"coatings and finishing treatments for metals"

Duo D411Glass Infill Top FixOrbis OS210 Glass Infill Side FixThe project aim was to deliver a world class facility and training space the new National College for High Speed Rail in Doncaster.3D photo realistic visualisations gave the contractor and architect the ability to see the impact of the twin flat balusters from the precision engineered Duo system pre-construction.With a stunning combination of powder-coated metallic uprights, complemented with stainless steel fittings to produce a dynamic and contemporary appearance, the Duo system complimented this modern building.The use of BIM along with the collaboration of Willmott Dixon, Bond Bryan Architects and numerous subcontractors allowed the project to run smoothly and to be handed over virtually defect free.

PROJECTSecondary school in Grüze 5, Dübendorf [CH]COMPLETIONOctober 2023ARCHITECTStutz Bolt Partner Architekten AGPRODUCTSTANGENTA Y100 luminaireLight distribution: 2 x 60°; light colour: 4000 K; DALI dimmable; CRI > 80; LED: 3 x 34.5 W; dimensions [L x W x H]: 1,550 x 100 x 100 mm [72 units].S7 RHOMBOS TAIFUN expanded metal ceiling system1.5 mm thickness of black sheet; mesh size: 44 x 12 x 3 x 1.5 mm; dimensions: 980 x 790 mm and 1,650 x 680 mm; powder-coated in RAL 9016 matt [576 units] The new extension to the school building at Dübendorf-Schwerzenbach blends seamlessly into the existing complex and, with a lightness of design touch and its versatile range of usage options, it takes a big step towards modern school infrastructure. This building has been designed to enable it to be adapted to suit changing requirements in future. The school building is constructed on a double gym facility, two thirds of which are recessed below ground level, receiving natural daylight through a strip of windows at the top of its walls. When needed, the TANGENTA-Y100 luminaires supplied by durlum can be switched on. These deliver high lighting intensity combined with superlative lighting efficiency. These luminaires are discretely integrated in the S7 RHOMBOS TAIFUN expanded metal ceiling system with tested ball impact resistance to fulfil the special requirements of sports hall. Combined with its small mesh size, the white, powder-coated ceiling imbues an aesthetic appeal to this hall, which is also used by the general public. All entirely in sympathy with the architectural vision.

A friendly and welcoming school based in Blackburn in the North West of England, St Stephens Church of England Primary School is a place where pupils can develop their skills in a school that is proud of its Christian values and high standards of teaching. The school has been praised for its philosophy of continuous improvement by a recent ofsted inspection, providing a nurturing environment for children.Continuing the high level of teaching facilities was paramount for the school, and after discovering that the gutters and parapets of the building were aged and leaking, it was vital that a solution was found before this caused issues.The ChallengeIn coordination with Polyroof Products Ltd a survey was scheduled to take place at the site to determine the exact nature of the issues and formulate a solution. Upon inspection it was discovered that the existing waterproofing consisted of a single-ply membrane which had become aged with various leaks being reported and localised repairs carried out with not much effect. The underlying build-up consisted of a galvanised steel metal deck and had been coated in plasticol. Once the survey was complete it was clear that the gutters and capping’s would benefit from a high-performance waterproofing system installation, this would protect from further leaks occurring.The SolutionThe System of choice for this project was Protec Xtraflex. Protec Xtraflex is a highly flexible version of the Protec system designed for coating gutters. Its fast curing technology and imperviousness to standing water fulfilled the rapid solution needed to offer durable waterproofing performance for this project. Taking into consideration the information obtained from the survey, a bespoke Polyroof specification was created to combat all of the issues discovered. The chosen Polyroof Approved Contractor to carry out the work on this project was the KSD Group, a contractor with a wealth of experience in the roofing and construction sector.Once all these aspects were in place, work could officially begin. Firstly, it was highlighted that falls and drainage were already present, so the Polyroof specification made use of the existing falls, combining this with the chosen waterproofing system. During this project, there was no need to strip back any of the existing waterproofing. It was made good where required, allowing a smooth substrate for the new system to be bonded to. Once this stage was complete, the area was cleaned and prepared for the new system by removing any dirt and debris. The Protec Xtraflex system was now ready for installation. Firstly, all surfaces that required it were primed, including the single ply existing waterproofing, which required a Polyroof SP Primer 202. During this installation, all lap joints and bolt heads were applied with Polyroof Butyl Tape and Polyroof Butyl Lap Tape, reinforcing these points before application. Pre-formed high-quality Polyroof drip trims were installed to the outer edge of the metal capping, and new flashings were also installed to cover the exposed insulation at this detail.The first coat of Polyroof Protec Xtraflex was applied to the substrate. This consisted of Xtraflex resin and Polymat 450 and was allowed to cure. Due to the rapid cure technology of the system, this only took 30 – 60 minutes, allowing for quick installation. Once complete, the second coat of Protec Xtraflex Resin was installed and allowed to cure.CompletionThe project was efficiently managed by both the contractor KSD Group and regular Polyroof Technical Services visits to ensure that each aspect of the project from start to finish was carried out within the client’s specification, time frame and budget. The project was a great success showing the high-quality work from KSD Group. The customer can now be confident that this new Polyroof Protec Xtraflex membrane will last for many decades to come.

