damage cycle, helping to prolong the life of the doors.Door Edge protectors, either FD60 or FD30, according to a doors rating, were installed to the vulnerable leading and hinged edges of the door to prevent chipping and splintering and helping to maintain the recommended 3mm gap between doors and frames.The leaves of the doors were covered with Yeoman Shield’s 2mm thick FalmouthEx protection panels at either full or half height dependent on where the impact was more prevalent, preventing dents or holes from manifesting in the future.Standard glazing beads were replaced with PVCu clad units, complete with corresponding intumescent strip, helping to protect an element of the door much prone to damage.A further part of the fire door refurbishment project was the addition of an Architrave and Stop Lath protection system. These systems come complete with hardwood (stop lath) or MDF core (architrave) with a PVCu cover and as such not only becomes resilient to impact damage but eliminates the requirement for redecoration and repair.Yeoman Shield were able to provide fire certificates for all parts of their fire door protection system offering compliance assurance to the client.For more information on Yeoman Shield cost effective wall & door protection systems go to www.yeomanshield.com or call 0113 279 5854.

Degaflex Fire Rated Roofing system providing a watertight finish, either smooth or textured. This installation was required to overcome a long standing issue with water ingress / leaking through the roof.The building was an outhouse in Snodland, Kent. The roof had been leaking for some time, Degaflex was installed onto a felt substrate by London GRP Roofing Ltd.Stephen Knuckey, the Director of London GRP Roofing Ltd. posted on LinkedIn ‘Our #Degaflex overlay. Safe to say I’m extremely pleased with the finish on this. Being a felt overlay and turning out this smooth, I’ll be looking forward to applying it directly to an OSB deck.’

Fire resistant, multi-directional, high movement, structural joint sealing of floor slabs from below for 120minutes, EI Fire ratings using Emshield-DFR from NCC Movement joints Limited.St William is a division of Berkely Homes, predominantly working on some of the most technically complex regeneration projects on brownfield sites, at the heart of communities across London, and typically with a landscape-led approach. Riverside Park and Gardens is being developed on the former Leven Road Gasworks in Poplar, East London, forming part of the 20 acres Aberfeldy Village scheme. This is an ambitious regeneration project in the borough of Tower Hamlets, with around 3000 new homes, plus shops, offices, cafes, bars, and a cinema, as well as extensive landscaped gardens, play areas, and riverside walks.On this important development by the River Thames, the structural floor slab joints ranged from only 15mm to 25mm wide, but they were subject to high multi-directional movement requirements, plus they required a minimum 120-minute EI Fire Rating to protect the future residents. To add to the complexity, there were shear connectors within the floor slabs that also needed protection to ensure their structural integrity in the event of a fire.An “E120” denotes that the system will not allow flames and hot gases from physically passing through the element for 120 minutes, which also explicitly denotes that the system will achieve 120 minutes ‘Integrity’ (E) and ‘Insulation (I), known as EI120, which therefore also achieves 120 minutes ‘Stability’ (R) in fire.Emshield-DFR-2 provided the ideal solution, and one which could also be rapidly installed from below in a single operation. This specialist work was completed by specialist fireproofing contractors, Gould Sealants Limited, working for Main Contractor, Morris Roe. Emshield-DFR/WFR is an EN-1366-4 tested, fire-rated movement joint, designed to be used in movement joints in exterior and interior walls where a combination of watertightness, fire-rating, sound attenuation, and thermal-efficiency are required. Key performance parameters include:-       Up to 100% joint movement (+/- 50% capability);-       100% watertight joints; -       No mechanical fixings to the structure;-       Accommodate changes in direction between the horizontal and vertical plane;-       Accommodates 3-Dimensional movements (including in shear & vertical, as well as joint expansion and contraction;)-       no additional sound concrete cut-outs required;-       Up to 4-hour fire integrity rating to EN1366-4; -       Up to 4-hour thermal Insulation rating to EN1366-4;-       High acoustic insulation & barrier performance; -       CE Approved and MarkedFor more information:Contact: David Mackay Tel: 01257 266696NCC Movement Joints Limited