Kingspan Klargester bespoke Commercial Treatment Plant installed in the foothills of the Cairngorm Mountains.

An industrial inspired floor finish that would act as a protective coating for one of Yorkshire’s newest and hippest events venues owned by luxury holiday hideaway company, Kip & Nook.  Hidden in the grounds of a farm in the the North Yorkshire countryside. you’ll find the whimsical world that is Kip & Nook – offering luxurious accommodation of all kinds.Kip & Nook offers three luxury cabins and a barn to stay in, as well as an uber cool converted container.The Kip & Nook property boasts a unique entertainment venue dubbed, The Workshop.The Workshop is the perfect space for social gatherings including weddings and birthdays as well as the ideal place for Kip & Nook guests to unwind after a busy day exploring the countryside.The Workshop includes a pool table, ping pong table, darts pop-up pizza restaurant and G&T and cocktails van, in a unique setting adorned with high-end vintage cars that are available to rent for the afternoon.Installed in RAL 7031 Blue Grey across the venue, Vebro’s classic self-priming solvent-free epoxy coating vebro EP Universal has been used at 0.60 kg / m² over two coats to deliver a super smooth, super glossy industrial-look floor finish.vebro EP Universal is best suited to coat floors in medium duty dry processing areas where a hard-wearing floor finish is required.This two-component product is easily applied, either by roller or rubber squeegee, and demonstrates excellent resistance to chemicals and cleaning agents. The system’s all round performance protects concrete substrates against a range of day-to-day service criteria. The material is available in a wide range of standard RAL or BS 4800 classic shades. 

University Coventry Hospital is situated in the Walsgrave on Sowe area of Coventry and is part of the University Hospitals Coventry and Warwickshire NHS Trust. The hospital opened in 2006, replacing Walsgrave Hospital the original hospital at the site.Twinfix was approached by Principal Contractors William Gough to design, manufacture and install a walkway from the helipad on the first-floor deck to the hospital’s Accident and Emergency department. The requirement was for a robust walkway that was structurally sufficient to withstand the usual weather forces and the down draught from a helicopter in close proximity.Liaising closely with William Gough and designer Pinnegar Hayward Design, the expert team at Twinfix designed, manufactured and installed a 240 sqm free-standing mono-pitch canopy with vertical perforated side panels. This impressive canopy design included lockable double leaf gates to secure the area.The roof comprises of our Multi-Link-Panel Non-Fragile (NF) system powder coated to RAL 5010 – gentian blue and glazed with 16mm multiwall polycarbonate, and the vertical panels were powder-coated to RAL 7037 – dusty grey. As this metal does not rust in use, the walkway will keep its good looks throughout its long life.

This building was once home to the Henderson Garage door production facility, with the client in the process of renovating the entire premises to be split into several new warehousing and office units. To be able to secure new tenants, however, there was an urgency to stop a mass amount of water ingress into the building, due to the roof's years of neglect.Systems in useHyranger®Starcoat® RChallengesThe state of the existing waterproofing was poor, meaning it needed to be stripped back to the metal deck below. Given the years of water ingress it was clear some areas of the substrate were deteriorating and would need replacing.There was also an issue with the adjacent metal cladding to the perimeter of the roof space, one of which was coated in an asbestos paint and the potential for asbestos rope within the old rooflights. All of this needed addressing prior to the roofing works commencing.SolutionsAxter were called to initially survey the roof area, highlighting the main areas of concern and interface issues. Following a roof condition survey report, proposals were put forward as to how best to detail waterproof these areas and achieve the brief set out by the client.To the metal cladding, Starcoat R cold applied liquid bitumen PU resin was used to create a waterproofed upstand without the need for the complete removal of the cladding. Upon discussions with the building owner, it was also discovered that the existing rooflights were no longer needed, so these were boarded over and waterproofed in line with the rest of the main field area.The Hyranger system, comprising polyester reinforced SBS polymer modified bitumen membranes, was ideal for the job due to its guarantee strength, stability, performance and cost efficiency.The completed roof gained a 20 year guarantee and extended the life of the building.

As part of the Lincoln High Street improvement scheme Lincolnshire County Council required seating with a significant visual presence to be used as part of traffic-calming measures as well as providing useful short term seating for shoppers. Furnitubes’ in-house designers developed a unique circular bench for the scheme. The steelwork was supplied in a hardwearing corten effect nylon coating, with the iroko hardwood slats in a finish coat to maintain good long term colouration. Overall the scheme has provided this section of Lincoln High Street with a new lease of life.

Project/location Aula Magna Università Torino –University of Turin in North West Italy is one of the oldest Universities in Europe but continues to play an important role in research and training, ranking 3rd in Italy for Universities covering these activities. This new build project in a lecture theatre in the faculty of Journalism and Literature project was part of ten-year construction project on the University site. For a modern floor finish in keeping with the design of the building a seamless finish was required – in total 301 m2 was installed in October 2020 with the Sherwin-Williams SofTop SL system and 61 m2 of Resuflor HB epoxy floor coatings.The concrete screed sub-base was poured in August. A comfort floor type finish was requested which would have sound absorbing characteristics and have a soft touch. The products being used needed to have extremely low VOC (volatile organic compound) content and have no smell when being applied. The finishing coating of the SofTop system installed was Resupen WB Colour which carries the Eurofin Gold certification for indoor air comfort which confirms that the product fulfils low odour product emissions.Product/technical spec including mechanical grinding and application of angle profiles using epoxy screed including the vertical parts.Following preparation Resuprime pure epoxy resin primer was applied at 400 gr/sqm and broadcasted with a 0,3-0,5 silica quartz to enhance intercoat adhesion with the resin topping. Once cured the SofTop SL polyurethane self smoothing floor system was installed, which uses a body coat SofTop SLR Flex with a UV stable seal coat of Resuflor WB Colour. Under the seated areas an application of a scratch coat using Resuflor HB was applied at 600 g/sqm which was abraded and then another coat of Resuflor HB Ral 7038 applied at 800 gr/sqm. Steps and walking areas were installed with SofTop SL system in Ral 7038 at 3000 gr/sqm to provide 3mm thickness.   The whole area involved sanding the vertical parts to remove roughness of epoxy screed and drops of the resin from horizontal application. This involved using sandpaper with grit 60 to horizontal surfaces and vacuum this ready to be coated. An application of 75 gr/sqm of Resupen WB Colour Ral 7038 was applied. SofTop floors provide extreme durability and robustness, yet retain a soft and comfortable finish which is modern and attractive for diverse applications. Designed with footfall and wear in mind the finish is so tough it’s suitable for industrial areas as well as commercial and domestic facilities. The SofTop range offers a choice of 3 flooring systems providing varying thicknesses with degrees of bounce and flexibility.SofTop SL used at Turin is typically installed at 2-4 mm thickness and is recommended for industrial and commercial areas subject to normal traffic. The system has a high wear resistance, high chemical resistance and medium resistance to shocks. The floor is suitable for dry areas such as schools, laboratories, corridor areas, electronic companies and health care facilities, etc. Where footfall occurs SofTop finishes are good for the back due to the soft impact effect. With many traditional hard floors, regular users can find they experience difficulties with back issues from walking on an unyielding surface. The soft finish provided with SofTop systems provides sound absorbing ergonomics, improving the acoustic properties of the building and reducing acoustic impact on other areas of the building. Systems deliver thickness for strength but with a soft finish which has excellent resistance to sharp objects, impacts, shocks and dropped objects, minimising the chance of remedial repairs being required. Being self smoothing polyurethane SofTop is one of the fastest ways to lay a flooring system and to create a beautiful and durable foundation that completes a construction or refurbishment. The SofTop floor systems available can be ready to receive traffic after only 24 hours. Because Sherwin-Williams systems are seamless and impervious to handle humid conditions, spills that stay on the surface can be easily cleaned and hygiene maintained, with no contamination. 

The recently opened Tameside Macmillan Unit offers cancer treatment and support services to local residents. To help create a calming and healing environment for patients, bespoke artwork, bright colours and natural finishes were incorporated into the interior design. CS Acrovyn wall protection solutions were used to help create a welcoming and functional facility. Stylish HR6CS timber Handrails provide mobility support in general circulation areas, whilst Acrovyn Crashrails, Corner Guards and textured Sheet offer necessary impact protection to walls and corners in waiting and clinical areas. CS wall protection solutions ensure the centre remains functional, damage free and easy to clean.

Failing factory gutters get the Plygene Gutterline treatment to put an end to historical leaks.

Kingspan Klargester bespoke Commercial Treatment Plant installed by the tranquil shores of Dornoch Firth.

Dana Farber Cancer Institute is a comprehensive cancer treatment and research center in Boston, Massachusetts.

Project: Birmingham Energy Innovation CentreDate: 2020 Background:·        APL were engaged to provide a non-combustible construction solution to meet challenging acoustic and thermal performance requirements for the roof and walls·        APL were able to meet the clients requirement for matching solid and perforated profiles·        APL provided all structural, thermal and acoustic calculations Systems:·        2,000m² of APL built-up pre-coated aluminium roof system, using the sinusoidal AP18HR and trapezoidal AP31/1000RR profiles·        1,300m² of APL built-up aluminium wall system, using the sinusoidal AP18HR and AP45HR profiles with both pre-coat and PPC finishes·        800m² of APL perforated aluminium wall system, using the AP45HR-Airwall™ profile with a PPC coating·        Bespoke featured fins in aluminium with an anodised-look PPC coating·        APL Tritherm™ GALV sub-framing ·        All flashings, fixings and accessories  Building Location:·        Birmingham

The team at Moorlands Lodge Care Home, situated in the Surrey South Downs are there to welcome you for a guided tour around the home and discuss your specific care needs.Moorlands Lodge Care Home sits in a beautiful rural location, surrounded by local places of interest including National Trust properties, gardens, and art galleries, and with excellent transport links to nearby Guildford and London. Only a stone’s throw from the bustling market towns of Haslemere and Farnham, Moorlands Lodge Care Home offers a warm and welcoming environment and the very best in residential care, nursing care and dementia care. With 97 rooms, residents can choose between one-bedroom, two-bedroom, and studio apartments, all with en-suite shower rooms and some with kitchenettes.The Una was used in this building. The Una is a timber leaf riser door system with a concealed metal frame. Provided as a full metal door set, made to size and delivered to site as a flat-packed kit prepared for all ironmongery. The wood door leaf comes with hinge cut-outs and can be primed for on-site finishing or pre-finished in our factory. Choose from non-fire rated or fire rated to E30 or E60.

Standing at an impressive 140 metres high, Vestas’ wind turbine stands at the Danish National Test Centre for large wind turbines, where it is producing electricity for around 7,500 homes. The impressive structure – which has a rotor area the size of three football fields – needs a robust coating system to protect it from the corrosive saltwater atmosphere. As a long-standing Vestas supplier and development partner, it was natural that Vestas ask us to provide a protective coating system for the V-164 8.0 MW prototype.Due to the tower’s size, special vehicles are required to move the pieces. As well as anti-corrosive protection, the coating system has to deliver excellent abrasion resistance in order to protect the tower during transport and installation. Vestas chose to use our standard protective coating system for wind turbines, which is proven to deliver excellent anti-corrosion performance, robust abrasion resistance and lasting weather and UV resistance.Vestas chose a highly durable protective coating system for both the interior and exterior surfaces. The exterior surface is categorised as C5-I (high) according to ISO 12944, and our coating system comprised Hempadur 4774A, a self-priming high-build epoxy, followed by a layer of Hempathane HS 5561B, a two-component, aliphatic polyurethane finish. The internal surfaces have a lower corrosive categorisation and were coated with two layers of Hempadur 4774A.

Formerly the home of AstraZeneca, Alderley Park is a world-leading life science and innovation campus situated across 93,000 sqm on the outskirts of Manchester city centre. With a mix of new-build waterproofing requirements and existing roof refurbishments, the client appointed Garland UK as a roofing partner across the multi-building site. Alongside the refurbishment and new-build site works, Garland UK was also briefed to provide a tailored design specification for the Glasshouse Project, which would become the largest triple pitched standing seam roof in the UK.Garland UK's 3 system portfolio of high-quality bituminous membranes, cold applied liquid coatings and profiled metal ensured that each roof would get the right system for its unique challenge.

Delamere is a residential like no other, raising the bar when it comes to care. Brining together the latest and best therapeutic, somatic and healing practices they insist on providing a welcoming, and nurturing environment and believe passionately that recovery can be fun. Wirquin were part of the project of building Delamere providing bathroom frames. The Initio was the obvious option for this build offering the perfect solution for compact spaces. The large front panel means there is easy access for maintenance, perfect for hospitality. The design and push plate offer a touch of class and luxury which the Delamere offers in bundles. There are number options of push plates to pair with the Initio making it even more versatile and enabling you to match to any decor. The Initio also boasts a durable metallic structure which is coated in a anti corrosion solution and tested up to 400kg. 

The Challenge Oc’Via Construction, the partnership building the £2bn TGV Fast Rail line to Montpellier in France, entrusted the treatment of its wastewater to BioKlar Ltd, part of the Marsh Industries Group, commencing in January 2013 with the supply, installation and maintenance of a 340pe wastewater treatment plant at the Central Administrative Centre near Nîmes. The variable nature of the load, combined with stringent French and local Authority requirements in this environmentally sensitive area, were a particular challenge. See the link to our website for more details

Location: Westminster, LondonProject Type: Housing & Retail unitDevelopment Cost: £7mProduct: Rainscreen Panels with Relief MotifMeridian Wall CopingsVertical KwikFix CladdingKwikFix Soffit Planks to Balconies & Winter GardensFinish: IGP Dura XAL 4201 Style 26 MetallicClient: Taylor Wimpey Central LondonArchitect: Darling AssociatesMain Contractor: McAleer & Rushe LtdSub Contractor: KTD Facades Ltd

This development includes large areas of external elevations & soffits cladded in Accoya. Accoya was also used for the Brise Soleil canopy detailing on the drive-through lane & the double height curtain walling pictured on the front elevations. For this natural aesthetic the pre-finished Accoya profiles were given one (natural plus-ctec) base coat & three top (sansin translucent) coats. As one of the most durable products on the market, Accoya is the ideal material for projects such as this. Accoya is 75% less likely to shrink & swell in variable weather, allowing it to retain its structural integrity.

This foundry was previously known as the Leeds Copperworks and has played host to industrial breakthroughs, royal visits, and was the workplace of a 5,000 strong workforce before it closed in 1980. Preparation included diamond grinding and shotblasting. Solution Resuprime OT oil-tolerant primer was applied to prevent delamination. This was finished with two coats of Resucoat HB, a high-build, low odour, epoxy resin industrial floor coating for high impact and wear resistance. Outcome The site has been refurbished with buildings re-roofed and re-clad and a modern warehousing and distribution facility created.

This client had an untreated deck that had degraded due to UV exposure and needed it restored and finished. this was achieved by using Net-trol Wood Cleaner & Colour Restorer followed by D1 Pro Saturating Oil.Cleaning and preparing an IPE Deck for FinishingBefore using Net-Trol you need to ensure that your surface is cleared of debris – a good sweep should suffice.The surface then needs to be made wet and Net-Trol should then be scrubbed into the surface. We recommend using a stiff brush, then leave it to stand for approximately 20 minutes.Then it should be rinsed whilst scrubbing ,again with a stiff brush. Try to use the highest pressure water source you can (a pressure washer is ideal but a hose will suffice).Your surface then needs to be left for at least 48 hours to dry completely before applying your finish.Why use Owatrol’s D1 Pro?In this case, the client has chosen to finish their IPE deck with Owatrol’s D1 Pro, a product from our Professional Range which is a saturating wood oil for hardwoods giving a long-lasting natural finish and advanced UV protection.This product is well-suited for use in heavy-traffic areas such as decking and areas exposed to harsh weather. This is because it has a long-lasting finish that will protect in the years to come with minimal maintenance.It’s also perfect for dense, oily or greasy woods which are difficult to impregnate with saturating products. D1 Pro delivers excellent wood penetration and can protect even these more difficult woods from within.As such it was perfect for this project as it is made from IPE Decking which is an extremely hard wood decking (approximately 3 times harder than oak!).Many high street products would not have been able to provide adequate saturation in a wood as hard as this and therefore would not provide the long-lasting protection offered by D1 Pro.Finishing a deck with D1 ProOwatrol’s D1 Pro is a saturating wood oil protection. This means that its place is inside the wood not on top of it.To apply a saturating oil you need to apply ‘wet on wet’ coats. This means that the surface cannot be allowed to dry in between coats. If this was to happen then the D1 Pro that had been absorbed so far would start working and prevent any further moisture from penetrating the wood!This sounds a little scary but it really isn’t.The key is to work on small sections at a time (an area which can be completed in around 15 minutes). You need to apply the first coat and allow it to be absorbed for around 15-20 minutes but do not allow it to become surface dry.You then continue to apply coats until no more oil can be absorbed and the wood is saturated. At this point be sure to brush away any excess D1 Pro sitting on the surface to prevent shiny patches.Be sure to work along the length of your decking boards and always work an entire board at once. Never stop mid-board to prevent uneven coverage.Once this is completed you will have a deck protected for the long-haul with minimal maintenance required.Regular washing with Net-Trol is optional but will help to maintain the look of your deck. The look of the deck will gradually lighten over time; when it returns to a grey colour it is time for a maintenance coat. You apply it in exactly the same way but usually only 1-2 coats is necessary.You can also apply a maintenance coat in just a small localised area if that’s all that is necessary. No sanding or stripping required!The finished resultsAs you can see the results are stunning! The client can be safe in the knowledge that their deck is protected for years to come from damage caused by UV rays and moisture.On top of this, they know that they will need to do minimal maintenance. If the deck begins to look worn in high traffic areas, they’re able to carry out touch-ups easily.

Blackhorse Mills occupies the land of the former Ferry Lane industrial site next to Walthamstow’s High Maynard Reservoir. Architects consulted Powdertech early in the project to discuss the look and feel they had in mind for the buildings and ensure that the design of the extruded aluminium cladding panels together with the right powder coating finish would achieve the desired effect. A series of development samples were produced to combine the warm terracotta shade and sheen thus creating a unique finish. The finish carries a 25 year guarantee for gloss, colour and adhesion and is Qualicoat class 1 approved.

The overall aesthetic appearance of this project was very important. Originally, traditional metal roofing was considered, but the client had reservations with possible noise issues and theft problems, and local planning constraints did not permit the use of traditional slate. So, Williams Roofing Contractors of Chandlers Ford were tasked in finding an alternative solution.Polyroof’s BBA approved 185 GRP System can replicate the look of metal sheeted roofing at a fraction of the weight and the price and, having no scrap value, is not prone to vandalism or theft.The contractor worked closely with the Polyroof Technical Department, the client, and the planners to produce a detailed specification for the project incorporating pre-formed trims to create a lead effect. The system was successfully installed within the project time frame and upon completion was given the usual insurance-backed 20 year guarantee from Polyroof Products Limited.Polyroof’s simulated metal finishes are achieved through the installation of Polyroof pre-formed GRP trims which are fixed to the deck or substrate prior to the application of the Polyroof waterproofing membrane. The project was nominated for the LRWA Roofing Awards due to the high level of intricate detailing that was undertaken and the care that was taken to ensure that all preformed profiles were fitted in balanced, parallel positions. The overall attention to detail by the Polyroof approved skilled operatives was first class.

The Ongar Academy Product: NORclad European Redwood with NORclad Brunnea treatment Working closely with the Architects initially, a specification was created utilising a PEFC-certified NORclad® European Redwood. Brunnea treatment was requested to offer a formal warranty on the product for 30 years against rot and fungal decay (out of ground contact), along with a good level of colour stability VS traditional untreated species. Over 19,000/LM was supplied in a square edge 20 x 45mm profile with almost a fifth of the product being fire treated.

Sylan Veneer installed at Majestic, City Square in Leeds. This Grade A office building has been designed to provide a flexible, contemporary working environment in a superb prime location.Sylan Products Supplied:Real Wood Veneer Toilet CubiclesFlush fronted, Real Wood Veneer cubicle systemStrong, secure and luxurious finishInvisible fixing systemFull height cubicleFSC CertifiedAvailable in 11 Real Wood VeneersReal Wood Veneer Duct PanellingAllows continuity in designCan match panelling to cubiclesFSC certifiedAvailable in 11 Real Wood Veneer finishesSolid Surface Washtrough with Veneer UnderpanelsModern designMetal frame systemQuick and easy to installFSC certifiedAvailable in 11 Real Wood Veneer finishesMatch your panelling to your cubicles

Phase 2 of the Aston Student Village project, providing high standard accommodation for more than 3,000 students, the scheme is one of the biggest regeneration projects in the Midlands. Including installation Dempsey Dyer tendered for the project with the Deceuninck 2500 Chamfered suite in RAL 7016 Anthracite Grey using the unique & patented Decoroc coating externally and traditional white internally. Decoroc provides a quality and durable finish and is guaranteed not to peel, crack or fade, unlike many lesser coatings. Dempsey Dyer worked closely with Deceuninck during the specification process to ensure that all requirements were met.

The outdoor areas at this new build school were given the VIP treatment with a series of canopies, seating, and cycle parking facilities.

BACKGROUND: The Pavilion was being refurbished, ready to be re-open as a new café to help increase tourism to the town.Plans included creating a new terrace at the front, a small rear extension, and a portable office/store at the back.REQUIREMENT: A modular ramp to the terrace for pedestrian and wheelchair use. END RESULT:Our installers fitted a Rapid Ramp, which included a pedestrian walkway with a loading capacity of 1,000kgs. It is designed to safely support the weight of varies public traffic, including walkers, prams, wheelchairs, and mobility scooters.The installation was completed within a few hours on a snowy late evening.FEATURES INCLUDED: Mesh Platform - self-draining mesh allows water to pass through rather than collect on the surface.Trombone Ends - these are added to the ends of a Rapid Ramp to prevent clothes catching.Telescopic Legs - these can be adjusted to accommodate threshold heights.Continuous Handrail - this handrail system ensures users always have a support to hold onto.Standard Colour Black - ramps are powder-coated black to create a hard finish that is tougher than conventional paint.EXTRA FEATURES INCLUDED:Infill Handrail - this product prevents users from climbing or falling through gaps.Yellow Tread - this is a safety feature designed to help those with impaired vision identify the nose of the ramp and helps users distinguish any level changes.CONCRETE VS PEDESTRIAN METAL RAMP INSTALLATIONS:Unfortunately, newly poured concrete must be protected from freezing for the first 24 to 48 hours and requires drying time before use. Therefore, concrete installations are heavily reliant on good weather conditions, and cannot be completed in snow or frozen temperatures.Unlike concrete, our pedestrian ramps can be installed in most weather conditions, including snow. Plus, the product is manufactured from galvanised steel.Galvanising is a process where a protective coating of zinc is applied to prevent rusting and to kill moss.

We installed our Marathon Glass Wet Lockers, Cabrillant 600 Toughened Glass Cubicles and Marathon 600 Laminate Cubicles at Cannon Street. The Lockers are finished in Opti-White 10mm Toughened Glass with Mirror end panels and Hasp and Clasp locks. A bespoke interior, with captive coat hangers and aluminium shoe shelves was created. The markets most popular glass Cubicle system, Prospec Cabrillant, is a favourite of Gymbox, and the Black Glass gives an astounding finish reflecting the colour scheme of each changing room. In stark contrast, the WCs were finished in a Matt Solid Grade Laminate.

A Selectaglaze secondary glazing treatment to a set of patio doors in a suburban home in Cockfosters, North London makes a living room warmer and more comfortable for a couple’s new born baby. A Series 10 2-pane horizontal sliding unit was installed to the patio doors. The opening was 2m x 2m and it was important that the treatment would match the existing sightlines. Timber grounds were fixed into the reveal, which had skirting boards. Installers scribed into the timber frame to create matching grooves and nuances to fit snug in the reveal and over the skirting.

Sandwiched between a retail unit and some 2000 square feet of office space, the seven storey shuttered façade reflects the historical military tailors that used to occupy this part of London. Their tailoring techniques, forms of embroidery and bronze detailed shop fronts were an inspiration for the architects Squire and Partners, whose detailed design of the bronze panelled façade, included glimpses of deep red in the shutter reveals with 45mm diameter punched holes intended to replicate the stripes on a Sergeants uniform. Fabricated on a CNC turret punch press using high grade J57S UP aluminium, the exterior featured hook on Unity rainscreen panels finished in bronze anodised and aluminium infills in a red polyester powder coating. The balcony detail was enhanced with impressive folding shutter doors designed to offer, security, shading, ventilation and noise control from the streets below. The outer skin to the shutters was finished in bronze anodised to match the exterior panels. They also featured a regency gold anodised finish to the side plates and a red polyester powder coating to the interior screen that when folded added to the aesthetic design of the building.

Located at Aberdulais Crescent in Cardiff, each of the twelve properties is a traditionally-built bungalow built fifty five years ago. From the outset, the roofing material utilised on each home was manufactured from metal, although they used standard metal sheeting instead of the advanced metal roof tile Metrotile produces.

In Vlaardingen Museum, the Netherlands, old meets new. The use of concrete, aluminium and glass creates a powerful sense of open space and transparency. The many level changes and loft-like spaces meant it was important to find a balustrade solution unobstructed by a conventional handrail or metal grip. The Easy Glass Pro structural glass balustrade offered the ability to make fine adjustments to the positioning of each glass panel from the installation side – invaluable when being installed on the various sections of finished concrete flooring levels.

Spitbank Fort was originally built in 1878 and was part of a group of forts designed to defend the mouth of the Solent. This project created challenging circumstances for wood flooring because the structure is metal and is over 130 years old. Surrounded by sea creating high, fluctuating humidity and the structure was round so most of the boards had to be re-manufactured to fit. There were height restrictions because there were numerous arches creating low points and all the services had to be laid on the existing substrate thus raising the finished floor level to accommodate them